Patch-ID# 117772-04 Keywords: sun fire 15k lpost 5.18.3 Synopsis: SMS 1.4.1: lpost 5.18.3 Date: Jun/08/2005 Install Requirements: See Special Install Instructions Solaris Release: 8 9 SunOS Release: 5.8 5.9 Unbundled Product: System Management Services Unbundled Release: 1.4.1 Xref: Topic: SMS 1.4.1: Relevant Architectures: sparc BugId's fixed with this patch: 4683268 4690339 4911531 4934890 4982034 4984203 4987176 4988128 4993985 4994905 4997043 5006810 5009856 5010205 5010772 5011320 5015488 5027547 5029856 5030395 5031658 5034739 5034767 5035293 5036321 5042076 5042636 5049265 5051257 5051422 5058313 5062510 5065337 5068391 5083664 5091506 5093903 5099206 6189121 6190958 6193290 6269048 Changes incorporated in this version: 6269048 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /opt/SUNWSMS/SMS1.4.1/hostobjs/caged_pcilpost.elf /opt/SUNWSMS/SMS1.4.1/hostobjs/explpost.elf /opt/SUNWSMS/SMS1.4.1/hostobjs/pcilpost.elf /opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.flash /opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.sym /opt/SUNWSMS/SMS1.4.1/hostobjs/wiblpost.elf Problem Description: 6269048 MICRON DIMM Boot Up Failure (from 117772-03) 4690339 domain error isolation CM_EACK in C accompanied by ConsolePortError in D. 5010772 Jasper320 HBA not working in a Starcat/XMITS 5v slot 5058313 takes a long time to synchronize failover status after "setfailover force" 5091506 6800 System fails to boot with 6 JAG's loaded with 2g memory config. 5093903 SIGBUS error occurred during multiple showenvironment commands. 5099206 Seprom addRecord errors are not actionable 6189121 REGRESSION: inventory not showing the correct "powered on" time 6190958 Change Vcore voltage from 1.225 to 1.25 volts for Jag 3.x 6193290 V1280, 5.18.0/5.17.3 service mode contains engineering mode only commands. (from 117772-02) 4683268 SC POST should reset M48T59 watchdog at boot 4911531 SC drifts time of about 1 to 2 seconds 4984203 Frame fan tray and RTS status are not logged 5006810 Domain level POST need to handle failed CPUs(master/slave) effectively 5009856 Implement new Vcore setting for Jaguar 3.x 5011320 showboards displays invalid Cpu Mask for Jaguar 3.0 5027547 OBP needs to check for domain keyswitch state before dropping to OK prompt 5034739 show-post-results does not recognize Xmits IO boards 5036321 RFE to the SCAPP command "sepromupdate" with a new option 5042636 Faulty system board causes NullPointerException and causes an impression that se 5049265 SC hangs at Boot with virgin U2106 5051257 mem2 /N0/SB4/P3/Cx timeout, has no hearbeat, not responding 5051422 SCApp needs to support JG3.1 and JG2.4 5062510 DomainBufferWriter thread error 5065337 Reset of Domain causes CHS disable board. 5068391 postTestList may be null during startCpu/stopCpu 5083664 backout changes for bug#5060748 which can cause ssh disabled. (from 117772-01) 4934890 ScApp 5.15.X intermittently loses network connectivity 4982034 Ecache tag ecc err test needs to handle THCE 4987176 panic trying to lock ISM page that isn't there 4988128 CPU Time-out (TO) from system bus during POST is not evaluated 4993985 Interconnect fails but all FRUs are still included in the domain 4994905 functioning A184 PS are not detected and acknowledged as powered on 4997043 "interrupt: panic:netJobAdd: ring buffer overflow!" w/o any issues from tNetTask 5010205 POST support for 1200 MHz USIV processors 5015488 rtos workspace structure considered harmful 5029856 PS failure caused I2C problems with other FRUs. 5030395 Serengeti POST does not use new FPROM Access Timing during domain level tests 5031658 Need to handle setBytes failure when write log messages to the persistent log 5034767 regression test stopper: POST fails SB0 and excludes it 5035293 Jar's Manifest isn't treated properly by SC JVM 5042076 setk on failed to standby mode Patch Installation Instructions: -------------------------------- For Solaris 2.0-2.6 releases, refer to the Install.info file and/or the README within the patch for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. For Solaris 7-9 releases, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/104945-02 The following example removes a patch from a standalone system: example# patchrm 104945-02 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- This lpost patch requires SMS1.4.1 hpost patch 117371-08 or later. Updating the FPROMs on all System Boards and Dual CPU Boards is required to complete the installation of the SUNWSMSlp patch. All FPROMs on all of these boards must be updated with the /opt/SUNWSMS/SMS1.4.1/hostobjs/sgcpu.flash image using the flashupdate utility. See flashupdate(1M). README -- Last modified date: Wednesday, June 8, 2005