WARNING: Please read through the instructions thoroughly before proceeding to update your unit. Failure to follow the instructions exactly MAY damage your unit and VOID your warranty.

1. Download the latest firmware for your device from here.
2. Connect the WxGoos unit with a CROSS-OVER CABLE to the computer that will be used for the update. Trying to update a WxGoos unit not directly attached to a computer MAY damage the unit and WILL VOID YOUR WARRANTY.
3. Change your Network Interface Card's (NIC) settings to the following:
   IP address '192.168.123.100'
   Subnet Mask '255.255.255.0'
   Gateway '192.168.123.1'
   
   You may restore the NIC's previous settings once the firmware update is complete.
4. If you have enabled the built-in Windows firewall or any third-party firewall, disable it before continuing.
5. Extract the zip file to an easy to find location (ie a folder on your desktop or at the root level of your hard disk)
6. Open the folder in Windows Explorer.
7. Double-click on the 'updater.exe' file and follow the on-screen instructions.
8. If everything works properly, the device should be available for use about two minutes after the update is complete.