Patch-ID# 112490-04
Keywords: starfire hub ssp cbe.ima edd
Synopsis: SSP 3.5: lower Ambient Temperature Shutdown Setpoints and enable power
Date: Apr/08/2004


Install Requirements: See Special Install Instructions                      
                      
Solaris Release: 7 8 9

SunOS Release: 5.7 5.8 5.9

Unbundled Product: System Service Processor

Unbundled Release: 3.5

Xref: 

Topic: SSP 3.5: lower Ambient Temperature Shutdown Setpoints and enable power

Relevant Architectures: sparc

BugId's fixed with this patch: 4475590 4527755 4630644 4780401 4812413

Changes incorporated in this version: 4780401

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWssp/bin/edd
/opt/SUNWssp/cbobjs/cbe.ima

Problem Description:

4780401 Voltage readings have exceeded the thresholds message doesn't appear
 
(from 112490-03)
 
4812413 Both SSPs turn into SPARE after power off/on spare hub
 
(from 112490-02)
 
4475590 procestemp reports "0.00" temperature values
 
(from 112490-01)
 
4527755 lower Ambient Temperature Shutdown Setpoints and enable power off logic
4630644 ADC ring unlock failure for centerplane and control board

Patch Installation Instructions:
--------------------------------
Refer to the Install.info file within the patch for instructions on
using the generic 'installpatch' and 'backoutpatch' scripts provided
with each patch. Any other special or non-generic installation
instructions should be described below.

Special Install Instructions:
-----------------------------
 
Follow these steps when installing on the MAIN SSP:
 
1. Shut off SSP failover according to the SSP Users Guide
2. Stop the SSP processes:
  /etc/init.d/ssp stop
3. Install the patch
4. Run ssp_config:
  /opt/SUNWssp/bin/ssp_config
5. Enable SSP failover if it was running before.

README -- Last modified date:  Thursday, April 8, 2004