Patch-ID# 118711-01
Keywords: pgx m64 driver window config
Synopsis: SunOS 5.10: M64 Graphics Patch
Date: Apr/26/2005


Install Requirements: Reboot after installation                      
                      
Solaris Release: 10

SunOS Release: 5.10

Unbundled Product: 

Unbundled Release: 
       NOTE: This patch may contain one or more OEM-specific platform ports.
             See the appropriate OEM_NOTES file within the patch for
             information specific to these platforms.
             DO NOT INSTALL this patch on an OEM system if a corresponding
             OEM_NOTES file is not present (or is present, but instructs not
             to install the patch), unless the OEM vendor directs otherwise.

Xref: 

Topic: 

Relevant Architectures: sparc.sun4u

BugId's fixed with this patch: 4950414

Changes incorporated in this version: 4950414

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/usr/openwin/server/modules/ddxSUNWm64.so.1

Problem Description:

4950414 Line drawing in Mentor Graphics app on M64 is inconsistent

Patch Installation Instructions:
-------------------------------- 
 
        For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
        the README within the patch for instructions on using the generic
        'installpatch' and 'backoutpatch' scripts provided with each patch. 
 
        For Solaris 7-10 releases, refer to the man pages for instructions on
        using 'patchadd' and 'patchrm' scripts provided with Solaris.
        Any other special or non-generic installation instructions should be
        described below as special instructions.  The following example
        installs a patch to a standalone machine:
 
                example# patchadd /var/spool/patch/104945-02
 
        The following example removes a patch from a standalone system:
 
                example# patchrm 104945-02
 
        For additional examples please see the appropriate man pages.

Special Install Instructions:
----------------------------- 
 
When both a PGX64 and an Emulex card are installed in the system, a panic 
may occur with a PCI SERR" error displayed on the console. This panic occurs 
when the window system starts.  This problem is described in bugs 4514116 
and 4492263.
 
Workaround for this problem:
 
  Insert the PGX64 graphics card and the Emulex card into separate PCI buses. 
 
Resolution for this problem:
 
  Upgrade Schizo ASIC to version 2.4 or later. This is done by replacing 
  the motherboard.  The version of Schizo ASIC being used is determined 
  from the output of 'prtdiag -v'. 
 
  Example output:
                     Port
  Model     ID  Status Version
  -------- ---- ------ -------
  Schizo    8     ok      4   
 
  The "Port Version" maps to the Schizo revision thus:
    4 = Schizo 2.2
    5 = Schizo 2.3
    6 = Schizo 2.4
    7 = Schizo 2.5
 
For more information please consult SRDB *ID74277*
 
After installing this patch, reboot the system to load the newly
installed driver.

README -- Last modified date:  Tuesday, April 26, 2005