Patch-ID# 117371-08 Keywords: sun fire 15k hpost redx libxcpost.so Synopsis: SMS 1.4.1: hpost redx libxcpost.so patch Date: Jun/08/2005 Install Requirements: See Special Install Instructions Solaris Release: 8 9 SunOS Release: 5.8 5.9 Unbundled Product: System Management Services Unbundled Release: 1.4.1 Xref: Topic: SMS 1.4.1: Relevant Architectures: sparc BugId's fixed with this patch: 4774140 4838858 4934573 4943893 4971389 4975645 5019759 5023600 5026899 5028489 5030572 5030612 5030965 5033832 5039414 5042013 5047640 5049383 5055895 5064369 5064481 5066219 5070022 5074115 5081526 5088108 5096410 5101378 5102667 5102839 5102841 5103413 5103433 5109787 6194200 6202822 6212412 6216367 6234581 6235113 6275664 6275727 Changes incorporated in this version: 6275664 6275727 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: NOTE: Patch 117002-03, or higher, must be applied if running Solaris 8, Patch 113027-04, or higher, must be applied if running Solaris 9. Obsoleted by: Files included with this patch: /opt/SUNWSMS/SMS1.4.1/bin/hpost /opt/SUNWSMS/SMS1.4.1/bin/redx /opt/SUNWSMS/SMS1.4.1/lib/libxcpost.so Problem Description: 6275664 SMS hpost changes required to support Micron dimms (dram die Y16Y) 6275727 Unable to install 117371-07 due to inherent problems in its prepatch script (from 117371-07) 6202822 Don't allow 2 GB dimms on V2 uniboards (Starcat) 6212412 Display cmp cores as failed for proc fail 6216367 hpost needs to accept lpost 5.18.1 without warning messages 6234581 post support for lxt9880 hub chip on hsPCI+ board 6235113 Remove POST warning message for Jaguar 3.1 (from 117371-06) 5028489 starcat post needs to support lpost version 5.18.0 5039414 post should provide a way to specify an lbist signature for an asic 5102839 Post needs to support lbist for the new NEC asics 5109787 DCDS parity control misconfiguration 6194200 Limit XIR retry messages (from 117371-05) 5081526 wfail misdiagnoses memory MTag UE/NE DStop 5088108 wfail should not ignore DCDS DPE for US4 procs 3.1 and later 5096410 Don't use unreliable DX errors on Jag brds for diagnosis 5101378 Redx display for xmits chip should include a revision number field 5102667 Confusing message from redx on non-SC platform 5102841 Add support for lpost version 5.17.2, and support with up-rev warning for 5.18.0 5103413 A failed I/O board BBC should cause the board to be crunched 5103433 I/O cage POST names Service FRU for RStop in domain (from 117371-04) 4774140 seeprom on hPCI+ not in dump 4838858 redx use of DX pause timeout 4934573 SMS redx/post/etc should handle compressed dump files 5047640 post on xmits 2.1 does not recognize the CID at high verbosity 5049383 wfail misdiagnoses a datapath UE fault on the EXB. 5055895 Hpost should support lpost 5.17.1 without warning message 5064369 wfail FRU misidentification of a clock failure on CSB 5064481 hpost -H of MaxCPU IOxx fails if SBxx in target domain, vice versa 5066219 Irrelevant processor error printed by wfail. 5070022 Excessive xcstate files created during hpost -Q 5074115 Change control method for engineering .postrc commands (from 117371-03) 5026899 SMS POST support for 1200 MHz USIV processors (from 117371-02) 4943893 dstop during POST - AXQ and SDI are inconsistant 4971389 Jaguar SB indicated as primary service FRU during DR to a MCPU domain 4975645 Allow MaxCPU in split expander with AXQ 6.3 5023600 wfail should recognize EXBs reset during operation 5030572 Skip hsPCI+ workaround for AXQ 6.3 5030612 force_axq_xmits_throttle_vector doesn't work if only slot 0 present. 5030965 Accept AXQ 6.3 without warning 5042013 starcat post needs to support xmits 2.1 with out warning message (from 117371-01) 5019759 Add retries for XIRs used for I/O test cage. 5033832 Add retries for XIRs during POST Patch Installation Instructions: -------------------------------- For Solaris 2.0-2.6 releases, refer to the Install.info file and/or the README within the patch for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. For Solaris 7-9 releases, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/104945-02 The following example removes a patch from a standalone system: example# patchrm 104945-02 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- Required patches: Solaris patch 117002-03 if running Solaris 8 Solaris patch 113027-04 if running Solaris 9 To get the complete fix for 6275664, patch 117772-04 is required (this patch must be installed first).. Follow these steps when installing on the SC: 1. Record which SC is the main SC. 2. Disable failover on MAIN SC (setfailover off). 3. Stop the SMS processes on both SC's simultaneously. /etc/init.d/sms stop 4. Install the patch on both SC's. 5. Start the SMS processes on the previous main SC first. /etc/init.d/sms start 6. After all the sms processes have started (i.e. you're able to run the showenvironment command and get all the system's status), start the SMS processes on the Spare SC next. 7. Enable failover on MAIN SC (setfailover on). README -- Last modified date: Wednesday, June 8, 2005