Patch-ID# 112401-04
Keywords: SunMC U10 SIMMs PCI memleak V880 picld
Synopsis: Sun Management Center 3.0 PU 4 WGS patch for Solaris 8 and Solaris 9
Date: Jun/24/2003

Install Requirements: None                      
                      
Solaris Release: 8 9

SunOS Release: 5.8 5.9

Unbundled Product: Sun Management Center

Unbundled Release: 3.0 PU4
NOTE: 3.0 Platform Update 4, RR and GA releases (Build 73)

Xref: 

Topic: 

Relevant Architectures: sparc

BugId's fixed with this patch: 4407106 4532848 4554324 4627180 4630473 4693168 4765301 4766348 4774303 4800401 4801030 4809968 4815803

Changes incorporated in this version: 4765301 4766348 4774303 4800401 4801030 4809968 4815803

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWsymon/addons/SUNWeswga/sbin/es-setup.sh
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/libcfgpiclWG.so.1.0
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/libcfgsun4uWG.so.1.0
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/libconfigdWG.so.1.0
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/pkgconfigdWG.so.1.0
/opt/SUNWsymon/base/lib/sparc-sun-solaris2.8/pkgpfaWG.so.1.0
/opt/SUNWsymon/bin/configdWG
/opt/SUNWsymon/classes/com/sun/symon/base/modules/Config-Reader4uwg.properties
/opt/SUNWsymon/lib/platform/cfg/SUNW,Sun-Fire-280R/sunmcplugin.conf
/opt/SUNWsymon/lib/platform/cfg/SUNW,Sun-Fire-880/libsunmc880plugin.so.1
/opt/SUNWsymon/lib/platform/cfg/sunmc_common.conf
/opt/SUNWsymon/mdr/modules/cfg/Config-Reader4uwg-d.x   
/opt/SUNWsymon/mdr/modules/cfg/Config-Reader4uwg-models-d.x
/opt/SUNWsymon/mdr/modules/cfg/Config-Reader4uwg-ruletext-d.x
/opt/SUNWsymon/modules/cfg/Config-Reader4uwg-d.rul
/opt/SUNWsymon/modules/cfg/Config-Reader4uwg-d.x   
/opt/SUNWsymon/modules/cfg/Config-Reader4uwg-models-d.x
/opt/SUNWsymon/modules/cfg/Config-Reader4uwg-ruletext-d.x

Problem Description:

4407106 Config reader aborts on U10 with high density SIMMs
4532848 User not able to edit Error Count Attribute in SIMMs table
4554324 Config-Reader does not detect Correctable Memory Errors caused by PCI dvma read
4627180 Module rules parameter shown as base.modules.Config on rcr4u234 rule
4630473 memory leak causes SunMC agent to abort because Excessive Virtual Memory Use
4693168 picld  Received signal: Segmentation Fault when configdWG is used
4765301 No PV/LV for some WGS-supported machines on console
4766348 Tooltips contain irrelevant info from the actual Hardware icons
4774303 The fans on a 280r do not show up in the browser tree
4800401 Config Reader causes tapes to rewind on 280R, V480 and V880
4801030 Config Reader does not display pci-cards in littleneck physical view
4809968 CE message has changed and rcr4u212 regex does not match anymore
4815803 Config-reader does not work correctly on clustered nodes

Patch Installation Instructions:
-------------------------------- 
It is recommended that you install patch 108528-21 prior to installing this
patch.
 
Refer to the man pages for instructions on using 'patchadd' and 
'patchrm' scripts provided with Solaris. Any other special or 
non-generic installation instructions should be described as 
special instructions. The following example installs a patch to 
a standalone machine:
 
example# patchadd /var/spool/patch/112401-04
The following example removes a patch from a standalone system:
example# patchrm 112401-04
For additional examples please see the appropriate man pages.

Special Install Instructions:
----------------------------- 
 
This patch needs to applied to all WGS agent machines in the Sun Management
Center environment and to all server machines being used to monitor WGS agents.
 
Please follow the steps below for this patch
 
1. Stop all Sun Management Center processes using
   $BASEDIR/SUNWsymon/sbin/es-stop -A ($BASEDIR is the directory where,
   Sun Management Center has been installed. By default this directory
   is /opt, thus /opt/SUNWsymon/sbin/es-stop -A)
2. Install this patch as per Patch Installation Instructions
3. Run setup of Sun Management Center using
   $BASEDIR/SUNWsymon/sbin/es-setup ($BASEDIR is the directory where,
   Sun Management Center has been installed. By default this directory
   is /opt, thus /opt/SUNWsymon/sbin/es-setup)
4. Start all Sun Management Center processes with,
   $BASEDIR/SUNWsymon/sbin/es-start -A , by default:
   /opt/SUNWsymon/sbin/es-start -A

README -- Last modified date:  Tuesday, June 24, 2003