Patch-ID# 117921-02
Keywords: gds gds_monitor gds_probe gds_update gds_validate
Synopsis: Sun Cluster 3.1: Generic Data Service Patch for Solaris 9_x86
Date: Nov/08/2004


Install Requirements: Install in Single User Mode                      
                      Reboot after installation                      
                      
Solaris Release: 9_x86

SunOS Release: 5.9_x86

Unbundled Product: Sun Cluster

Unbundled Release: 3.1

Xref: 

Topic: Sun Cluster 3.1: Generic Data Service Patch for Solaris 9_x86

Relevant Architectures: i386

BugId's fixed with this patch: 4941860 4985052 4985068 4985103 5000401 5010635

Changes incorporated in this version: 4941860 4985052 4985068 4985103 5000401 
5010635

Patches accumulated and obsoleted by this patch: 117969-01

Patches which conflict with this patch: 

Patches required with this patch: 117953-01 or greater

Obsoleted by: 

Files included with this patch: 

/opt/SUNWscgds/bin/gds_monitor_check
/opt/SUNWscgds/bin/gds_monitor_start
/opt/SUNWscgds/bin/gds_monitor_stop
/opt/SUNWscgds/bin/gds_probe
/opt/SUNWscgds/bin/gds_svc_start
/opt/SUNWscgds/bin/gds_svc_stop
/opt/SUNWscgds/bin/gds_update
/opt/SUNWscgds/bin/gds_validate
/opt/SUNWscgds/etc/SUNW.gds

Problem Description:

This revision is generated to include the dependency on patch 117953-01.
 
(from 117921-01)
 
  This revision is generated to accumulate feature point patch 117969-01.
 
(from 117969-01)
 
4941860 change tunability of some ex. properties to WHEN_DISABLED in GDS
4985052 gds doesn't publish events for some error cases
5010635 GDS must cache the value of probe_command
4985068 gds: some event messages are logged in wrong file
4985103 gds publishes incorrect events when log_level is set to ERR
5000401 Incorrect resource status when Failover_mode is set to RESTART_ONLY or LOG_ONLY

Patch Installation Instructions:
--------------------------------
 
There are three (3) possible procedures for installing patches on Sun
Cluster 3.1.  The proper method to use and any additional instructions,
for this patch are specified below in the "Special Install Instructions"
section.
 
Refer to the chapter entitled "Patching Sun Cluster Software and
Firmware" in the "Sun Cluster 3.1 System Administration Guide" for a
description of the different install processes and instructions on how
to install Sun Cluster 3.1 patches.
 
Refer to the man pages for instructions on using 'patchadd' and
'patchrm' scripts provided with Solaris, to install and remove patches.

Special Install Instructions:
-----------------------------
 
Install this patch using the patch install procedure for a "Rebooting
Patch (Node)" as described in the "Patching Sun Cluster Software and
Firmware" chapter of the "Sun Cluster 3.1 System Administration Guide".

README -- Last modified date:  Monday, November 8, 2004