Patch-ID# 118711-02

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: pgx m64 driver window config
Synopsis: SunOS 5.10: M64 Graphics Patch
Date: Aug/19/2005


Install Requirements: Reboot after installation, an alternative may be in Special Install Instructions                      
                      
Solaris Release: 10

SunOS Release: 5.10

Unbundled Product: 

Unbundled Release: 

Xref: 

Topic: SunOS 5.10: M64 Graphics Patch
       *********************************************************************
       NOTE: This patch may contain one or more OEM-specific platform ports.
             See the appropriate OEM_NOTES file within the patch for
             information specific to these platforms.
             DO NOT INSTALL this patch on an OEM system if a corresponding
             OEM_NOTES file is not present (or is present, but instructs not
             to install the patch), unless the OEM vendor directs otherwise.
       *********************************************************************

Relevant Architectures: sparc.sun4u

BugId's fixed with this patch: 4950414 6269998

Changes incorporated in this version: 6269998

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/usr/openwin/server/modules/ddxSUNWm64.so.1

Problem Description:

6269998 Xsun fails to start with depth set to 32
 
(from  118711-01)
 
4950414 Line drawing in Mentor Graphics app on M64 is inconsistent

Patch Installation Instructions:
-------------------------------- 
 
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch. 
 
For Solaris 7-10 releases, refer to the man pages for instructions 
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should 
be described below as special instructions.  The following example
installs a patch to a standalone machine:
 
       example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
       example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
----------------------------- 
 
When both a PGX64 and an Emulex card are installed in the system, a panic 
may occur with a PCI SERR" error displayed on the console. This panic occurs 
when the window system starts.  This problem is described in bugs 4514116 
and 4492263.
 
Workaround for this problem:
 
  Insert the PGX64 graphics card and the Emulex card into separate PCI buses. 
 
Resolution for this problem:
 
  Upgrade Schizo ASIC to version 2.4 or later. This is done by replacing 
  the motherboard.  The version of Schizo ASIC being used is determined 
  from the output of 'prtdiag -v'. 
 
  Example output:
                     Port
  Model     ID  Status Version
  -------- ---- ------ -------
  Schizo    8     ok      4   
 
  The "Port Version" maps to the Schizo revision thus:
    4 = Schizo 2.2
    5 = Schizo 2.3
    6 = Schizo 2.4
    7 = Schizo 2.5
 
For more information please consult SRDB *ID74277*
 
After installing this patch, reboot the system to load the newly 
installed driver.

README -- Last modified date:  Friday, August 19, 2005