Patch-ID# 114951-05 Keywords: state_arq_done arq disabled connect removed disk scsi reset Synopsis: SunOS 5.9: FUJITSU ULTRA LVD SCSI Host Bus Adapter Driver 1.0 Date: Jun/18/2004 Install Requirements: Reboot after installation See Special Install Instructions Solaris Release: 9 SunOS Release: 5.9 Unbundled Product: Unbundled Release: Xref: Topic: SunOS 5.9: FUJITSU ULTRA LVD SCSI Host Bus Adapter Driver 1.0 Relevant Architectures: sparc.sun4us BugId's fixed with this patch: 4817865 4837781 4837785 4837786 4837787 4837788 4837789 4917774 4917776 4917778 4951668 5006444 5048561 5048567 Changes incorporated in this version: 5048561 5048567 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /platform/sun4us/kernel/drv/fjulsa /platform/sun4us/kernel/drv/sparcv9/fjulsa Problem Description: 5048561 STATE_ARQ_DONE is notified even if ARQ is disabled. 5048567 When trying to connect to a removed disk device, SCSI Reset is issued. (from 114951-04) 5006444 Multi-initiator support. (from 114951-03) 4951668 Panic if DR/PHP of U320 card is performed twice. (from 114951-02) 4917774 Abnormal state of the SCSI controller may be notified under restoration processing after command timeout detection. 4917776 When reset is issued in the restoration processing after SCSI bus error detection, reset processing may carry out an abnormal end. 4917778 Transfer speed of SCSI bus may become slow while booting. (from 114951-01) 4817865 U320 driver detects command timeout. 4837781 Panic may occur if U320 driver detects abnormality on the SCSI bus while booting. 4837785 resources for U320 controller LSI decrease. 4837786 Improvement of transfer rate change procedure executed when U320 driver detects abnormality on the SCSI bus. 4837787 SCSI ID of the initiators overlaps in the multi initiator environment. 4837788 U320 driver cannot control the tape library device. 4837789 Improvement of amount of acquired resource for firmware download. Patch Installation Instructions: -------------------------------- For Solaris 9 release, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/114951-05 The following example removes a patch from a standalone system: example# patchrm 114951-05 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- Reboot the system after patch installation. The fix(es) included in the patch will not take effect until after the system has been rebooted. If possible, perform patch installation in single user mode. If this can not be done, we recommend having the system in as quiet a state as possible: no users logged on, no user jobs running README -- Last modified date: Friday, June 18, 2004