Patch-ID# 102758-01
Keywords: nsp, rt, x.25, DEC Phase V, I_Plink
Synopsis: Sunlink DNI 8.0: kernel patch - SUNWdniKR patch
Date: Aug/31/95

Solaris Release: 2.3 2.4

SunOS Release: 5.3 5.4

Unbundled Product: DNI

Unbundled Release: 8.0

Relevant Architectures: sparc

BugId's fixed with this patch: 1184404 1192224 1200751

Changes incorporated in this version:

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: >101458-03
	NOTE:101856-02 (for solaris 2.4), 101458-03

Obsoleted by: 

Files included with this patch: 

    nsp rt init.dni dnilink 

Problem Description: 

        Bug 1192224
        Disconnect message from SUN DNI 8.0 to DEC Phase V has
        incorrect message length.

        Bug 1184404
        SET HOST to a DNI 8.0 Sun fails over X.25 link

        Bug 1200751
        DNI 8.0 cannot restart - I_Plink 1: out of stream resources



Patch Installation Instructions: 
-------------------------------- 
Generic 'installpatch' and 'backoutpatch' scripts are provided
within each patch package with instructions appended to this section.
Other specific or unique installation instructions may also be
necessary and should be described below.

Special Install Instructions: 
----------------------------- 

   This patch requires a system reboot.

   For solaris 2.3 make sure Patch 101458-03 is installed before 102758-01
   there is no need for 101856-02.

   If you have solaris 2.4 or above and have already installed Patches 
   101458-03 and 101856-02, install the 102758-01 patch and reboot the system.

   If you are upgrading to solaris 2.4 or above from 2.3 please follow
   the instructions below:

     1) Do pkgrm for all dni 8.0 packages and patches.
     2) Reinstall the following packages from the DNI 8.0 CD using pkgadd.
	1. SUNWdniCU
	2. SUNWdniMA
	3. SUNWabdni  

     3) Install patch 101458-03

     (Ignore the warnings - missing SUNWdniKR) 

     4) Using pkgadd install 101856-02 

     5) Install patch 102758-01

     6) Reboot the system.