Patch-ID# 112838-11

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: atm 155utp fcode pcicfg
Synopsis: SunOS 5.9: pcicfg Patch
Date: Sep/12/2005


Install Requirements: Reconfigure immediately after patch is installed                      
                      
Solaris Release: 9

SunOS Release: 5.9

Unbundled Product: 

Unbundled Release: 

Xref: 

Topic: SunOS 5.9: pcicfg Patch
        **********************************************************************
        NOTE: This patch may contain one or more OEM-specific platform ports.
              See the appropriate OEM_NOTES file within the patch for
              information specific to these platforms.
              DO NOT INSTALL this patch on an OEM system if a corresponding
              OEM_NOTES file is not present (or is present, but instructs not
              to install the patch), unless the OEM vendor directs otherwise.
        **********************************************************************

Relevant Architectures: sparc sparc.sun4u

BugId's fixed with this patch: 4407705 4496757 4711639 4716320 4716448 4717617 4718370 4787898 4792953 4793178 4834066 4835953 4853539 4879904 4948204 5001947 5076027

Changes incorporated in this version: 5076027

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/platform/sun4u/kernel/misc/sparcv9/fcpci
/platform/sun4u/kernel/misc/sparcv9/pcicfg.e
/usr/include/sys/pci.h

Problem Description:

5076027 Add Support for XMITS 3.0 and PCI-X
 
(from 112838-10)
 
4879904 device tree isn't built correctly after a series of hotplug commands
 
(from 112838-09)
 
5001947 Fix for 4787898 got clobbered by fix for 4718370
 
(from 112838-08)
 
4948204 pcicfg should not reprobe the bars after fcode runs successfully
 
(from 112838-07)
 
4718370 panic when PCI card is configured with hot plug
4792953 Physically hotplug a Jasper card results in warning when configured
4834066 pcicfg does not pass the prefetch bit to PCI allocator
4835953 ndi_ra_free: bad free messages seen while unconfiguring qlc
4853539 ndi_ra_free() should be more robust
 
(from 112838-06)
 
4716320 Framebuffer cannot power up after pressing stop-a from FBPM state
4793178 scsi_watch_thread won't suspend when concurrent pm activity
4787898 sci link fails to communicate after hotplug operation
 
(from 112838-05)
 
Uprev to -05 for Fujitsu porting
 
(from 112838-04)
 
4711639 PCI-to-PCI I/O base and limit registers are improperly programmed
4496757 hotplug of cauldron into C5V1 causes panic during configuration
 
(from 112838-03)
 
4717617 pcicfg driver fails to configure the PCI card with PCI Hot Plug
 
(from 112838-02)
 
4716448 problems configuring PCI card with fcode < 8kb
 
(from 112838-01)
 
4407705 ATM 155utp card giving FCODE errors that result in a PANIC

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-10 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
       example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
       example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
 
NOTE:  To get the complete fix for the bugids listed under 112838-07,
       please also install the following patch:
 
       115488-01 (or greater) busra patch
 
       The bugids for 112838-07 are as follows:
 
        4718370 panic when PCI card is configured with hot plug
        4792953 Physically hotplug a Jasper card results in warning 
                    when configured
        4834066 pcicfg does not pass the prefetch bit to PCI allocator
        4835953 ndi_ra_free: bad free messages seen while unconfiguring qlc
        4853539 ndi_ra_free() should be more robust

README -- Last modified date:  Monday, September 12, 2005