Patch-ID# 114994-08 Keywords: primepower vlan dr panic ndd flow sync link sx Synopsis: SunOS 5.9: FUJITSU PCI GigabitEthernet 2.0 patch Date: Jun/23/2005 Install Requirements: See Special Install Instructions Reboot after installation Solaris Release: 9 SunOS Release: 5.9 Unbundled Product: Unbundled Release: Xref: Topic: SunOS 5.9: FUJITSU PCI GigabitEthernet 2.0 patch Relevant Architectures: sparc.sun4us BugId's fixed with this patch: 2120943 4841231 4841239 4841244 4841248 4891077 4891084 4940787 4940788 4976257 4976340 4976348 4976355 5035580 5067290 6178751 6263610 Changes incorporated in this version: 6263610 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /platform/sun4us/kernel/drv/fjgi /platform/sun4us/kernel/drv/sparcv9/fjgi Problem Description: 6263610 Many rcp connections disable UDP and ICMP transmissions. (from 114994-07) 2120943 After unplumb the receive function cannot be stopped. 6178751 Link Aggregation function supported. (from 114994-06) 5067290 Performance improvement for NFS, latency, and CPU usage. (from 114994-05) 5035580 When doing network installation with DHCP, the driver cannot proceed to receive data. (from 114994-04) 4976257 When 16 or more NICs are mounted, system panics with BAD TRAP. 4976340 Cannot set a specific MAC address. 4976348 Add function for Vlan support. 4976355 After physical reset, promiscuous mode is off. (from 114994-03) 4940787 DR panic when receiving data transmit request in suspend mode 4940788 Slow performance when sending UDP packets (from 114994-02) 4891077 PW008GE4 can't sense the link status 4891084 Fix (Patch#114994-01/114536-02) for BugID#4841231 is not adequate (from 114994-01) 4841231 The bug #4809792 was not fixed. So, system panic occurs. 4841239 Using PW008GE5, Autonegotiation may not be set On with ndd command. 4841244 There is no sync function before DMA transfer, this may cause some problem. 4841248 The FlowControl auto setting is wrong. Patch Installation Instructions: -------------------------------- For Solaris 9 release, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/114994-08 The following example removes a patch from a standalone system: example# patchrm 114994-08 For additional examples please see the appropriate man pages. Special Install Instructions: ---------------------------------------- Reboot the system after patch installation. The fix(es) included in the patch will not take effect until after the system has been rebooted. If possible, perform patch installation in single user mode. If this can not be done, we recommend having the system in as quiet a state as possible: no users logged on, no user jobs running. README -- Last modified date: Thursday, June 23, 2005