Patch-ID# 117772-02
Keywords: sun fire 15k lpost 5.17.2
Synopsis: SMS 1.4.1: lpost 5.17.2
Date: Oct/21/2004


Install Requirements: See Special Install Instructions                      
                      
Solaris Release: 8 9

SunOS Release: 5.8 5.9

Unbundled Product: System Management Services

Unbundled Release: 1.4.1

Xref: 

Topic: SMS 1.4.1:

Relevant Architectures: sparc

BugId's fixed with this patch: 4683268 4911531 4934890 4982034 4984203 4987176 4988128 4993985 4994905 4997043 5006810 5009856 5010205 5011320 5015488 5027547 5029856 5030395 5031658 5034739 5034767 5035293 5036321 5042076 5042636 5049265 5051257 5051422 5062510 5065337 5068391 5083664

Changes incorporated in this version: 4683268 4911531 4984203 5006810 5009856 5011320 5027547 5034739 5036321 5042636 5049265 5051257 5051422 5062510 5065337 5068391 5083664

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWSMS/SMS1.4.1/hostobjs/caged_pcilpost.elf
/opt/SUNWSMS/SMS1.4.1/hostobjs/explpost.elf
/opt/SUNWSMS/SMS1.4.1/hostobjs/pcilpost.elf
/opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.flash
/opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.sym
/opt/SUNWSMS/SMS1.4.1/hostobjs/wiblpost.elf

Problem Description:

4683268 SC POST should reset M48T59 watchdog at boot
4911531 SC drifts time of about 1 to 2 seconds
4984203 Frame fan tray and RTS status are not logged
5006810 Domain level POST need to handle failed CPUs(master/slave) effectively
5009856 Implement new Vcore setting for Jaguar 3.x
5011320 showboards displays invalid Cpu Mask for Jaguar 3.0
5027547 OBP needs to check for domain keyswitch state before dropping to OK prompt
5034739 show-post-results does not recognize Xmits IO boards
5036321 RFE to the SCAPP command "sepromupdate" with a new option
5042636 Faulty system board causes NullPointerException and causes an impression that se
5049265 SC hangs at Boot with virgin U2106
5051257 mem2 /N0/SB4/P3/Cx timeout, has no hearbeat, not responding
5051422 SCApp needs to support JG3.1 and JG2.4
5062510 DomainBufferWriter thread error
5065337 Reset of Domain causes CHS disable board.
5068391 postTestList may be null during startCpu/stopCpu
5083664 backout changes for bug#5060748 which can cause ssh disabled.
 
(from 117772-01)
 
4934890 ScApp 5.15.X intermittently loses network connectivity
4982034 Ecache tag ecc err test needs to handle THCE
4987176 panic trying to lock ISM page that isn't there
4988128 CPU Time-out (TO) from system bus during POST is not evaluated
4993985 Interconnect fails but all FRUs are still included in the domain
4994905 functioning A184 PS are not detected and acknowledged as powered on
4997043 "interrupt: panic:netJobAdd: ring buffer overflow!" w/o any issues from tNetTask
5010205 POST support for 1200 MHz USIV processors
5015488 rtos workspace structure considered harmful
5029856 PS failure caused I2C problems with other FRUs.
5030395 Serengeti POST does not use new FPROM Access Timing during domain level tests
5031658 Need to handle setBytes failure when write log messages to the persistent log
5034767 regression test stopper: POST fails SB0 and excludes it
5035293 Jar's Manifest isn't treated properly by SC JVM
5042076 setk on failed to standby mode

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-9 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
        example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
 
Updating the FPROMs on all System Boards and Dual CPU Boards is
required to complete the installation of the SUNWSMSlp patch.
All FPROMs on all of these boards must be updated with the
/opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.flash image using the flashupdate
utility.  See flashupdate(1M).  
 
NOTE: This patch will be the Sun Fire 15K sgcpu.flash image with
Sun Fire 3800 - 6800 firmware level 5.17.2.

README -- Last modified date:  Thursday, October 21, 2004