Patch-ID# 116330-01
Keywords: ip persistence, load balance, server disable
Synopsis: Sun Fire B10n Content Load Balancing Patch
Date: Oct/27/2003


Install Requirements: Additional instructions may be listed below                      
                      
Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: Sun Fire B10n

Unbundled Release: 1.0

Xref: 

Topic: 

Relevant Architectures: sparc

BugId's fixed with this patch: 4927883

Changes incorporated in this version: 4927883

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

B10n/sunfire_b10n.1_0_1

Problem Description:

4927883 B10n sends traffic to disabled(Down) server when IP persistence is enabled.

Patch Installation Instructions:
 

Special Install Instructions:
-----------------------------
 
1) Copy/Download the sunfire_b10n_1_0_1 image to a tftp server.
 
2) Using the 'show system' command, find out the current running image slot 
   (Eg. '1'). Choose the other slot to update this latest image (Eg. '2').
 
3) Using 'update image' command on the SunFire B10n blade, update the other 
   image slot (Eg. '2') with this image.
 
4) Once update image is successful, configure the next boot image to be this 
   new image using the 'config boot image' command followed by 'commit' and 
   REBOOT your SunFire B10n blade. In this case, the command would be 
   'config boot image 2' followed by 'commit'.
 
5) Verify that the current running image is the new image using 'show system' 
   command.
 
6) To revert back to the original image that you had before updating this 
   latest image, simply change the boot image to original using the 
   'config boot image' command followed by 'commit' and REBOOT your 
   SunFire B10n blade. To revert back, in this case, the command would be 
   'config boot image 1' followed by 'commit' and REBOOT.
 
For more details please refer to the image upgrade procedures in the SunFire 
B10n Content Load Balancing Blade Administration Guide.

README -- Last modified date:  Monday, October 27, 2003