|
APIs in Category: net |
API version 1.12 |
net-config-get-active |
The net APIs provide network management from ONTAP. |
| net-config-get-active | [top] |
Output the current network config Output includes vlans, ifgrps and static routes with information from vlan, ifgrp, route & ifconfig commands
Output Name Range Type Description net-config-info net-config-info
Active network configuration.
Errno Description EINTERFACENOTFOUND
| net-config-get-persistent | [top] |
Reads filer's /etc/rc and outputs contents.
Output Name Range Type Description net-config-info net-config-info
Persistent network configuration (/etc/rc).
Errno Description EINVALIDINPUTERROR
| net-config-set-persistent | [top] |
Writes filer's persistent network config.
Input Name Range Type Description net-config-info net-config-info
Persistent network configuration (/etc/rc).
Errno Description EINVALIDINPUTERROR
| net-ifconfig-get | [top] |
Output the current configuration for one interface.
Input Name Range Type Description interface-name string
optional
This is the name of the interface to display. If not provided, all interfaces will be displayed. Output Name Range Type Description interface-config-info interface-config-info[]
configuration of interface
Errno Description EINTERFACENOTFOUND ENOPARTNERIFC EINVALIDINPUTERROR
| net-ifconfig-set | [top] |
Configure network interface. Does not modify persistent config.
Input Name Range Type Description interface-config-info interface-config-info
Interface configuration.
Errno Description EINTERFACENOTFOUND ENETMASKINVALID EBROADCASTINVALID EIOCTLERROR EINTERNALERROR EINVALIDINPUTERROR
| net-ipspace-assign | [top] |
Assign a list of interfaces to an ipspace. Modifies persistent config.
Input Name Range Type Description ipspace-config-info ipspace-config-info
Ipspace to create.
Errno Description EIPSPACEDOESNOTEXIST EINVALIDINPUTERROR EINTERNALERROR EINTERFACENOTFOUND
| net-ipspace-create | [top] |
Create a new ipspace. Modifies persistent config.
Input Name Range Type Description ipspace-config-info ipspace-config-info
Ipspace to create.
Errno Description EIPSPACEDOESNOTEXIST EINVALIDINPUTERROR EINTERNALERROR EINTERFACENOTFOUND
| net-ipspace-destroy | [top] |
Destroy an ipspace. Modifies persistent config.
Input Name Range Type Description ipspace-name string
IPSpace name.
Errno Description EIPSPACEDOESNOTEXIST EINVALIDINPUTERROR EINTERNALERROR
| net-ipspace-list | [top] |
List ipspaces.
Output Name Range Type Description ipspace-list ipspace-config-info[]
List of ipspaces.
| net-ping | [top] |
Ping a host. The API returns on the first successful ping of retry-count attempts. EHOSTNOTFOUND is returned if the host cannot be resolved. EONTAPI_EHOSTDOWN is returned if the host cannot be pinged. The interval between retries is 1 second. IPv6 is not supported at this time.
Input Name Range Type Description host-name-or-ip-address string
The name or the IP address of the host to ping. The format is an IPv4 host name or an IP address. retry-count integer
optional
The number of pings to try before giving up. Default is 3. Range: [1..5]
Errno Description EHOSTNOTFOUND
Vfiler-enabled Yes
| net-ping-info | [top] |
Ping a host. The API pings the host count times, and returns the number of successful pings and times. EHOSTNOTFOUND is returned if the host cannot be resolved. EHOSTNOCONTACT is returned if the host cannot be pinged. The interval between ping attempts is 1 second. IPv6 is not supported at this time.
Input Name Range Type Description host-name-or-ip-address string
The name or the IP address of the host to ping. The format is an IPv4 host name or IP address. ping-count integer
optional
The number of pings. Default is 3. Range: [1..16] Output Name Range Type Description packets-received integer
optional
The number of packets received. The number of packets lost is the packets-transmitted minus packets-received. Range: [0..16] packets-transmitted integer
optional
Number of packets transmitted. Should be equal to ping-count. Range: [1..16] round-trip-maximum-time integer
optional
Maximum time in microseconds for a round trip between the filer and the host if packets-recieved is greater than zero. Range: [0..2^31-1] round-trip-mean-time integer
optional
Mean time in microseconds for a round trip between the filer and the host if packets-recieved is greater than zero. Range: [0..2^31-1] round-trip-minimum-time integer
optional
Mimumum time in microseconds for a round trip between the filer and the host if packets-recieved is greater than zero. Range: [0..2^31-1]
Errno Description EHOSTNOTFOUND
Vfiler-enabled Yes
| net-resolve | [top] |
Resolves a host name to one or more IP addresses. Returns EHOSTNOTFOUND if the host name cannot be resolved. Does not support IPv6 at this time.
Input Name Range Type Description host-name string
Name of the host to resolved. Output Name Range Type Description ip-addresses ip-address[]
The IP addresses of the host.
Errno Description EHOSTNOTFOUND
Vfiler-enabled Yes
| net-route-add | [top] |
Create a new kernel route. Does not modify persistent config.
Input Name Range Type Description route-info route-info
Route to create.
Errno Description EROUTEEXISTS EINVALIDINPUTERROR EINVALIDROUTE
Vfiler-enabled Yes
| net-route-delete | [top] |
Delete a kernel route. Does not modify persistent config.
Input Name Range Type Description route-info route-info
Route to delete.
Errno Description EROUTENOTFOUND
Vfiler-enabled Yes
| net-vlan-create | [top] |
Create a new vlan interface. Does not modify persistent config.
Input Name Range Type Description vlan-info vlan-info
Vlan to create.
Errno Description EVLANEXISTS EINTERNALERROR EINVALIDINPUTERROR EINVALIDTAG EINTERFACENOTFOUND
| net-vlan-delete | [top] |
Delete a vlan interface. Does not modify persistent config.
Input Name Range Type Description vlan-info vlan-info
Vlan to delete.
Errno Description EINTERFACENOTFOUND
| Element definition: interface-config-info | [top] |
Configuration for one interface.
Name Range Type Description aliases ip-address-info[]
optional
List of interface IP aliases. Cannot include ipv4 addresses if v4-primary-address is empty, and cannot include ipv6 addresses if v6_primary-address is empty (except for autoconfigured ipv6 addresses). dad-attempts integer
optional
Number of IPv6 Duplicate Address Detection attempts for this interface. flowcontrol string
optional
Specifies the flow control type. Possible values: {none | receive | send | full} The meaning of these values is: "none" (no flow control), "receive" (only receive flow control frames), "send" (only send flow control frames), and "full" (send and receive flow control frames). If the flowcontrol option is not specified, the default value is interface-dependent. Fiber Interfaces: If the interface detects that the link partner auto-negotiates, then the operational flow control setting is negotiated (and the configured or default setting for flow control is ignored). Not all interfaces have a flowcontrol (e.g. loopback does not) Default is NIC-specific. interface-name string
Name of the interface. ipspace-name string
Name of ipspace that the interface belongs to. is-enabled boolean
optional
Administrative status. (true: interface is administratively up). Default is true. is-nfo-enabled boolean
optional
true: network failover is configured for this interface. Default is false; is-trusted boolean
optional
true: interface is trusted. Default is true. is-wins-enabled boolean
optional
true: interface is advertised to the WINS server. Default is true. mac-address string
optional
Interface mac address. Not provided for "lo" or "vh" interfaces. mediatype string
optional
Specifies the Ethernet media type used. Possible values: {tp | tp-fd | 100tx | 100tx-fd | 1000fx | 10g-sr | auto} 10/100, 100/1000, and 10/100/1000 Mbps Copper Interfaces: The acceptable types (which vary from card to card) are "tp" (Half-duplex 10BaseT RJ-45 twisted-pair), "tp-fd" (Full duplex 10Base-T RJ-45 twisted-pair), "100tx" (Half-duplex 100Base-T RJ-45 twisted-pair), "100tx-fd" (Full duplex 100Base-T RJ-45 twisted-pair), and "auto" (Auto RJ-45 twisted-pair). The default media type is set to "tp" or to "auto" where applicable. 1000 Mbps Fiber Interfaces: The Gigabit Ethernet Controllers only support the mediatype "auto". The Gigabit Ethernet Controllers only support full-duplex. 10G bps Fiber Interfaces: The 10G TOE/Ethernet Controllers support the mediatype "10g-sr" and "auto". The interface does not do auto-negotiatition, it only supports 10Gb speed, full duplex. Not all interfaces have a mediatype (e.g. loopback does not) mtusize integer
optional
Maximum Transfer Unit (MTU) of an interface. Range: 296-9196 Default is 1500. partner string
optional
Name of CFO partner interface that will failover to this interface. Default is no partner. v4-primary-address ip-address-info
optional
The primary ipv4 address for this interface If missing, it means the interface has no ipv4 addresses. v6-primary-address ip-address-info
optional
The primary ipv6 address for this interface If missing, it means the interface has no statically configured ipv6 addresses.
| Element definition: ip-address | [top] |
One ip address, in dotted-decimal format (for example, "192.168.11.12").
[none]
| Element definition: ipspace-config-info | [top] |
An IPSpace.
Name Range Type Description interface-list string[]
optional
List of interface names in the ipspace. An ipspace with no members is possible. ipspace-name string
IPSpace name.
| Element definition: net-config-info | [top] |
interface configurations and routes
Name Range Type Description config-status config-status-info[]
optional
status of net-config-info object, details of non-fatal errors Note: all the net zapis make a best effort and will return a successful result as long as they are partially successful. It is up to the client to inspect this status field and warn the user if problems were encountered. ifgrps ifgrp-info[]
optional
List of ifgrp interfaces. interfaces interface-config-info[]
List of interface configurations. routes route-info[]
optional
List of static routes. vlans vlan-info[]
optional
List of vlan interfaces.
| Element definition: route-info | [top] |
A kernel route.
Name Range Type Description addr-family string
Address family. Possible values: {af-inet6 | af-inet}. creator string
Entity responsible for creation of route. Possible values: "filer" if created by d-blade for default vfiler. "vfiler: " if created by d-blade for vfiler. "vserver: " if created by n-blade with cluster-wide scope. destination ip-address-or-hostname
Destination of route. Possible values: An IP address, hostname, or "default". ipspace-name string
IPSpace name. Must match the ipspace assigned to the creator. metric integer
optional
The route metric. Range: 0-10 next-hop ip-address
Next hop (router) IP address. prefixlen integer
optional
Prefix length (netmask) for destination. Range: 1..32 for af-inet and 1..128 for af-inet6. route-type string
optional
Possible values: "net" or "host".
| Element definition: vlan-info | [top] |
vlan
Name Range Type Description gvrp-enabled boolean
optional
true: GVRP is enabled. interface-name string
The interface name. parent-interface string
The interface that hosts the vlan interface. vlanid integer
The vlan id. Range: 1..4094.
| Element definition: config-status-info | [top] |
status of net-config-info object being returned used to return non-fatal errors encountered
Name Range Type Description operation string
Operation where error was encountered. status string
Error status of config object.
| Element definition: ifgrp-info | [top] |
ifgrp name, type, and components.
Name Range Type Description favored string
optional
interface that is favored. Only applies if ifgrp-type = single. ifgrp-policy string
optional
Possible values: [rr|mac|ip]. Default is ip. ifgrp-type string
Possible values: [single|multi|lacp]. interface-name string
The interface name. links link[]
optional
array of interface names in interface group. An ifgrp with no members is possible. nofavored string
optional
interface that is not favored. Only applies if ifgrp-type = single.
| Element definition: interface-config-info | [top] |
Configuration for one interface.
Name Range Type Description aliases ip-address-info[]
optional
List of interface IP aliases. Cannot include ipv4 addresses if v4-primary-address is empty, and cannot include ipv6 addresses if v6_primary-address is empty (except for autoconfigured ipv6 addresses). dad-attempts integer
optional
Number of IPv6 Duplicate Address Detection attempts for this interface. flowcontrol string
optional
Specifies the flow control type. Possible values: {none | receive | send | full} The meaning of these values is: "none" (no flow control), "receive" (only receive flow control frames), "send" (only send flow control frames), and "full" (send and receive flow control frames). If the flowcontrol option is not specified, the default value is interface-dependent. Fiber Interfaces: If the interface detects that the link partner auto-negotiates, then the operational flow control setting is negotiated (and the configured or default setting for flow control is ignored). Not all interfaces have a flowcontrol (e.g. loopback does not) Default is NIC-specific. interface-name string
Name of the interface. ipspace-name string
Name of ipspace that the interface belongs to. is-enabled boolean
optional
Administrative status. (true: interface is administratively up). Default is true. is-nfo-enabled boolean
optional
true: network failover is configured for this interface. Default is false; is-trusted boolean
optional
true: interface is trusted. Default is true. is-wins-enabled boolean
optional
true: interface is advertised to the WINS server. Default is true. mac-address string
optional
Interface mac address. Not provided for "lo" or "vh" interfaces. mediatype string
optional
Specifies the Ethernet media type used. Possible values: {tp | tp-fd | 100tx | 100tx-fd | 1000fx | 10g-sr | auto} 10/100, 100/1000, and 10/100/1000 Mbps Copper Interfaces: The acceptable types (which vary from card to card) are "tp" (Half-duplex 10BaseT RJ-45 twisted-pair), "tp-fd" (Full duplex 10Base-T RJ-45 twisted-pair), "100tx" (Half-duplex 100Base-T RJ-45 twisted-pair), "100tx-fd" (Full duplex 100Base-T RJ-45 twisted-pair), and "auto" (Auto RJ-45 twisted-pair). The default media type is set to "tp" or to "auto" where applicable. 1000 Mbps Fiber Interfaces: The Gigabit Ethernet Controllers only support the mediatype "auto". The Gigabit Ethernet Controllers only support full-duplex. 10G bps Fiber Interfaces: The 10G TOE/Ethernet Controllers support the mediatype "10g-sr" and "auto". The interface does not do auto-negotiatition, it only supports 10Gb speed, full duplex. Not all interfaces have a mediatype (e.g. loopback does not) mtusize integer
optional
Maximum Transfer Unit (MTU) of an interface. Range: 296-9196 Default is 1500. partner string
optional
Name of CFO partner interface that will failover to this interface. Default is no partner. v4-primary-address ip-address-info
optional
The primary ipv4 address for this interface If missing, it means the interface has no ipv4 addresses. v6-primary-address ip-address-info
optional
The primary ipv6 address for this interface If missing, it means the interface has no statically configured ipv6 addresses.
| Element definition: ip-address | [top] |
One ip address, in dotted-decimal format (for example, "192.168.11.12").
[none]
| Element definition: ip-address-info | [top] |
A configured IP Address
Name Range Type Description addr-family string
Address family. Possible values: {af-inet6 | af-inet}. address ip-address-or-hostname
IP address. broadcast ip-address
optional
broadcast address. Default if not specified is computed from IP address and netmask. Not used for IPV6. Must be consistent with netmask. creator string
Entity responsible for creation of address. "vfiler: " if created by d-blade for vfiler. "vserver: " if created by n-blade with cluster-wide scope. lif-type string
optional
type of LIF. Possible values are 7G, Data, Cluster, Mgmt, ClusMgmt, InterCluster netmask-or-prefix netmask-or-prefix
optional
netmask or prefix Default if not specified is autogenerated classful. no-ddns boolean
optional
true: the address is not advertised to ddns. Default if not specified is true.
| Element definition: ip-address-or-hostname | [top] |
IP address string. For example, 198.18.100.12, or "`hostname`-e0c" (backquoted hostname is allowed) or "toaster" (assuming toaster resolves to an IP address) or fd20:8b1e:b255:104:230:48ff:fe8c:6326
[none]
| Element definition: ip-address | [top] |
One ip address, in dotted-decimal format (for example, "192.168.11.12").
[none]
| Element definition: link | [top] |
ifgrp sub-interface name
[none]
| Element definition: netmask-or-prefix | [top] |
netmask. Possible values: dotted decimal or hex integer (range: 0x1 .. 0xffffffff) or '/' followed by hex integer (range: 0x1 .. 0x40) Default if not specified is classful: Class A address - 255.0.0.0 or 0xff000000 or /8 Class B address - 255.255.0.0 or 0xffff0000 or /16 Class C address - 255.255.255.0 or 0xffffff00 or /24 IPV6 address prefix - /1 through /128
[none]