Input Name	Type
ReportGraphListInfoIterEnd	ReportGraphListInfoIterEnd
Output Name	Type
ReportGraphListInfoIterEndResult	ReportGraphListInfoIterEndResult

Error Name	Description
EINVALIDTAG

Returns items From a previous call To ReportGraphListInfoIterStart

Input Name	Type
ReportGraphListInfoIterNext	ReportGraphListInfoIterNext
Output Name	Type
ReportGraphListInfoIterNextResult	ReportGraphListInfoIterNextResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Initiates a Query for a list of Graphs for a particular report.

Input Name	Type
ReportGraphListInfoIterStart	ReportGraphListInfoIterStart
Output Name	Type
ReportGraphListInfoIterStartResult	ReportGraphListInfoIterStartResult

Error Name	Description
EDATABASEERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTAMBIGUOUS
EREPORTNOTFOUND

Terminate a View list iteration and clean up any saved info.

Input Name	Type
ReportListInfoIterEnd	ReportListInfoIterEnd
Output Name	Type
ReportListInfoIterEndResult	ReportListInfoIterEndResult

Error Name	Description
EINVALIDTAG

Returns items From a previous call To ReportListInfoIterStart

Input Name	Type
ReportListInfoIterNext	ReportListInfoIterNext
Output Name	Type
ReportListInfoIterNextResult	ReportListInfoIterNextResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Initiates a Query for a list of Reports that can be scheduled.

Input Name	Type
ReportListInfoIterStart	ReportListInfoIterStart
Output Name	Type
ReportListInfoIterStartResult	ReportListInfoIterStartResult

Error Name	Description
EAPIERROR
EDATABASEERROR
EINVALIDINPUT
EREPORTAMBIGUOUS
EREPORTNOTFOUND

Deletes a report output.

Input Name	Type
ReportOutputDelete	ReportOutputDelete
Output Name	Type
ReportOutputDeleteResult	ReportOutputDeleteResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EREPORTNOTLICENSED
EREPORTNOTSCHEDULABLE
EREPORTOUTPUTDELETEERROR
EREPORTOUTPUTNOTFOUND

Input Name	Type
ReportOutputListInfoIterEnd	ReportOutputListInfoIterEnd
Output Name	Type
ReportOutputListInfoIterEndResult	ReportOutputListInfoIterEndResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Input Name	Type
ReportOutputListInfoIterNext	ReportOutputListInfoIterNext
Output Name	Type
ReportOutputListInfoIterNextResult	ReportOutputListInfoIterNextResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Input Name	Type
ReportOutputListInfoIterStart	ReportOutputListInfoIterStart
Output Name	Type
ReportOutputListInfoIterStartResult	ReportOutputListInfoIterStartResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTAMBIGUOUS
EREPORTNOTSCHEDULABLE
EREPORTOUTPUTNOTFOUND

Reads report output data From a file. API will fail if Length exceeds 1 MB.

Input Name	Type
ReportOutputRead	ReportOutputRead
Output Name	Type
ReportOutputReadResult	ReportOutputReadResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EREPORTNOTSCHEDULABLE
EREPORTOUTPUTFILENOTFOUND
EREPORTOUTPUTFILEREADERROR
EREPORTOUTPUTNOTFOUND

Add a new report schedule.

Input Name	Type
ReportScheduleAdd	ReportScheduleAdd
Output Name	Type
ReportScheduleAddResult	ReportScheduleAddResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTAMBIGUOUS
EREPORTNOTLICENSED
EREPORTNOTSCHEDULABLE
EREPORTSCHEDULEDUPLICATE

Deletes a report schedule.

Input Name	Type
ReportScheduleDelete	ReportScheduleDelete
Output Name	Type
ReportScheduleDeleteResult	ReportScheduleDeleteResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTNOTSCHEDULABLE
EREPORTSCHEDULEDELETEERROR

Disable a report schedule.

Input Name	Type
ReportScheduleDisable	ReportScheduleDisable
Output Name	Type
ReportScheduleDisableResult	ReportScheduleDisableResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTNOTSCHEDULABLE

Enable a report schedule.

Input Name	Type
ReportScheduleEnable	ReportScheduleEnable
Output Name	Type
ReportScheduleEnableResult	ReportScheduleEnableResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTNOTLICENSED
EREPORTNOTSCHEDULABLE

Input Name	Type
ReportScheduleListInfoIterEnd	ReportScheduleListInfoIterEnd
Output Name	Type
ReportScheduleListInfoIterEndResult	ReportScheduleListInfoIterEndResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Input Name	Type
ReportScheduleListInfoIterNext	ReportScheduleListInfoIterNext
Output Name	Type
ReportScheduleListInfoIterNextResult	ReportScheduleListInfoIterNextResult

Error Name	Description
EACCESSDENIED
EINTERNALERROR
EINVALIDINPUT
EINVALIDTAG

Input Name	Type
ReportScheduleListInfoIterStart	ReportScheduleListInfoIterStart
Output Name	Type
ReportScheduleListInfoIterStartResult	ReportScheduleListInfoIterStartResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTAMBIGUOUS
EREPORTNOTSCHEDULABLE

Modify a report schedule.

Input Name	Type
ReportScheduleModify	ReportScheduleModify
Output Name	Type
ReportScheduleModifyResult	ReportScheduleModifyResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTAMBIGUOUS
EREPORTNOTLICENSED
EREPORTNOTSCHEDULABLE
EREPORTSCHEDULEDUPLICATE

Runs a report schedule at that instant of time.

Input Name	Type
ReportScheduleRun	ReportScheduleRun
Output Name	Type
ReportScheduleRunResult	ReportScheduleRunResult

Error Name	Description
EACCESSDENIED
EDATABASEERROR
EINTERNALERROR
EINVALIDINPUT
EOBJECTAMBIGUOUS
EOBJECTNOTFOUND
EREPORTNOTLICENSED
EREPORTNOTSCHEDULABLE

Terminate a View list iteration and clean up any saved info.

Name	Type	Description
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

[none]

Returns items From a previous call To ReportGraphListInfoIterStart

Name	Type	Description
Maximum	xsd:integer	The Maximum number of entries To retrieve. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

Name	Type	Description
GraphList	ArrayOfGraphInfo	A list of Graphs.
Records	xsd:integer	The number of Records actually returned. Range: [0..2^31-1].

Initiates a Query for a list of Graphs for a particular report.

Name	Type	Description
ReportApplication	ReportApplication optional	Specifies the application To which the report belongs.
ReportNameOrId	xsd:string	Name of the report for which Graphs have To be listed. For custom Reports it can either be Name or Id. Range for Id: [1..(2^31)-1]
TargetObjectNameOrId	ObjNameOrId	Name or Id of the object for which Graphs have To be listed. Range for Id: [1..(2^31)-1]

Name	Type	Description
Records	xsd:integer	Number indicating how many items are available for future retrieval with ReportGraphListInfoIterNext. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store. Used in subsequent calls To ReportGraphListInfoIterNext or ReportGraphListInfoIterEnd.

Terminate a View list iteration and clean up any saved info.

Name	Type	Description
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

[none]

Returns items From a previous call To ReportListInfoIterStart

Name	Type	Description
Maximum	xsd:integer	The Maximum number of entries To retrieve. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

Name	Type	Description
Records	xsd:integer	The number of Records actually returned. Range: [0..2^31-1].
ReportList	ArrayOfReportInfo	A list of Reports that can be scheduled.

Initiates a Query for a list of Reports that can be scheduled.

Name	Type	Description
ReportApplication	ReportApplication optional	Specifies the application for which Reports have To be listed. If not specified then all the Reports are listed.
ReportNameOrId	xsd:string optional	Specifies the Name of report To be listed. For custom report Id can be specified. Range for Id: [1..(2^31)-1]
ReportType	xsd:string optional	Specifies the Type for which Reports have To be listed. Possible Values: 'custom', 'built_in'.

Name	Type	Description
Records	xsd:integer	Number indicating how many items are available for future retrieval with ReportListInfoIterNext. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store. Used in subsequent calls To ReportListInfoIterNext or ReportListInfoIterEnd.

Deletes a report output.

Name	Type	Description
ReportOutputId	xsd:integer	Specifies the Id of the report output. Range: [1..(2^31)-1]

[none]

Name	Type	Description
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

[none]

Name	Type	Description
Maximum	xsd:integer	The Maximum number of entries To retrieve. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

Name	Type	Description
ReportOutputList	ArrayOfReportOutputInfo	A list of outputs.

Name	Type	Description
IsSuccessful	xsd:boolean optional	Specifies whether the Status of the report output was successful. If the input element is not present then all (success and fail) the report outputs are listed.
ReportApplication	ReportApplication optional	Specifies the application for which Reports have To be listed. Default is 'control_center'.
ReportNameOrId	xsd:string optional	Name of the report. For custom Reports it can either be Name or Id. Range for Id: [1..(2^31)-1]
ReportOutputId	xsd:integer optional	Specifies the Id of the report output. If this is specified then filtering based on ObjectNameOrId and ReportScheduleNameOrId is ignored. Range: [1..(2^31)-1]
ReportScheduleNameOrId	ObjNameOrId optional	Specifies the Name or Id of the report schedule for which the output has To be listed. Range for Id: [1..(2^31)-1]
TargetObjectNameOrId	ObjNameOrId optional	Specifies one of the following: - the Name or Id of the Group. - the Name or Id of the object. Range for Id: [1..(2^31)-1]

Name	Type	Description
Records	xsd:integer	Number indicating how many items are available for future retrieval with ReportOutputListInfoIterNext. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store. Used in subsequent calls To ReportOutputListInfoIterNext or ReportOutputListInfoIterEnd.

Reads report output data From a file. API will fail if Length exceeds 1 MB.

Name	Type	Description
Length	xsd:integer	Number of bytes To read From the file. Range: [0..2^20]
Offset	xsd:integer	Offset into file To start reading From. Range: [0..(2^31)-1]
ReportOutputId	xsd:integer	Specifies the Id of the report output. Range: [1..(2^31)-1]

Name	Type	Description
FileData	xsd:string	Data read From the file. The data is is xml encoded.
Length	xsd:integer	Number of bytes actually read From the file. If this Value is 0, then you have attempted To read at or past the end of the file. Range: [0..2^20]
OutputFormat	ReportOutputFormat	The output format of the file read.

Add a new report schedule.

Name	Type	Description
ReportScheduleInfo	ReportScheduleInfo	Details of a report schedule

Name	Type	Description
ReportScheduleId	ObjId	Specifies the Id of the report schedule created. Range: [1..(2^31)-1]

Deletes a report schedule.

Name	Type	Description
ReportScheduleNameOrId	ObjNameOrId	Name or Id of the report schedule. Range for Id: [1..(2^31)-1]

[none]

Disable a report schedule.

Name	Type	Description
ReportScheduleNameOrId	ObjNameOrId	Name or Id of the report schedule. Range for Id: [1..(2^31)-1]

[none]

Enable a report schedule.

Name	Type	Description
ReportScheduleNameOrId	ObjNameOrId	Name or Id of the report schedule. Range for Id: [1..(2^31)-1]

[none]

Name	Type	Description
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

[none]

Name	Type	Description
Maximum	xsd:integer	The Maximum number of entries To retrieve. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store.

Name	Type	Description
ReportScheduleList	ArrayOfReportScheduleContentInfo	A list of report schedules.

Name	Type	Description
IsEnabled	xsd:boolean optional	Specifies whether the state of the report schedule is enabled. If the input element is not present then all (enabled and disabled) the report schedules are listed.
ReportApplication	ReportApplication optional	Specifies To list only those report schedules which involve Reports that belong To this application. Default is 'control_center'.
ReportNameOrId	xsd:string optional	Name of the report. For custom Reports it can either be Name or Id. Range for Id: [1..(2^31)-1]
ReportScheduleNameOrId	ObjNameOrId optional	Specifies the Name or Id of the report schedule To be listed. If this is specified then filtering the report schedules based on ReportNameOrId, ReportApplication, TargetObjectNameOrId if any is ignored. If not specified then only the report schedules satisfying all the conditions will be listed. Range for Id: [1..(2^31)-1]
TargetObjectNameOrId	ObjNameOrId optional	Specifies one of the following: - the Name or Id of the Group. - the Name or Id of the object. If specified, only the report schedules which have the Target object as that of the input are listed. Range for Id: [1..(2^31)-1]

Name	Type	Description
Records	xsd:integer	Number indicating how many items are available for future retrieval with ReportScheduleListInfoIterNext. Range: [1..(2^31)-1]
Tag	xsd:string	An opaque handle used by the DFM station To identify a temporary store. Used in subsequent calls To ReportScheduleListInfoIterNext or ReportScheduleListInfoIterEnd.

Modify a report schedule.

Name	Type	Description
ReportScheduleInfo	ReportScheduleInfo	Details of modifiable contents of a report schedule.
ReportScheduleNameOrId	ObjNameOrId	Specifies the Name or Id of the report schedule To be modified. Range for Id: [1..(2^31)-1]

[none]

Runs a report schedule at that instant of time.

Name	Type	Description
ReportScheduleNameOrId	ObjNameOrId	Name or Id of the report schedule. Range for Id: [1..(2^31)-1]

Name	Type	Description
ReportOutputId	xsd:integer	Specifies the Id of the report output generated. Range: [1..(2^31)-1]

Name	Type	Description
GraphInfo	GraphInfo[]

Name	Type	Description
ReportInfo	ReportInfo[]

Name	Type	Description
ReportOutputInfo	ReportOutputInfo[]

Name	Type	Description
ReportScheduleContentInfo	ReportScheduleContentInfo[]

Identification number (ID) for a DFM object. This typedef is an alias for the builtin ZAPI Type integer. Object IDs are unsigned integers in the range [1..2^31 - 1]. In some contexts, an object ID is also allowed To be 0, which is interpreted as a null Value, e.g., a reference To no object at all. The ID for a DFM object is always assigned by the system; the user is never allowed To assign an ID To an object. Therefore, an input element of Type ObjId is always used To refer To an existing object by its ID. The ZAPI must specify the object's DFM object Type (e.g. Dataset, Host, DP Policy, etc.). Some ZAPIs allow the object To be one of several different types. If the Value of an ObjId input element does not Match the ID of any existing DFM object of the specified Type or types, then typically the ZAPI fails with Error code EOBJECTNOTFOUND. A ZAPI may deviate From this general rule, for example, it may return a more specific Error code. In either case, the ZAPI specification must document its behavior.

[none]

Name or internal ID of a DFM object. This typedef is an alias for the builtin ZAPI Type string. An ObjNameOrId must contain between 1 and 64 characters, and must conform To one of the following formats: It must have the format of an ObjName, or It must be the decimal numeric string form of a positive integer whose Value is in the range [1..2^31 - 1]. Elements of Type ObjNameOrId are used only as inputs To ZAPIs. The Value must Match either the Name or internal ID of an existing DFM object. The ZAPI must specify the object's DFM object Type (e.g. Dataset, Host, DP Policy, etc.). Some ZAPIs allow the object To be one of several different types. If the format of an ObjNameOrId input element does not conform, or the Value does not Match the Name or ID of an existing object, then generally the ZAPI documents that it fails with Error code EOBJECTNOTFOUND. A ZAPI may return more specific Error codes. In such cases, the ZAPI specification must document its behavior. If a ZAPI can accept a null Value (e.g. reference To no object at all) for such an element, then the element is declared optional, and the absence of the input element represents a null Value.

[none]

Specifies the application To which a report belongs. This typedef is an alias for the built-in ZAPI Type string. Possible Values: 'control_center' 'backup' 'disaster_recovery'

[none]

The Type of output format. This typedef the built-in ZAPI Type string. Possible Values: 'csv' 'html' 'paragraph' 'perl' 'text' 'xls' 'xml'

[none]

Detailed contents of a report schedule.

Name	Type	Description
ArchivalFormat	ReportOutputFormat optional	Format of the report To be saved. Default Value is html.
EmailAddressList	EmailAddressList optional	Email addresses of recipients for a mail To be sent with an attachment when the report is generated.
GraphName	xsd:string optional	Name of the graph. The graph Name is validated as follows: - It should belong To the report Name specified. - It should be applicable To the Target object. - The License should support the graph. Maximum Length of 64 characters.
IncludeDeletedObjects	xsd:boolean optional	Include deleted Objects in the report generated. Default Value is FALSE.
ReportApplication	ReportApplication optional	Specifies the application To which a report belongs. Default is 'control_center'.
ReportNameOrId	xsd:string optional	Name of the report. For custom Reports it can either be Name or Id. Required for ReportScheduleAdd API. Range for Id: [1..(2^31)-1]
ReportScheduleName	ObjName optional	Specifies the Name of the report schedule To be created. This element is mandatory for 'ReportScheduleAdd'.
SaveAllFields	xsd:boolean optional	Saves all fields, Ignored if ArchivalFormat is not perl or xml. Default Value is FALSE.
ScheduleNameOrId	ObjNameOrId optional	Name or Id of a schedule. Required for ReportScheduleAdd API. Range for Id: [1..(2^31)-1]
TargetObjectNameOrId	ObjNameOrId optional	Specifies the Target object on which the report has To be scheduled. The object Type depends on the Name of the report specified. For ex: controller-details report can run on a Target object which is of Type Host. Range for Id: [1..(2^31)-1]

A list of email addresses. If more than one email Address is specified, the addresses must be seperated by a ','. Spaces (and other white space) are not allowed, either between addresses or in them. Unprintable characters are also invalid. The list may contain up To 255 characters.

[none]

Describes the meta data of a graph

Name	Type	Description
DeprecatedBy	xsd:string optional	Name of the graph that replaces this graph. Will be absent for non-deprecated Graphs. Only returned via the GraphListInfoIterNext api.
Description	xsd:string optional	Description of the graph. Maximum Length of 1024 characters. Only returned via the ReportGraphListInfoIterNext api.
GraphLines	ArrayOfGraphLineInfo optional	Specifies the list of Lines in the graph. Only returned via the GraphListInfoIterNext api.
GraphName	xsd:string	Unique Name of the graph. Maximum Length of 64 characters.
GraphPrettyName	xsd:string	Long Name of the graph. Maximum Length of 64 characters.
IsDefault	xsd:boolean optional	Specifies whether the graph is the default graph for the report. Only returned via the ReportGraphListInfoIterNext api.
IsDeprecated	xsd:boolean optional	true if the graph is deprecated. Only returned via the GraphListInfoIterNext api.

Name of a DFM object. This typedef is an alias for the built in ZAPI Type string. An object Name must conform To the following format: It must contain between 1 and 64 characters. It may start with any character and may contain any combination of characters, except that it may not consist solely of decimal digits ('0' through '9'). In some contexts, a Name may be the empty string (""), which is interpreted as a null Value, e.g., a reference To no object at all. The behavior of a ZAPI when it encounters an Error involving an ObjName input element depends on how the ZAPI uses the input element. Here are the general rules: If the input Name element is used To create a new object with the given Name, or rename an existing object To that Name, and the Name does not conform To the above format, then the ZAPI fails with Error code EINVALIDINPUTERROR. Note that because EINVALIDINPUTERROR is such a common Error code, ZAPI specifications are not required To document cases when they may return it. If the input Name element is used To refer To an existing object with that Name, and there is no object with that Name, then the ZAPI fails with Error code EOBJECTNOTFOUND. Generally the ZAPI specification documents cases when it may return this Error code. A ZAPI may deviate From these general rules, for example, it may return more specific Error codes. In such cases, the ZAPI specification must document its behavior. If an input Name element is used To refer To an existing object, then the ZAPI specification must specify which DFM object Type (e.g. data set, Host, DP Policy, etc.) is allowed. Some ZAPIs allow the object To be one of several different types. See the Description of ObjFullName for examples of valid input formats. Note that there is no requirement that all object names must be unique. However, the names for some specific types of Objects are constrained such that no two Objects of that Type may have the same Name. For example, this constraint applies To Datasets, DP schedules, and DP policies. This means that no two Datasets may have the same Name, but a Dataset may have the same Name as a DP schedule or DP Policy. In general, object names are compared in a case-insensitive manner. This means that, for example, "MyObject" and "MYOBJECT" are considered To be the same Name for purposes of: creating new Objects, renaming existing Objects, or looking up an object by Name. On the other hand, ZAPIs that return an ObjName generally do not change the capitalization at all. For example, if an object's Name has been set To "MyObject", then list iteration ZAPIs that return the object's Name return it as "MyObject" rather than "MYOBJECT" or "myobject". ZAPIs that operate on ObjName Values and do not follow these general rules about case sensitivity must document the rules that they do follow. One important exception To these general rules is that Volumes, Qtrees, OSSV Directories, SRM Paths, Interfaces, FCP Targets and FC switch ports all have case-sensitive names. When looking up Objects of these types by Name, the case must Match the object Name.

[none]

Describes the Name of the report.

Name	Type	Description
DeprecatedBy	xsd:string optional	Name of the report that replaces this report. Will be absent for non-deprecated Reports.
Description	xsd:string optional	Description of the report. Max Length: 1024 chars
DisplayTab	xsd:string	The tab where a report is displayed in DFM UI. Possible Values: 'Aggregates' 'appliances' 'data_sets' 'Events' 'filesrm' 'filesystems' 'Luns' 'resource_pools' 'sans' 'scripts' 'vfilers' 'others'
IsDeprecated	xsd:boolean optional	true if the report is deprecated.
OutputFormatList	ArrayOfReportOutputFormat	The list of output formats supported by report.
RbacOperation	xsd:string	The Name of the RBAC Operation required To View the report. Use RbacOperationInfoList To get the list of currently valid operations. Max Length: 255 chars
ReportApplication	ReportApplication	Application To which the report belongs.
ReportId	xsd:integer optional	Id of the report in case of Custom Reports. Range: [1..(2^31)-1]
ReportName	xsd:string	Unique Name of the report. Max Length: 64 chars
ReportPrettyName	xsd:string	Long Name of the report. Max Length: 64 chars
ReportType	xsd:string	Type of the report. Possible Values: 'built_in' 'custom'

Describes the contents of an output.

Name	Type	Description
FailureReason	xsd:string optional	Specifies the Reason as To why the output failed. Present only in case of failure. Maximum Length of 255 characters.
GraphName	xsd:string optional	Name of the graph.
ReportApplication	ReportApplication	Specifies the application To which a report belongs. Default is 'control_center'.
ReportId	xsd:integer optional	specifies the Id of the report in case of custom Reports. Range: [1..(2^31)-1]
ReportName	xsd:string	Name of the report.
ReportOutputId	xsd:integer	Specifies the output Id. Range: [1..(2^31)-1]
ReportScheduleId	ObjId	Specifies the Id of the report schedule. Range: [1..(2^31)-1]
ReportScheduleName	ObjName	Specifies the Name of the report schedule.
RunBy	xsd:string	Specifies the Name of the user who generated the report output. Maximum Length of 255 characters.
RunStatus	xsd:string	Specifies the Status of the report output. Possible Values: 'pending' 'running' 'succeeded' 'failed' 'aborted'
RunTime	xsd:integer optional	Specifies the Timestamp when the output was saved. Not present if the report output is in pending, running or aborted state. The Timestamp Value is the time in seconds since 00:00:00 Jan 1, 1970, UTC.
TargetObjectId	xsd:integer	Specifies the object on which the output was generated. Range: [1..(2^31)-1]
TargetObjectName	xsd:string	Specifies the Name of the object on which the output was generated.

Describes the contents of a report schedule.

Name	Type	Description
ArchivalFormat	ReportOutputFormat	Specifies the format in which the report is saved.
EmailAddressList	EmailAddressList optional	Email addresses of recipients for a mail To be sent with an attachment when the report is generated.
GraphName	xsd:string optional	Name of the graph. Maximum Length of 64 characters.
IncludeDeletedObjects	xsd:boolean	Include deleted Objects in the report generated.
IsEnabled	xsd:boolean optional	Specifies whether the state of the report schedule is enabled.
IsSuccessful	xsd:boolean optional	Specifies whether the last run Result was successful. This element is not present if the report schedule has not run even once.
LastRunTime	xsd:integer optional	Specifies the Timestamp when the report was last run. This element is not present if the report schedule has not run even once. The Timestamp Value is the time in seconds since 00:00:00 Jan 1, 1970, UTC.
ReportApplication	ReportApplication	Specifies the application To which a report belongs. Default is 'control_center'.
ReportId	xsd:integer optional	Specifies the Id of the custom report. Range: [1..(2^31)-1]
ReportName	xsd:string	Specifies the Name of the report.
ReportScheduleId	ObjId	Specifies the schedule Id. Range: [1..(2^31)-1]
ReportScheduleName	ObjName	Specifies the Name of the report schedule.
SaveAllFields	xsd:boolean	Saves all fields, Only in perl and xml format.
ScheduleId	xsd:integer	Specifies the Id of the schedule. Range: [1..(2^31)-1]
ScheduleName	xsd:string	Specifies the Name of the schedule.
TargetObjectId	xsd:integer	Specifies the Id of the object on which the report schedule is scheduled To run. Range: [1..(2^31)-1]
TargetObjectName	xsd:string	Specifies the Name of the object on which the report schedule is scheduled To run.

Name	Type	Description
GraphLineInfo	GraphLineInfo[]

Name	Type	Description
ReportOutputFormat	ReportOutputFormat[]

Describes the meta data of a line in a graph.

Name	Type	Description
SampleFormat	xsd:string	The format in which the sample Value is returned. Possible Values: 'integer' 'float' Range of the sample Value if integer: [0..(2^63) - 1] Range of the sample Value if float: [0..(2^63) - 1]
SampleName	xsd:string	Name of the sample. Maximum Length: 64 characters.
SamplePrettyName	xsd:string	The Name of the sample which can be used for displaying. Maximum Length: 64 characters.
SampleSuffix	xsd:string	The Unit of the sample. If the Unit is not known then 'none' is returned. Possible Values: 'bytes' 'percentage' 'minutes' 'none'