Patch-ID# 105057-03
Keywords: snc DDE last opened newest session Hostaccess
Synopsis: Synopsis: Solstice Network Client (SNC) 3.0, 3.1: DDE only works in last opened,newest session in Hostaccess 
Date: Dec/24/97

Solaris Release:  

SunOS Release: 

Unbundled Product: Solstice Network Client (SNC)

Unbundled Release: 3.0 3.1

Relevant Architectures: i386

BugId's fixed with this patch: 4095957 4053537 4064663 4032854 4067495 4028377 4028376 4027926  

Changes incorporated in this version: 4095957

Patches accumulated and obsoleted by this patch:

Patches which conflict with this patch:  

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 
readme.txt
10505703.exe
ha7cabt.dll
ha7cimg.dll
ha7ehot.dll
ha7sdum.dll
host32.exe
ha7ccfg.dll
ha7cpit.dll
ha7nmdm.dll
ha7xaxe.dll
host32.hlp
ha7cchk.dll
ha7eedf.dll
ha7nsoc.dll
host32.cnt

NOTE:
1) readme.txt ---> This file

2) 10505703.exe --> includes the following:
   
   ha7cabt.dll  ha7cimg.dll  ha7ehot.dll  ha7sdum.dll  host32.exe
   ha7ccfg.dll  ha7cpit.dll  ha7nmdm.dll  ha7xaxe.dll  host32.hlp
   ha7cchk.dll  ha7eedf.dll  ha7nsoc.dll  host32.cnt
 
Problem Description: 

 4095957: DDE only works in last opened,newest session in Hostaccess

 4053537: Hostaccess has difficulty printing extended ASCII characters

 4064663: Keypad does not work correctly in Application Mode for VT emulation

 4032854: HOSTACCESS doesn't support the Polish character set
           
 4067495: $indfile protocol file transfer not working w/ HOST ACCESS

 4028377: IND$FILE transfer problems   
                                
 4028376: VT220 emulation colors are wrong 
                            
 4027926: SCO ANSI emulation: high ASCII characters are wrong
 
Patch Installation Instructions:

   Note: 
         If you applied the older revs (105057-01/02) of this patch -please remove it 
         before applying this patch(105057-03).
         This patch is for the 32-bit version of hostaccess application only.
         It can be applied to SNC 3.0 or 3.1.

 This patch is packaged as a self-extracting compressed file (10505703.exe).  
 It must be installed from Windows.  The setup program backs up the original 
 file(s).  It then installs the new file(s) and a patch uninstall utility. 

 To install, download 10505703.exe to a temporary directory on the PC.  
 
 In Windows, select "Run" from the "Start" menu.  Enter the path and 
 patch filename (Example: c:\temp\10505703.exe) then select "OK".  

 The patch will uncompress and start the setup program automatically.  
 Follow the setup program prompts to complete the patch installation.  

 Restart Windows.


Patch Removal Instructions:

 In Windows, click "Start".  Then select "Programs", "Patch 105057-03"
 and click on "uninstallSHIELD".  

 WARNING - The patch uninstall program restarts Windows at the end
           of the uninstall process.
 

Installation Notes:

 All drive letter and directory name references are Solstice Network Client
 defaults. If you have installed Solstice Network Client or the patch file on 
 a different drive, or in a different directory, substitute your 
 drive and directory names in the example commands above.