#
#
#
installProgressLabelPrefix = Configuring
uninstallProgressLabelPrefix = Uninstalling 
Frame-Title-Text = {0} Version {1} Configuration Wizard
Uninstall-Frame-Title-Text = {0} Version {1} Unconfiguration Wizard
wb-ConsoleInteraction-HelpCommandLineOptionText = Options recognized by the Sun Java System Calendar Configure Wizard:\n\t-nodisplay     run configurator in text only (non graphical) mode\n\t-noconsole     don't display non graphical text. Used with\n\t               nodisplay option for silent installs.\n\t-novalidate    no text field validation checking \n\t-saveState [statefile] save state of configurator input\n\t-state [statefile] use the statefile for setting input values\n\n\t-debug         general debug info from Sun Java System Calendar Server Configure Wizard\n\t-debugMessage  output debugging information, includes errors and warnings\n\t-debugWarning  output warning message, includes errors\n\t-debugError    output error messages, on by default
wb-ConsoleInteraction-UnknownCommandLineOptionText=Unknown Option {0}

Progress-Reporter-Title-Text =  Please Wait
Installation-Progress-Message =  {0} Configuration Progress...
Exit-Message =  Are you sure you want to exit the wizard?<p>If so, click Exit. Otherwise click Continue to resume.
Cancel-Message =  Are you sure you want to cancel the current operation?
Message-Dismiss = OK
wb-Gui-OnlineHelpTitleText = {0} Configuration Online Help
wb-Gui-NoHelpAvailable = Sorry, no help is available for this subject.<p>Please report this problem to technical support at http://www.sun.com

#
#Button names so they can be localized/overridden on Setup SDK side
#
Back-Button = Back
Exit-Button = Cancel
Next-Button = Next
Help-Button = Help
Close-Button = Close
Exit-Dialog-Button = Exit
Exit-Dialog-Continue-Button = Continue

# Format log message
# {0} = DateTime stamp
# {1} = Panel name
# {2} = Error level (Information, Notice, Error, Critical Error) 
# {3} = Message
LogFormat-Message = [{0}] {1}: {2}: {3}

#
# Resources for com.sun.setup.panels.common.UserBlockPanel
#

userBlockPanel-install-Gui-OnlineHelp =  The configuration program is not able to properly run on this system because the user you are logged in as does not have full administration privileges for this system, such as the ability to administer services, update the registry, grant privileges, etc. <p>This problem must be resolved before the configuration can continue. You cannot continue with the configuration at this point you can only exit the configuration program.

userBlockPanel-Gui-HeaderText =  The configuration program cannot run on this system

userBlockPanel-Gui-IntroText = The configuration program has detected a problem that prevents the configuration from proceeding:  <p>The user you are logged in as does not have the required privileges to run the configuration program.<p>Please log out and log back in as a user that has full administration privileges for this system.<p>The configuration program cannot continue until this problem is corrected.

userBlockPanel-ConsoleInteraction = <p>The configuration program has detected a problem that prevents the configuration from proceeding: <p>The user you are logged in as does not have the required privileges to run the configuration program. <p>Please log out and log back in as a user that has full administration privileges for this system. <p> <Press Enter to Exit>

#
# Resources for com.sun.setup.panels.common.UserWarnPanel
#   This is for <panel name="userWarn">
#

userWarnPanel-Gui-OnlineHelp = You are running this Setup program as a non-root user. <p>As a non-root user, you do not have the permissions to store the information from this program in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>It is recommended that you exit now and run the program as a root user.

userWarnPanel-Gui-HeaderText =  Warning: Running as non-root user

userWarnPanel-Gui-IntroText =  WARNING: You are not logged on as root. Unless you are logged on as root, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>Exit Setup and login as root or click Next to continue.

userWarnPanel-ConsoleInteraction =  WARNING: You are not logged on as root. Unless you are logged on as root, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p> Press Enter.

userWarnPanel-Gui-OnlineHelpNT =  You are not running this Setup program as an administrator. <p>Ensure that you minimally have administrative privileges on this machine. Without administrative privileges, you do not have the permissions to store the information from this program in the system registry. <p>In order to facilitate future upgrades/uninstalls, exit the Setup program and run it as root.

userWarnPanel-Gui-HeaderTextNT =  Warning: Not running as administrator

userWarnPanel-Gui-IntroTextNT =  WARNING: You are not logged on as <b>administrator</b>. Unless you are logged on as <b>administrator</b> or another account with local administrative privileges, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p>Exit Setup and login as <b>administrator</b> or click Next to continue.

userWarnPanel-ConsoleInteractionNT =  WARNING: You are not logged on as <b>administrator</b>. Unless you are logged on as <b>administrator</b> or have local administrative privileges, information required to upgrade or uninstall this product will not be saved in the system registry. This will adversely affect future upgrades/reinstalls as well as the ability to perform a successful uninstallation. Manual cleanup after uninstallation may be required in certain cases. <p> Press Enter.

#
# Resources for com.sun.setup.panels.common.WelcomePanel
#

welcomePanel-install-Gui-IntroText =  Welcome to the {0} Configuration Program. We strongly recommend that you exit all programs before running this configuration. 

welcomePanel-uninstall-Gui-IntroText = Welcome to the {0} Uninstallation Program. We strongly recommend that you exit all programs before running this program.

welcomePanel-Gui-HeaderText =  Welcome 

welcomePanel-install-Gui-OnlineHelp = <font size=+1><b>Welcome</b></font><p>Welcome to the <b>{0}</b> Configuration Program. <p>This program displays a series of panels and asks you to provide Calendar Server configuration information.<p>At the bottom of each panel, the following navigation buttons allow you to move through the various configuration program panels: <ul><li><b>'Next'</b> takes you to the next panel.</li><li><b>'Back'</b> returns you to the previous panel.</li><li><b>'Exit'</b> ends the configuration program without configuring Calendar Server.</li><li><b>'Help'</b> displays help information about the current panel.</li><li><b>'OK'</b> exits an online help panel and returns you to the configuration program.</ul>

welcomePanel-uninstall-Gui-OnlineHelp = Welcome to the <b>{0}</b> uninstallation program. <p>This program asks you to supply configuration settings.<p>At the bottom of each panel, navigation buttons let you move through the uninstallation program: <ul> <li> <b>'Back'</b> returns you to the previous panel </li> <li> <b>'Next'</b> takes you to the next panel. </li> <li> <b>'Exit'</b> ends the uninstallation program without uninstalling the product.</li>  <li> <b>'Help'</b> displays help information about the panel currently displayed.</li> <li> <b>'OK'</b> exits the online help panel and returns you to the uninstallation program.</li> </ul>

welcomePanel-ConsoleInteraction = <p>You are running the configuration program for {0}. This program asks you to supply configuration preference settings that it uses to configure the server. <p>The configuration program consists of one or more selections that provide you with information and let you enter preferences that determine how {0} is configured. <P>When you are presented with the following question, the configuration process pauses to allow you to read the information that has been presented. When you are ready, press Enter to continue. <P> <Press ENTER to Continue>  <P>Some questions require more detailed information that you are required to type. The question may have a default value that is displayed inside of brackets []. For example, the following question has a default answer of yes: <P>   Are you sure? [yes] <P>If you want to accept the default answer, press only the Enter key (which on some keyboards is labeled Return). <P>If you want to provide a different answer, type it at the command prompt and then press Enter. <p>If yes is your answer, type 'yes' or 'y' at the command prompt and press Enter. If your answer is no, type 'no' or 'n' and press Enter.  <p>At any point in the configuration program, if you wish to exit the configuration program midway, press the '!' key and you will be given the option to exit or continue. <P> <Press ENTER to Continue> 

welcomePanel-ConsoleInteraction2 = <p>Welcome to the {0} Configuration Program <p>We strongly recommend that you exit all programs before running the configuration program. If you have other programs running, type Ctrl-C to end the configuration program and then close any other programs you have running. <p> <Press ENTER to Continue> 

#
# Resources for DataPathSelectionPanel
#
DataPathSelection-Gui-IntroText = Please specify the directory into which the {0} configuration and data files will be installed.
DataPathSelection-Gui-DirectorySelectionLabel = Directory to store {0} configuration and data files:
DataPathSelection-Gui-HeaderText = Directories to store configuration and data files
DataPathSelection-Gui-BrowseButton = Browse...
DataPathSelection-ConsoleInteraction = Please specify the directory into which the {0} data files will be installed.
DataPathSelection-ConsoleInteraction-DirectorySelectionQuestion = Directory to install {0} data files: 
DataPathSelection-install-Gui-OnlineHelp = <font size=+1><b>Database, Logs, and Temporary Files Directories Options</b></font><p><b>Database Directory</b> is the directory where Calendar Server creates the calendar database files.<p><b>Logs Directory</b> is the directory where Calendar Server writes log files.<p><b>Temporary Files Directory</b> is the directory where Calendar Server writes temporary files.<p>For each directory, you can accept the default directory, type the full path of another directory, or click <b>Browse...</b> and choose a directory.<p><b>Note</b> It is recommended that you accept the default directories indicated by the configuration program.

DataPathSelection-Gui-DirBrowser-Title = Select destination directory

DataPathSelection-Gui-configPath-Label = Config Directory:
DataPathSelection-Gui-dbPath-Label = Database Directory:
DataPathSelection-Gui-logsPath-Label =  Logs Directory:
DataPathSelection-Gui-tmpPath-Label = Temporary Files Directory:

DataPathSelection-QandA1-Title = Problem creating directory
DataPathSelection-QandA1-Message = The directory provided is empty, please provide a valid directory
DataPathSelection-QandA1-OkButton = OK

DataPathSelection-QandA2-Title = Problem creating directory
DataPathSelection-QandA2-Message = <b>Cannot create a new directory \{0}\"</b><p>You must choose another directory to use.
DataPathSelection-QandA2-AcceptButton = OK

DataPathSelection-QandA3-Title = Create new directory?
DataPathSelection-QandA3-Message = <b>The directory \{0}\" does not exist.</b><p>Do you want to create it now or choose another directory?
DataPathSelection-QandA3-CreateDirectoryButton = Create Directory
DataPathSelection-QandA3-ChooseNewButton = Choose New

DataPathSelection-QandA4-Title = Non empty directory
DataPathSelection-QandA4-Message = The directory {0} is not empty, data may be overwritten.
DataPathSelection-QandA4-ChooseNewButton = Choose New
DataPathSelection-QandA4-AcceptButton = Accept Anyway

DataPathSelection-QandA5-Title = Installation Directory and this directory can not be the same directory
DataPathSelection-QandA5-Message = This directory {0} can not be the same directory as the installation directory {1}. You should separate the binaries from the configuration and data files. Soft links will be created from the installation directory to the directory containing the configuration and data files.
DataPathSelection-QandA5-ChooseNewButton = Choose New

#
# Resources for com.sun.setup.panels.common.VerifyPanel
#

verifyPanel-install-Gui-OnlineHelp = <font size=+1><b>Ready to Configure</b></font><p>The configuration program is ready to configure Calendar Server with the components listed below based on your configuration selections.<p>If you are satisfied with your selections, click <b>Configure Now</b> to begin the configuration. <p>To return to previous panels to modify your selections, click <b>Back</b>.
      
verifyPanel-install-now = Configure Now
      
verifyPanel-checking_disk_space = Checking disk space...

verifyPanel-not_enough_space = WARNING: {0} partition has insufficient space to  install the items selected.  {1} MB additional space would be needed to install selected items.
      
verifyPanel-install-ready = Ready to Configure

verifyPanel-not_enough_partition_space WARNING: Insufficient disk partition space to install the items selected.

verifyPanel-close = Close
      
verifyPanel-start_over = Start Over
      
verifyPanel-install-exit = Exit Configure Program
      
verifyPanel-what_to_do = What would you like to do?
      
verifyPanel-install-cannot = Configuration cannot start!

verifyPanel-install-items = The following items for the product {0} will be configured: 

verifyPanel-product = Product

verifyPanel-location = Location

verifyPanel-total_string = Total

verifyPanel-install-size = Space Required

verifyPanel-uninstall-size = Space Reclaimed

verifyPanel-uninstall-Gui-OnlineHelp = The listed components are ready for uninstallation based on your configuration settings. <p>If you satisfied with your selection, click Uninstall Now to begin. <p>To return to your previous panels so you can modify your selections, click the Back button.

verifyPanel-uninstall-now = Unconfigure Now
      
verifyPanel-uninstall-ready = Ready to Unconfigure
      
verifyPanel-uninstall-exit = Exit Unconfigure Program

verifyPanel-uninstall-cannot = Uninstallation cannot start!

verifyPanel-uninstall-items = The following items for the product {0} will be unconfigured:


# 
# Resources for com.sun.setup.panels.common.ProgressPanel
#

progressPanel-install-Progress-Header = Configuring... 

progressPanel-uninstall-Progress-Header = Uninstalling... 

progressPanel-install-Gui-OnlineHelp = This panel indicates the progress of the configuration with the aid of the progress bar. To pause or abort configuration, press the Stop button. 

progressPanel-uninstall-Gui-OnlineHelp = This panel indicates the progress of the uninstallation with the aid of the progress bar. To pause or abort uninstallation, press the Stop button. 

#
# Resources for com.sun.setup.panels.common.SummaryPanel
#


summaryPanel-uninstall-Summary = Uninstallation Summary

summaryPanel-install-Summary = Configuration Summary

summaryPanel-install-Summary-Below = The {0} configuration status is shown below:

summaryPanel-uninstall-Summary-Below = The {0} uninstallation status is shown below:

summaryPanel-Product = Product

summaryPanel-Status = Status

summaryPanel-Information = Information

summaryPanel-More-Information = More Information 

summaryPanel-See-Log-File = Click on the \"Details...\" Button beside product status for more information.

summaryPanel-Click-Exit = Click on the \"Close\" Button to quit.

summaryPanel-Log-File-Location-Notice = Log File: {0}

summaryPanel-Installed = Configured

summaryPanel-Partially-Installed = Partially Installed

summaryPanel-Full = Full

summaryPanel-Partial = Partial

summaryPanel-Failed = Failed

summaryPanel-Stopped = Stopped By User 

summaryPanel-Not-Installed = Not Configured

summaryPanel-Attempted-To-Remove-Stopped = The configuration program has attempted to remove the product whose configuration has Failed or has been Stopped by User.

summaryPanel-Attempted-To-Remove-Failed = The installation has attempted to remove the product whose installation has Failed.

summaryPanel-Details = Details...

summaryPanel-install-Gui-OnlineHelp = <b>Configuration Summary</b><p>The configuration program lists the status. Click <b>Details...</b> to view the configuration log. 

summaryPanel-uninstall-Gui-OnlineHelp = The status of the unconfiguration is listed. Click on the Details button to view the log. 

summaryPanel-uninstall-cli-summary-desc = Unconfiguration Details:

summaryPanel-install-cli-summary-desc = Configuration Details:

summaryPanel-cli-summary-prompt = Enter the number corresponding to the desired selection for more information, or enter {0} to continue:

summaryPanel-cli-summary-name = Product 

summaryPanel-cli-summary-result = Result

summaryPanel-cli-summary-more = More Information

summaryPanel-cli-summary-notavailable = Not Available

summaryPanel-cli-summary-available = Available 

summaryPanel-cli-summary-done = {0}. Done

summaryPanel-cli-summary-error = No More Information Available

summaryPanel-cli-summary-enter = <Press Return to continue viewing this log file or 'q' to finish viewing> 

#
# resources for LoadDefaults panel - a  LoadWizardStateDefaults class
#
LoadDefaults-StartLogfile = Log file created

LoadDefaults-Starting = Loading Default Properties...
LoadDefaults-Finished = Finished loading Default Properties.

LoadDefaults-noFQDN-Title = ERROR: Hostname is not a fully qualified domain name
LoadDefaults-noFQDN-Message = Hostname {0} for this machine is not a fully qualified domain name. Please correct this before attempting to configure Calendar Server. Perhaps DNS is not setup properly?
LoadDefaults-noFQDN-ExitButton = Exit

LoadDefaults-noHOST-Title = ERROR: No Hostname found for this machine.
LoadDefaults-noHOST-Message = Could not get a hostname for the system. Please correct this before attempting to configure Calendar Server.
LoadDefaults-noHost-ExitButton = Exit
#
#
#
filePermissions-Gui-HeaderText = filePermissions TBD
NTreg-Gui-HeaderText = NTreg TBD
imtaConfig-Gui-HeaderText = imtaConfig TBD
adminStart-Gui-HeaderText = adminStart TBD
templateReplace-Gui-HeaderText = templateReplace TBD
consoleStart-Gui-HeaderText = consoleStart TBD

LoadDefaults-install-Gui-OnlineHelp= LoadDefaults Help TBD
CSUserGroupGui-OnlineHelp = CSUserGroupGui Help TBD
hostDomainPanel-install-Gui-OnlineHelp = hostDomain Help TBD
PostmasterPanel-install-Gui-OnlineHelp = Postmaster Help TBD
imsPassword-install-Gui-OnlineHelp = imsPassword Help TBD
TranslateDefaults-install-Gui-OnlineHelp = TranslateDefaults Help TBD
filePermissions-install-Gui-OnlineHelp = filePermissions Help TBD
ldapChanges-install-Gui-OnlineHelp = ldapChanges Help TBD
NTreg-install-Gui-OnlineHelp = NT registry Help TBD
imtaConfig-install-Gui-OnlineHelp = imtaConfig Help TBD
adminStart-install-Gui-OnlineHelp = admin server start Help TBD
templateReplace-install-Gui-OnlineHelp = templateReplace Help TBD
consoleStart-install-Gui-OnlineHelp = Start Console Help TBD

#
#
#
adminPort-install-Gui-OnlineHelp = adminPort-install-Gui-OnlineHelp
adminPort-ConsoleInteraction = adminPort-ConsoleInteraction
adminPort-ConsoleInteraction2 = adminPort-ConsoleInteraction2
portCheck-install-Gui-OnlineHelp = portCheck-install-Gui-OnlineHelp
portCheck-ConsoleInteraction = portCheck-ConsoleInteraction
portCheck-ConsoleInteraction2 = portCheck-ConsoleInteraction2

#
# lastPanel - a LastPanel
# this is not visible to the user
#
lastPanel-install-Gui-OnlineHelp = No help available

#
WriteDevsetupProps-install-Gui-OnlineHelp = TBD

WriteDevsetupProps-ProgressMsg-Configuration = The Configurator is applying the new settings to the Sun Java System Calendar Server

# screen that pops up when it fails to write Devsetup.properties 
#   or mid_dctree.ldif
WriteDevsetupProps-QandA-Title = I/O Error 
WriteDevsetupProps-QandA-Message = I/O error while trying to write {0}.\n{1}
WriteDevsetupProps-QandA-Dismiss = Exit

#
DevsetupPanel-install-Gui-OnlineHelp = TBD

# header text when sequence is started
DevsetupPanel-Gui-HeaderText-Started = Starting Task Sequence
# message when sequence is started
DevsetupPanel-Started = Starting Task Sequence

# header text when sequence completes
DevsetupPanel-Gui-HeaderText-Completed = Sequence Completed
# message when sequence has completed
DevsetupPanel-Completed = Sequence Completed\n

# message for each task, one for failure, and one for success
# 3args: task name, status, and logfile
DevsetupPanel-FAILED = FAILED: {0} : status = {1}\n
DevsetupPanel-PASSED = PASSED: {0} : status = {1}\n
# message at the very end of the panel
# 1 arg: logfile
DevsetupPanel-PASSED-FINISHED = \nAll Tasks Passed. Please check install log {0} for further details. \n\n Hit NEXT to continue
DevsetupPanel-FAILED-FINISHED = \nFAILURE: Number of task failed:{1}. Please check install log \n     {0}\nfor further details. \n\n Hit NEXT to continue

#
# AdminAndAuthDirPanel
#
AdminAndAuthDirPanel-install-Gui-OnlineHelp = <font size=+1><b>Administration, User Preferences and Authentication Options</b></font><p><b>Note</b> Before you can configure Calendar Server, you must run the Directory Server Setup (comm_dssetup.pl) script to configure Sun Java System Directory Server 5.x. If you have not run comm_dssetup.pl, click Cancel to exit and then run the script.<p><b>User Preferences Directory</b><p>Sun Java System Calendar Server requires a directory server 5.x or above for user authentication and for the storage and retrieval of user preferences. Please provide the following information about the directory server you plan to use:<p><b>Host</b> is the host name of the LDAP directory server.<p><b>Port</b> is the TCP port number that the LDAP directory server listens on.<p><b>Base DN</b> is the Distinguished Name (DN) used as the entry in the LDAP directory server from which searches will occur. For example, if you specify a Base DN of <tt>ou=people, o=airius.com</tt>, the search operation will examine only the <tt>ou=people</tt> subtree in the <tt>o=airius.com</tt> directory tree.<p>Before you click Get Base DN, you must enter the Directory Manager DN and password to authenticate to the directory server.<p> <b>Calendar Server Administrator</b><p>The Calendar Server Administrator is the user account that will manage Calendar Server. Please provide the following information:<p><b>Administrator User ID</b> is the user ID of the Calendar Server Administrator. The default is <tt>calmaster</tt>.  <p><b>Administrator Password</b> is the password of the Calendar Server Administrator. <p><b>Note</b> Calendar Server will <b>not</b> run successfully unless an LDAP directory server is available and the Calendar Server Administrator exists in that LDAP directory server. If the user ID you specify for the Calendar Server Administrator does not exist in the above LDAP directory server, the configuration program will give you the option of creating the user in that directory server.


AdminAndAuthDirPanel-Gui-HeaderText = Administration, User Preferences and Authentication
AdminAndAuthDirPanel-Gui-DirectoryHeaderText = User Preferences Directory

AdminAndAuthDirPanel-Gui-DirectoryServerHostnameLabel = LDAP Server Host Name:
AdminAndAuthDirPanel-Gui-DirectoryServerPortLabel = LDAP Server Port:
AdminAndAuthDirPanel-Gui-BaseDNLabel = Base DN:
AdminAndAuthDirPanel-Gui-BaseDNButton = Get
AdminAndAuthDirPanel-Gui-DirectoryManagerDNLabel: Directory Manager DN:
AdminAndAuthDirPanel-Gui-DirectoryManagerPasswordLabel = Directory Manager Password:

AdminAndAuthDirPanel-Gui-CalmasterHeaderText = Calendar Server Administrator
AdminAndAuthDirPanel-Gui-CalmasterUserIdLabel = Administrator User ID
AdminAndAuthDirPanel-Gui-CalmasterPasswordLabel = Administrator Password:

AdminAndAuthDirPanel-ProgressMsg-VerifyingLDAPHostAndCredentials = The configuration program is verifying that the LDAP Server is reachable and that Directory Manager credentials are valid
AdminAndAuthDirPanel-ProgressMsg-VerifyingServerAdmin = The configuration program is verifying the credentials for the Server Administrator
AdminAndAuthDirPanel-ProgressMsg-GetBaseDN = Getting the baseDN from the LDAP server

#Message raised when LDAP test failed
AdminAndAuthDirPanel-ldap-baseDN-warning = Could not connect to LDAP server with baseDN {0}. Error code {1}. {2}
AdminAndAuthDirPanel-QandA1-Title = Error
AdminAndAuthDirPanel-QandA1-ChooseNewButton = Choose New

AdminAndAuthDirPanel-ConsoleInteraction-IntroText = Please specify the Configuration Directory (LDAP) server. The Ldap Server URL\nis an url link to the directory server on which the console\ncomponent is configured. The url should  be in the format of\nldap://<hostname>:<port>. e.g. \n\nldap://ldapserver.mycompany.com:390.\n\nThe default bind DN is the distinguished name for the directory manager. The URL is read in from the Administration Server configuration. This should normally be the correct value, and should be left alone. Also note that you should point the URL at the master Directory Server and not a replica, as you normally would not be able to write to the replica.

AdminAndAuthDirPanel-Gui-noURL-warning = Please specify the directory server url.
AdminAndAuthDirPanel-Gui-invalidLdapURL-warning = Invalid directory server url.
AdminAndAuthDirPanel-Gui-noDN-warning = You must enter a bind DN. Please try again.
AdminAndAuthDirPanel-password-warning = You must enter a password. Please try again.
AdminAndAuthDirPanel-ldap-credentials-warning = Could not connect to LDAP server. Error code {0}. {1}
AdminAndAuthDirPanel-ldap-baseDN-warning = Could not connect to LDAP server with baseDN {0}. Error code {1}. {2}
AdminAndAuthDirPanel-Gui-OnlineHelp = Use this window to specify the LDAP configuration for user authentication, to enable email alarm notifications and SMTP configuration to the Calendar Server.<p>This LDAP server will be used for user authentication only. You must provide answers to all of the information requested.<p><b>Host:</b> the host name the machine on which the LDAP server is running.<p><b>Port:</b> the TCP port number that the LDAP server listens to.<p><b>Base DN:</b> Distinguished name (DN) used as the entry in your LDAP directory from which searches will occur. For example, if you specify a base DN of ou=people, o=airius.com, then the search operation will examine only the ou=people subtree in the o=airius.com directory tree.<p><p>Enter the full email address of the administrator for this Calendar Server, the name of the system running an SMTP server for this Calendar Server to use when sending email, and if you want to enable this Calendar Server to send email alarms when triggered.

AdminAndAuthDirPanel-ConsoleInteraction-IntroText = Please specify the User/Group Directory (LDAP) server. The Ldap Server URL is\nan url link to the directory server on which the users and groups information is stored. The url should  be in the format of\n\nldap://<hostname>:<port>. e.g. \n\nldap://ldapserver.mycompany.com:389.\n\nThe default bind DN is the distinguished name for the directory manager. The URL is read in from the Configuration Directory Server. This should normally be the correct value, and should be left alone. Moreover, the URL should not specify a replica as normally you will not be able to write to it.
AdminAndAuthDirPanel-ConsoleInteraction-iDSurl = User/Group Server LdapURL:
AdminAndAuthDirPanel-ConsoleInteraction-BindingDN = Bind As:
AdminAndAuthDirPanel-ConsoleInteraction-Password = Password:

# String to use for version/revision when none was found
AdminAndAuthDirPanel-NOVERSION = NONE DETECTED
AdminAndAuthDirPanel-NOREVISION = 0

AdminAndAuthDirPanel-QandA1-Title = Error
AdminAndAuthDirPanel-QandA1-Message = The LDAP Server Host Name is empty, please enter a valid Host Name
AdminAndAuthDirPanel-QandA1-OkButton = Ok

AdminAndAuthDirPanel-QandA2-Title = Error
AdminAndAuthDirPanel-QandA2-Message = The LDAP Server Port number is empty, please enter a valid port number
AdminAndAuthDirPanel-QandA2-OkButton = Ok

AdminAndAuthDirPanel-QandA3-Title = Error
AdminAndAuthDirPanel-QandA3-Message = The LDAP Server Port provided is incorect or not a number, please enter a valid port number
AdminAndAuthDirPanel-QandA3-OkButton = Ok

AdminAndAuthDirPanel-QandA4-Title = Error
AdminAndAuthDirPanel-QandA4-Message = The Base DN is empty, please enter a valid Base DN
AdminAndAuthDirPanel-QandA4-OkButton = Ok

AdminAndAuthDirPanel-QandA5-Title = Error
AdminAndAuthDirPanel-QandA5-Message = The Directory Manager DN is empty, please enter a valid Directory Manager DN
AdminAndAuthDirPanel-QandA5-OkButton = Ok

AdminAndAuthDirPanel-QandA6-Title = Error
AdminAndAuthDirPanel-QandA6-Message = The Directory Manager password is empty, please enter a valid password
AdminAndAuthDirPanel-QandA6-OkButton = Ok

AdminAndAuthDirPanel-QandA7-Title = Error
AdminAndAuthDirPanel-ldap-error = Could not connect to LDAP server. Error code {0}. {1}
AdminAndAuthDirPanel-QandA7-ChooseNewButton = Change

AdminAndAuthDirPanel-QandA8-Title   = Question
AdminAndAuthDirPanel-QandA8-Message = User {0} could not be found on LDAP server {1}.
AdminAndAuthDirPanel-QandA8-Create    = Create it
AdminAndAuthDirPanel-QandA8-ChooseNew = Choose New

AdminAndAuthDirPanel-QandA9-Title    = Error
AdminAndAuthDirPanel-QandA9-Message  = Could not authenticate user {0} on LDAP server {1}. Error code: {2}. {3}
AdminAndAuthDirPanel-QandA9-OkButton = Ok

AdminAndAuthDirPanel-QandA10-Title    = Error
AdminAndAuthDirPanel-QandA10-Message  = Could not get the Base DN on LDAP server {0}. 
AdminAndAuthDirPanel-QandA10-OkButton = Ok

AdminAndAuthDirPanel-QandA11-Title    = Question
AdminAndAuthDirPanel-QandA11-Message  = The base DN specified: {0} does not exist. Do you want the configurator to create it?
AdminAndAuthDirPanel-QandA11-CreateButton    = Create
AdminAndAuthDirPanel-QandA11-ChooseNewButton = Choose New

AdminAndAuthDirPanel-QandA12-Title = Error
AdminAndAuthDirPanel-QandA12-Message = The Calendar Administrator UserId is empty, please enter a valid User ID
AdminAndAuthDirPanel-QandA12-OkButton = Ok

AdminAndAuthDirPanel-QandA13-Title = Error
AdminAndAuthDirPanel-QandA13-Message = The Calendar Administrator Password is empty, please enter a valid password
AdminAndAuthDirPanel-QandA13-OkButton = Ok

AdminAndAuthDirPanel-QandA14-Title = Error
AdminAndAuthDirPanel-QandA14-Message = A critical error occured when trying to validate the root suffix in the base DN provided
AdminAndAuthDirPanel-QandA14-OkButton = Ok

AdminAndAuthDirPanel-QandA15-Title = Error
AdminAndAuthDirPanel-QandA15-Message = No valid root suffix could be found in the provided base DN.<p>Please enter an existing root suffix or create one by running comm_dssetup.pl on the Directory Server.
AdminAndAuthDirPanel-QandA15-OkButton = Ok

AdminAndAuthDirPanel-QandA16-Title    = Warning
AdminAndAuthDirPanel-QandA16-Message  = The base DN specified is equal to the root suffix, what do you want to do?
AdminAndAuthDirPanel-QandA16-ContinueButton  = Continue
AdminAndAuthDirPanel-QandA16-ChooseNewButton = Choose New

AdminAndAuthDirPanel-QandA17-Title    = Warning
AdminAndAuthDirPanel-QandA17-Message  = The base DN specified is not inherited from the root suffix created by comm_dssetup.pl: [{0}], what do you want to do?
AdminAndAuthDirPanel-QandA17-ContinueButton  = Continue
AdminAndAuthDirPanel-QandA17-ChooseNewButton = Choose New



#
# UgDirPanel
#
UgDirPanel-install-Gui-OnlineHelp = Use this window to specify the LDAP configuration Calendar Server uses to store user preferences.<p>This LDAP server will be used for user authentication only. You must provide answers to all of the information requested.<p><b>Host:</b> the host name the machine on which the LDAP server is running.<p><b>Port:</b> the TCP port number that the LDAP server listens to.<p><b>Base DN:</b> the distinguished name (DN) used as the entry in your LDAP directory from which searches will occur. For example, if you specify a base DN of ou=people, o=airius.com, then the search operation will examine only the ou=people subtree in the o=airius.com directory tree.<p><b>Administrator Bind DN:</b> the DN of the account that has privileges to manage the attributes of any calendar user in the LDAP directory that stores user preferences.<p><p>The default is:<p><tt>uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot</tt><p>The default DN suggested by the installation program will work with any 4.x version of Netscape/iPlanet LDAP Directory Server. You can verify this DN by using the directory server <tt>ldapsearch</tt> utility, for example:<p><tt>./ldapsearch -b o=NetscapeRoot uid=admin</tt><p><b>Administrator Password:</b> the password for the LDAP server administrator account specified as the Administrator Bind DN.
UgDirPanel-Gui-HeaderText = User Preferences 

UgDirPanel-Gui-DirectoryServerHostnameLabel = LDAP Server Host Name:
UgDirPanel-Gui-DirectoryServerPortLabel = LDAP Server Port:
UgDirPanel-Gui-BaseDNLabel = Base DN:
UgDirPanel-Gui-DirectoryManagerDNLabel: Directory Manager DN:
UgDirPanel-Gui-DirectoryManagerPasswordLabel = Directory Manager Password:

UgDirPanel-Gui-CalmasterHeaderText = Calendar Server Administrator
UgDirPanel-Gui-CalmasterUserIdLabel = Administrator User ID
UgDirPanel-Gui-CalmasterPasswordLabel = Administrator Password:

UgDirPanel-ProgressMsg-VerifyingLDAPHostAndCredentials = The configuration program is verifying that the LDAP Server is reachable and that Directory Manager credentials are valid

#Message raised when LDAP test failed
UgDirPanel-ldap-baseDN-warning = Could not connect to LDAP server with baseDN {0}. Error code {1}. {2}
UgDirPanel-QandA1-Title = Error
UgDirPanel-QandA1-ChooseNewButton = Choose New

UgDirPanel-ConsoleInteraction-IntroText = Please specify the Configuration Directory (LDAP) server. The Ldap Server URL\nis an url link to the directory server on which the console\ncomponent is configured. The url should  be in the format of\nldap://<hostname>:<port>. e.g. \n\nldap://ldapserver.mycompany.com:390.\n\nThe default bind DN is the distinguished name for the directory manager. The URL is read in from the Administration Server configuration. This should normally be the correct value, and should be left alone. Also note that you should point the URL at the master Directory Server and not a replica, as you normally would not be able to write to the replica.

UgDirPanel-Gui-noURL-warning = Please specify the directory server url.
UgDirPanel-Gui-invalidLdapURL-warning = Invalid directory server url.
UgDirPanel-Gui-noDN-warning = You must enter a bind DN. Please try again.
UgDirPanel-password-warning = You must enter a password. Please try again.
UgDirPanel-ldap-credentials-warning = Could not connect to LDAP server. Error code {0}. {1}
UgDirPanel-ldap-baseDN-warning = Could not connect to LDAP server with baseDN {0}. Error code {1}. {2}

UgDirPanel-ConsoleInteraction-IntroText = Please specify the User/Group Directory (LDAP) server. The Ldap Server URL is\nan url link to the directory server on which the users and groups information is stored. The url should  be in the format of\nldap://<hostname>:<port>. e.g. \n\nldap://ldapserver.mycompany.com:389.\n\nThe default bind DN is the distinguished name for the directory manager. The URL is read in from the Configuration Directory Server. This should normally be the correct value, and should be left alone. Moreover, the URL should not specify a replica as normally you will not be able to write to it.
UgDirPanel-ConsoleInteraction-iDSurl = User/Group Server LdapURL:
UgDirPanel-ConsoleInteraction-BindingDN = Bind As:
UgDirPanel-ConsoleInteraction-Password = Password:

# String to use for version/revision when none was found
UgDirPanel-NOVERSION = NONE DETECTED
UgDirPanel-NOREVISION = 0

UgDirPanel-QandA1-Title = Error
UgDirPanel-QandA1-Message = The LDAP Server Host Name is empty, please enter a valid Host Name
UgDirPanel-QandA1-OkButton = Ok

UgDirPanel-QandA2-Title = Error
UgDirPanel-QandA2-Message = The LDAP Server Port number is empty, please enter a valid port number
UgDirPanel-QandA2-OkButton = Ok

UgDirPanel-QandA3-Title = Error
UgDirPanel-QandA3-Message = The LDAP Server Port provided is incorect or not a number, please enter a valid port number
UgDirPanel-QandA3-OkButton = Ok

UgDirPanel-QandA4-Title = Error
UgDirPanel-QandA4-Message = The Base DN is empty, please enter a valid Base DN
UgDirPanel-QandA4-OkButton = Ok

UgDirPanel-QandA5-Title = Error
UgDirPanel-QandA5-Message = The Directory Manager DN is empty, please enter a valid Directory Manager DN
UgDirPanel-QandA5-OkButton = Ok

UgDirPanel-QandA5-Title = Error
UgDirPanel-QandA5-Message = The Directory Manager password is empty, please enter a valid password
UgDirPanel-QandA5-OkButton = Ok

UgDirPanel-QandA7-Title = Error
UgDirPanel-ldap-error = Could not connect to LDAP server. Error code {0}. {1}
UgDirPanel-QandA7-ChooseNewButton = Change



#
#EmailAlarmsPanel
#
EmailAlarmsPanel-Gui-HeaderText = Email and Email Alarms
EmailAlarmsPanel-Gui-enableAlarmsLabel = Email Alarms:
EmailAlarmsPanel-Gui-enableAlarmsRadioLabel = Enabled
EmailAlarmsPanel-Gui-disableAlarmsRadioLabel = Disabled
EmailAlarmsPanel-Gui-AdminEmailLabel = Administrator Email Address:
EmailAlarmsPanel-Gui-SMTPHostnameLabel = SMTP Host Name
EmailAlarmsPanel-ProgressMsg-VerifyingSmtpHost = The configuration program is verifying that the SMTP Server system is reachable on the network
EmailAlarmsPanel-ProgressMsg-VerifyingLDAPHostAndCredentials = The configuration program is verifying that the LDAP Server is reachable and that the credentials are valid

EmailAlarmsPanel-ProgressMsg-VerifyingLDAPHostAndCredentials = The configuration program is verifying that the LDAP Server is reachable and that the credentials are valid

EmailAlarmsPanel-install-Gui-OnlineHelp = <font size=+1><b>Email and Email Alarms Options</b></font><p>You can configure Calendar Server to send email alarm messages to a Calendar Server Administrator in case server problems occur.<p><b>Email Alarms</b> enables or disables this option.<p><b>Administrator Email Address</b> is the email address of the Calendar Server Administrator who will receive the alarm messages. <p><b>SMTP Server Host Name</b> is the host name of the SMTP server where Calendar Server sends the email alarm messages. <p><b>Note</b> An email message sent from a calendar owned by a user who does not have an email address also uses this email address as the default sender (that is, in the <i>From:</i> header in the message).

# screen that pops up when ...
EmailAlarmsPanel-QandA-Title = Postmaster address is required
EmailAlarmsPanel-QandA-Message = You must enter an email address
EmailAlarmsPanel-QandA-Dismiss = OK

# screen that pops up when string is null
EmailAlarmsPanel-QandA1-Title = no email address entered
EmailAlarmsPanel-QandA1-Message = Please enter an Email address
EmailAlarmsPanel-QandA1-OkButton = Retry

# screen that pops up when no @ found in email address
EmailAlarmsPanel-QandA2-Title = no @ found in Postmaster email address
EmailAlarmsPanel-QandA2-Message = Email address must have an @ in it.
EmailAlarmsPanel-QandA2-OkButton = Retry

# screen that pops up when @ is final character
EmailAlarmsPanel-QandA3-Title = no domain found in email address.
EmailAlarmsPanel-QandA3-Message = Email address can not end with @
EmailAlarmsPanel-QandA3-OkButton = Retry

# screen that pops up when @ is first character
EmailAlarmsPanel-QandA4-Title = no user found in email address
EmailAlarmsPanel-QandA4-Message = Email address can not start with @
EmailAlarmsPanel-QandA4-OkButton = Retry

# screen that pops up when no . is found after the @ character
EmailAlarmsPanel-QandA5-Title = Fully Qualified Domain Required
EmailAlarmsPanel-QandA5-Message = Domain must be fully qualified, no "." was found in domain portion of the address.
EmailAlarmsPanel-QandA5-OkButton = Retry

# screen that pops up when address ends with a dot
EmailAlarmsPanel-QandA6-Title = Domain can not end with "."
EmailAlarmsPanel-QandA6-Message = Domain can not end with "."
EmailAlarmsPanel-QandA6-OkButton = Retry

# screen that pops up when domain starts with a dot
EmailAlarmsPanel-QandA7-Title = Domain can not start with "."
EmailAlarmsPanel-QandA7-Message = Domain can not start with "."
EmailAlarmsPanel-QandA7-OkButton = Retry

#screen that pops up when SMTP server is not valid
EmailAlarmsPanel-QandA3-Title = Problem connecting to Smtp Host
EmailAlarmsPanel-QandA3-Message = Unable to contact an Smtp server on the specified Smtp Host (<b>{0}</b>).<p>Please enter the host name of the system running an SMTP server for this Calendar Server to use when sending email.<p><b>Note:</b> The Calendar server will <b>not</b> run successfully unless an SMTP server is available.<p>Are you sure you want to use this host for SMTP connections?
EmailAlarmsPanel-QandA3-AcceptButton = Accept
EmailAlarmsPanel-QandA3-ChooseNewButton = Choose New

#
# RuntimeSetupPanel 
#
RuntimeSetupPanel-install-Gui-OnlineHelp = <font size=+1><b>Runtime Configuration Options</b></font><p>You can configure the following Calendar Server runtime options:<p><b>Service Port</b> is the TCP port number that Calendar Server listens on to provide web (HTTP) access to users. <p><b>Maximum Sessions</b> is the maximum number of concurrent Calendar Server sessions.<p><b>Maximum Threads</b> is the maximum number of concurrent Calendar Server threads.<p><b>Number of Server Processes</b> is the number of Calendar Server processes to run on the server. The default is the number of CPUs on the server where you are installing Calendar Server.<p><b>Runtime User ID</b> is the UNIX user name under which Calendar Server will run. This user name should <b>not</b> be <tt>root</tt>. If this user account does not exist, the configuration program will create it. The default is <tt>icsuser</tt>.<p><b>Runtime Group ID</b> is the UNIX group under which Calendar Server will run. If this group does not exist, the configuration program will create it. The default is <tt>icsgroup</tt>. <p><b>Note</b> It is recommended that you accept the default values for Runtime User ID and Runtime Group ID (<tt>icsuser</tt> and <tt>icsgroup</tt>).<p><b>Calendar Server Startup Options</b><p><b>Start after successful configuration</b> specifies whether to start Calendar Server automatically after a successful configuration.<p><b>Start on system startup</b> specifies whether to start Calendar Server automatically after a system startup. 

RuntimeSetupPanel-Gui-HeaderText = Runtime configuration
RuntimeSetupPanel-Gui-ServicePort-Label = Service Port
RuntimeSetupPanel-Gui-MaxSessions-Label = Maximum Sessions
RuntimeSetupPanel-Gui-MaxThreads-Label = Maximum Threads
RuntimeSetupPanel-Gui-NbProcesses-Label = Number of server processes
RuntimeSetupPanel-Gui-RuntimeUserId-Label = Runtime User ID
RuntimeSetupPanel-Gui-RuntimeGroupId-Label = Runtime Group ID
RuntimeSetupPanel-Gui-ServerStartup-Label = Calendar Server startup
RuntimeSetupPanel-Gui-StartAfterInstall-Label = Start after sucessful configuration
RuntimeSetupPanel-TTY-StartAfterInstall-Yes = Yes
RuntimeSetupPanel-TTY-StartAfterInstall-No = No
RuntimeSetupPanel-Gui-StartAtSystemStartup-Label = Start on system startup
RuntimeSetupPanel-TTY-StartAtSystemStartup-Yes = Yes
RuntimeSetupPanel-TTY-StartAtSystemStartup-No  = No

RuntimeSetupPanel-ProgressMsg-CheckingWebServicePort = The configuration program is checking that the local web service port is available
RuntimeSetupPanel-ProgressMsg-VerifyingGroup = Verifying Group...
RuntimeSetupPanel-ProgressMsg-VerifyingUser = Verifying User...
RuntimeSetupPanel-ProgressMsg-CreatingUser = Creating User...

RuntimeSetupPanel-ServiceUsage-String = Please enter a valid integer representing the TCP port to use for the Calendar User HTTP connections.

# screen that pops up when no port is specified
RuntimeSetupPanel-QandA1-Title = Web Port Required
RuntimeSetupPanel-QandA1-Message = Web Port is not specified.<p>{0}
RuntimeSetupPanel-QandA1-OkButton = OK

# screen that pops up when the port specified is not in the valid port range
RuntimeSetupPanel-QandA2-Title = Web Port invalid
RuntimeSetupPanel-QandA2-Message = Web Port (<b>{0}</b>) is out of range - it must be in the range 1-65535.<p>{1}
RuntimeSetupPanel-QandA2-OkButton = OK

# screen that pops up when the port specified is not in the valid port range
RuntimeSetupPanel-QandA3-Title = Please specify a valid port number
RuntimeSetupPanel-QandA3-Message = You must enter a valid port number between 1 and 65535
RuntimeSetupPanel-QandA3-OkButton = OK

RuntimeSetupPanel-QandA4-Title = Web Port in use
RuntimeSetupPanel-QandA4-Message = TCP port <b>\"{0}\"</b> is already in use by another server process running on this system.<p><i>The Calendar server will <b>not</b> successfully run until the specified TCP port is not in use.</i><p>Are you sure you want to use this TCP port for the Calendar User HTTP connections?
RuntimeSetupPanel-QandA4-AcceptButton = Accept
RuntimeSetupPanel-QandA4-ChooseNewButton = Choose New

RuntimeSetupPanel-QandA6-Title = Create new User id?
RuntimeSetupPanel-QandA6-Message = User ID <b>\"{0}\"</b> does not exist.<p>Do you want to create this user ID or enter a new user ID?
RuntimeSetupPanel-QandA6-CreateUserIdButton = Create User ID
RuntimeSetupPanel-QandA6-ChooseNewButton = Choose New

RuntimeSetupPanel-QandA7-Title = Problem creating User ID
RuntimeSetupPanel-QandA7-Message = User ID <b>\"{0}\"</b> could not be created; please enter a new user ID.
RuntimeSetupPanel-QandA7-ChooseNewButton = Choose New

RuntimeSetupPanel-QandA8-Title = Root User ID specified
RuntimeSetupPanel-QandA8-Message = User ID <b>\"{0}\"</b> has root (super-user) privileges. This is not recommended.<p>Are you sure you want the Calendar Server installed and run with the super-user?
RuntimeSetupPanel-QandA8-AcceptButton = Accept
RuntimeSetupPanel-QandA8-ChooseNewButton = Choose New

RuntimeSetupPanel-QandA9-Title = Could not grant permissions
RuntimeSetupPanel-QandA9-Message = Could not grant services rights to user ID <b>\"{0}\".</b>
RuntimeSetupPanel-QandA9-AcceptButton = Accept
RuntimeSetupPanel-QandA9-ChooseNewButton = Choose New

#
# wbLdapVerifyService
#   ldap error codes
ldapjavajdkresultcode-0 = Success
ldapjavajdkresultcode-1 = Operation Error
ldapjavajdkresultcode-2 = Protocol Error
ldapjavajdkresultcode-3 = Time Limit Exceeded
ldapjavajdkresultcode-4 = Size Limit Exceeded
ldapjavajdkresultcode-5 = Compare False
ldapjavajdkresultcode-6 = Compare True
ldapjavajdkresultcode-7 = Auth Method Not Supported
ldapjavajdkresultcode-8 = Strong Auth Required
ldapjavajdkresultcode-9 = LDAP Partial Results
ldapjavajdkresultcode-10 = Referral
ldapjavajdkresultcode-11 = Admin Limit Exceeded
ldapjavajdkresultcode-12 = Unavailable Critical Extension
ldapjavajdkresultcode-13 = Confidentiality Required
ldapjavajdkresultcode-14 = SASL Bind in Progress
ldapjavajdkresultcode-16 = No Such Attribute
ldapjavajdkresultcode-17 = Undefined Attribute Type
ldapjavajdkresultcode-18 = Inappropriate Matching
ldapjavajdkresultcode-19 = Constraint Violation
ldapjavajdkresultcode-20 = Attribute or Value Exists
ldapjavajdkresultcode-21 = Invalid Attribute Syntax
ldapjavajdkresultcode-32 = No Such Object
ldapjavajdkresultcode-33 = Alias Problem
ldapjavajdkresultcode-34 = Invalid DN Syntax
ldapjavajdkresultcode-35 = IS LEAF
ldapjavajdkresultcode-36 = Alias Dereferencing Problem
ldapjavajdkresultcode-48 = Inappropriate Authentication
ldapjavajdkresultcode-49 = Invalid Credentials
ldapjavajdkresultcode-50 = Insufficient Access Rights
ldapjavajdkresultcode-51 = Busy
ldapjavajdkresultcode-52 = Unavailable
ldapjavajdkresultcode-53 = Unwilling To Perform
ldapjavajdkresultcode-54 = Loop Detect
ldapjavajdkresultcode-64 =_Naming Violation
ldapjavajdkresultcode-65 = Object Class Violation
ldapjavajdkresultcode-66 = Not Allowed On Nonleaf
ldapjavajdkresultcode-67 =_Not Allowed On RDN
ldapjavajdkresultcode-68 = Entry Already Exists
ldapjavajdkresultcode-69 = Object Class Mods Prohibited
ldapjavajdkresultcode-70 = Results Too Large
ldapjavajdkresultcode-71 = Affects Multiple Dsas
ldapjavajdkresultcode-80 = Other
ldapjavajdkresultcode-81 = Server Down
ldapjavajdkresultcode-82 = Local Error
ldapjavajdkresultcode-83 = Encoding Error
ldapjavajdkresultcode-84 = Decoding Error
ldapjavajdkresultcode-85 = Timeout
ldapjavajdkresultcode-86 = Auth Unknown
ldapjavajdkresultcode-87 = Filter Error
ldapjavajdkresultcode-88 = User Cancelled
ldapjavajdkresultcode-89 = Param Error
ldapjavajdkresultcode-90 = No Memory
ldapjavajdkresultcode-91 = Connect Error
ldapjavajdkresultcode-92 = Not Supported
ldapjavajdkresultcode-93 = Control Not Found
ldapjavajdkresultcode-94 = No Results Returned
ldapjavajdkresultcode-95 = More Results To Return
ldapjavajdkresultcode-96 = Client Loop
ldapjavajdkresultcode-97 = Referral Limit Exceeded

#
# Component Display Names
#
cal-install-DisplayName = Calendar Server Core 
calsdk-install-DisplayName = Calendar Server SDK
scics-install-DisplayName = Sun Cluster HA agent for Calendar Server
