Patch-ID# 117098-01
Keywords: sun fire 15k axq 6.3 split expanders libpower
Synopsis: SMS 1.4: libPower patch
Date: Mar/25/2004


Install Requirements: See Special Install Instructions                      
                      
Solaris Release: 8 9

SunOS Release: 5.8 5.9

Unbundled Product: System Management Services

Unbundled Release: 1.4

Xref: 

Topic: SMS 1.4: libPower patch

Relevant Architectures: sparc

BugId's fixed with this patch: 4974982

Changes incorporated in this version: 4974982

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 116861-02 or greater

Obsoleted by: 

Files included with this patch: 

/opt/SUNWSMS/SMS1.4/lib/libPower.so.1

Problem Description:

4974982 sms Support for AXQ 6.3 with split expanders

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-9 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
        example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
* To get the complete fix for 4974982,  patch 116861-02, or higher, must be
  installed prior to this patch.
 
Follow these steps when installing on the SC:
1. Record which SC is the main SC.
2. Disable failover on MAIN SC (setfailover off).
3. Stop the SMS processes on both SC's simultaneously.
        /etc/init.d/sms stop
4. Install the patch on both SC's.
5. Start the SMS processes on the previous main SC first.
        /etc/init.d/sms start
6. After all the sms processes have started (i.e. you're able to run the
   showenvironment command and get all the system's status),
   start the SMS processes on the Spare SC next.
7. Enable failover on MAIN SC (setfailover on).

README -- Last modified date:  Thursday, March 25, 2004