Patch-ID# 111774-01
Keywords: StorTools
Synopsis: StorTools: Updated StorTools 4.1
Date: Oct/16/2001

Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: StorTools

Unbundled Release: 4.1

Xref: 

Topic: 

Relevant Architectures: sparc

BugId's fixed with this patch: 4488349 4491325 4494623 4494951 4498185 4498201

Changes incorporated in this version: 4498185 4498201 4488349 4491325 4494623 
4494951

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

SUNWvtsst

Problem Description:

(111774-01)
 
4498185 t3 fails expert with stress on GUI but passes cli                        
4498201 Switchtest hangs when tx from remote e-port to local e-port is attenua
4488349 Expert indicates wrong suspect FRU when remote e port GBIC is bad.
4491325 Expert incorrectly diagnoses a bad gbic in Mamba config with a3500fc
4494623 Expert does not isolate remote e-port gbic in single ISL config with m
4494951 Functional message log does not tell user to cause failover when in ST
4482359 Receive "Error while Bind - last error code 125" error while running e
4487564 Switchtest fails a pattern a probable cause of failure is not another
4491652 Need to update switchtest callouts when gbic is disconnected from swit
4494543 Need to clear Port Status bits before entering retest.
4494631 Need to remove a step in expert isolation for tape
4495186 switchtest is reporting failure of entire chasis when only a port
4495608 Snapshot diff indicated wrong Physical Group on device that disappeare
4493887 Switchtest message 6009 does not give Recommended action
4425686 Should replace GBICs before replacing fiber in cli Expert.
4488256 Expert can not isolate defective GBIC in E port of remote switch
4492670 STORtools 4.1 generates Segmentation Fault - core dumped messages.
4487567 Expert needs to indicate suspect FRU when Eport GBIC is defective.
4488344 With two ISL links, failure of functional test does not give CLI Exper
4488345 Expert: Instruction 1048 indicates wrong port
4490909 discman -v not picking up config changes
4484347 t3test: user selects nonhex value, gets warning message in window, tes
4485669 Can not enter manual numeric values in StorTools Options sub-menus
4486480 Failure does not tell you to run expert
4487452 a5ktest passes when you unmount file system during test
4489068 Incorrect expert instruction during expert to tape
4489751 running t3test with fiber disconnected failure list needs updating
4492240 Functional test should give user the CxTxDxSx name rather than REGISTE
4492414 Expert does not isolate to directly attached fiber (when bad)
4395061 Request that expert fault isolation condense instructions

Patch Installation Instructions:
-------------------------------- 
Refer to the Install.info file for instructions on using the
generic 'installpatch' and 'backoutpatch' scripts provided with
each patch.  Any other special or non-generic installation
instructions should be described below as special instructions.

Special Install Instructions:
----------------------------- 
 
None.

README -- Last modified date:  Wednesday, October 17, 2001