Patch-ID# 117717-01 Keywords: sun fire e6900 e4900 6800 4810 4800 3800 platform fixes Synopsis: SunMC 3.5V3: platadmin Date: Oct/05/2004 Install Requirements: See Special Install Instructions Solaris Release: 7 SunOS Release: 5.7 Unbundled Product: Sun Management Center Unbundled Release: 3.5V3 Xref: Topic: SunMC 3.5: platadmin Relevant Architectures: sparc BugId's fixed with this patch: 4970824 4989067 Changes incorporated in this version: 4970824 4989067 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: 117712-01 or greater Obsoleted by: Files included with this patch: /opt/SUNWsymon/modules/cfg/serengeti-platadmin-d.prc /opt/SUNWsymon/modules/cfg/serengeti-platadmin-models-d.x Problem Description: This patch in conjunction with 117712-01 provides fixes to SunMC 3.5/u1 to fully support hotswap monitoringi on Solaris 7 systems. 4970824 Hardware PV and LV are not updated when a component is hotswapped. 4989067 Node Names of IO/CPU tables were displayed incorrectly after the hotplug. Patch Installation Instructions: -------------------------------- For Solaris 7-8 releases, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/104945-02 The following example removes a patch from a standalone system: example# patchrm 104945-02 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- Install this patch anywhere a SunMC 3.5/u1 agent layer is installed. Restarting the Platform Agent is required. (es-stop -l; es-start -l) NOTE! Minimum Sun Fire Midrange System Controller Firmware Requirement: 5.17.0 README -- Last modified date: Tuesday, October 5, 2004