Patch-ID# 100639-01
Keywords: NC600, NC400, SNC, CTE
Synopsis: Sun Network Coprocessor Update
Date: 28/May/92

SunOS release: 4.1.2

Unbundled Product: NC400

Unbundled Release: 2.0.2

Topic:  This patch was made to allow Sun4 architecture customers to 
	update their software so as to correct various reported problems
	with the NC400 software running on Sun4 systems under SunOS 
	4.1.2.  This patch is not needed for Sun4m (4/6XX) class
	machines.  Please note that Sun's Release of SunSNC Rev 1.0 
	is for support of the the Sun4m architecture.  Customers who have 
	purchased the NC400 product through Sun to run on 4/4XX class 
	machines, cannot use SunSNC 1.0 release to upgrade their NC400 
	software.

BugId's fixed with this patch: 

Architectures for which this patch is available: sun4

Patches which may conflict with this patch: 

Obsoleted by: 

Files included with this patch: See File list included in the READ_ME_FIRST
				file in this directory.

Problem Description: 

	This patch is intended to fix various problems with the
	Sun Network Coprocessor running on Sun 4 systems under 
	Release 4.1.2 of the SunOS.  

Install Instructions: 


**** NOTE  ***** The directory in which you have loaded and from which you
		 will do the installation must be writeable by root for 
                 the installation to work correctly.

**** NOTE  ***** If you are already running a version of the Sun Network
		 Coprocessor you will need to deinstall that version prior
		 to installing this patch.  Please see the installation
	         instructions following.

As root:

	1) change to the appropriate installation directory for your 
	   system type.

		cd sun4/usr/etc/install/SNC

	2) If you are running a prior version of Sun Network Coprocessor
	   then deinstall that version by executing the deinstall command.

		./deinstall

	3) Install the patched version by executing the install command.

		./install