Patch-ID# 116971-03 Keywords: picl shutdown dimm fan temperature environmental prtdiag prtpicl Synopsis: SunOS 5.8: Picl plugins sensor corrections for Sun-Blade-2500 patch Date: Dec/07/2004 Install Requirements: Reconfigure immediately after patch is installed Solaris Release: 8 SunOS Release: 5.8 Unbundled Product: Unbundled Release: Xref: Topic: SunOS 5.8: Picl plugins sensor corrections for Sun-Blade-2500 patch *********************************************************** NOTE: This patch may contain one or more OEM-specific platform ports. See the appropriate OEM_NOTES file within the patch for information specific to these platforms. DO NOT INSTALL this patch on an OEM system if a corresponding OEM_NOTES file is not present (or is present, but instructs not to install the patch), unless the OEM vendor directs otherwise. *********************************************************** Relevant Architectures: sparc BugId's fixed with this patch: 4955544 4955554 5023674 5082877 5106210 Changes incorporated in this version: 5106210 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: 108528-29 or greater Obsoleted by: Files included with this patch: /etc/driver_aliases /etc/name_to_major /platform/sun4u/kernel/drv/sparcv9/pic16f819 /usr/platform/SUNW,Sun-Blade-2500/lib/picl/plugins/envmodel.conf /usr/platform/SUNW,Sun-Blade-2500/lib/picl/plugins/libpiclenvd.so.1 /usr/platform/SUNW,Sun-Blade-2500/lib/picl/plugins/piclfrutree.conf Problem Description: 5106210 prtdiag fails to print temperature sensor info on Enws+ due to 5082877 (from 116971-02) 5082877 picl daemon for Enchilada+ should monitor hard disk temperature. 4955544 Fiesta workstations env. plugin ES segment code corrupts picl data 4955554 picl plugins sensor correction code doesn't extrapolate past ends of the table (from 116971-01) 5023674 picl daemon for Enchilada should do a graceful shutdown if DIMM Fan fails Patch Installation Instructions: -------------------------------- For Solaris 2.0-2.6 releases, refer to the Install.info file and/or the README within the patch for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. For Solaris 7-9 releases, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/104945-02 The following example removes a patch from a standalone system: example# patchrm 104945-02 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- Perform a reconfiguration boot, boot -r, after patch installation. README -- Last modified date: Tuesday, December 7, 2004