Patch-ID# 105054-02
Keywords: HOSTACCESS print 8bit international VT220 ANSI emulation file transfer  
Synopsis: SNC 3.0, 3.1: 8bit print, VT/VT200/ANSI emulation, protocol file transfer
Date: Sep/09/97

Solaris Release:  

SunOS Release: 

Unbundled Product: Solstice Network Client

Unbundled Release: 3.0, 3.1

Relevant Architectures: i86pc

BugId's fixed with this patch: 4053537 4064663 4032854 4067495 4028377 4028376 4027926 

Changes incorporated in this version: 4064663 4032854 4067495 4028377 4028376 4027926 

Patches accumulated and obsoleted by this patch: 105054-01

Patches which conflict with this patch:  

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

 readme.txt
 ha6cabt.dll
 ha6cpit.dll
 ha6eedf.dll
 ha6ehot.dll
 ha6nnfs.dll
 ha6nsoc.dll
 ha6reng.dll
 ha6seng.dll
 ha6xaxe.dll
 host.exe
 host.cnt
 host.hlp

Problem Description: 

 4053537 Hostaccess has difficulty printing extended ASCII characters
 4064663 Keypad does not work correctly in Application Mode for VT emulation
 4032854 HOSTACCESS doesn't support the Polish character set           
 4067495 $indfile protocol file transfer not working w/ HOST ACCESS
 4028377 IND$FILE transfer problems                                   
 4028376 VT220 emulation colors are wrong                             
 4027926 SCO ANSI emulation: high ASCII characters are wrong   

Patch Installation Instructions: 
 
 This patch is packaged as a self-extracting compressed file (10505402.exe).  
 It must be installed from Windows 3.11.  The setup program backs up the original 
 file(s).  It then installs the new file(s) and a patch uninstall utility. 

 To install, download 10505402.exe to a temporary directory on the PC.  
 
 In Windows, select "Run" from the "Start" menu.  Enter the path and 
 patch filename (Example: c:\temp\10505402) then select "OK".  

 The patch will uncompress and start the setup program automatically.  
 Follow the setup program prompts to complete the patch installation.  

 Restart Windows.


Patch Removal Instructions:

 In Windows, click "Start".  Then select "Programs", "Patch 10505402"
 and click on "uninstallSHIELD".  

 WARNING - The patch uninstall program restarts Windows at the end
           of the uninstall process.
 

Installation Notes:

 All drive letter and directory name references are Solstice Network Client
 defaults. If you have installed Solstice Network Client or the patch file on 
 a different drive, or in a different directory, substitute your 
 drive and directory names in the example commands above.