Patch-ID# 119242-01 NOTE: *********************************************************************** READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE. *********************************************************************** Keywords: sun fire v480 v490 Synopsis: Hardware/PROM: Sun Fire V480 / V490 Flash PROM Update Date: Oct/24/2005 Install Requirements: Additional instructions may be listed below Solaris Release: 8 9 10 SunOS Release: 5.8 5.9 5.10 Unbundled Product: Hardware/PROM Unbundled Release: OBP 4.18.2,POST 4.18.2,OBDIAG 4.18.2 Xref: Topic: Relevant Architectures: sun fire v480 / v490 BugId's fixed with this patch: 4826050 5064141 5093266 6173881 6206729 6210939 6216428 6231224 6234769 6235884 6243243 6246407 6246421 6247508 6247511 6255271 6256336 6256337 6256341 6257778 6257800 6267632 6273119 6273213 6276317 6284318 6286277 6303388 BugIds Changes incorporated in this version: Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: 817-6957-10.pdf, unix.flash-update.README flash-update-SunFire480-latest, flash-update-SunFire480-old, flash-update-SunFire480-oldest unix.flash-update.SunFire480.sh, README.119242-01, copyright, 802-3233-25.ps, Problem Description: 4826050 RED_State exception does not trigger POST, OBDiag when error-reset trigger set 5064141 post does not get triggered when the triggers are set to error-reset 5093266 Need POST support for Panther 6173881 Obdiag exits and prevents user from starting program again when hardware failure detected 6206729 "qas" binary is to be removed from the post gate and be called from the compiler directory 6210939 OBP Needs to get actual frequency from POST when IO slot is in PCIX mode 6216428 Move Starcat specific code from common PCI code into Starcat PCI code 6231224 system hang up when enter ":c" to leave kadb prompt and get back into UNIX mode. 6234769 "post" command does not work after dropping to "ok" prompt from OS after a "break" 6235884 "NESTED ERRORs, going interactive forcing misaligned trap" seen after probing devices 6243243 OBP hangs on E25K after enable-reentry failure 6246407 TFTP boot on WANboot capable proms hangs if duplicate TFTP data blocks are received 6246421 Limit number of TFTP timeout messages during boot 6247508 system-tick-speed and the alarm interval need to be updated to correct value 6247511 support reentrancy in the memory list management 6255271 (March 05) release of ENxS and Netra 210/240 motherboad not supported by latest obp. 6256336 Need TH2 timing values for 10:1 1500Mhz support 6256337 Need to fix POST poll_mc_timing routine to support multiple timing configs 6256341 Disable the POST FPU Block register test for Panther CPUs 6257778 Enchance Panther CPU error handling 6257800 SeSi PMU update 6267632 .version command from ok prompt will print out the wrong POST version (POST 4.49.48) 6273119 SeSi PMU update 6273213 Need POST dev complete putback for Panther 6276317 Remove Xmits 3.0 workaround from fcode driver 6284318 First boot to Solaris will panic after a POR with 1200MHz modules installed. 6286277 prtdiag showes wrong bus freq. for c5 slots 6303388 SeSi new motherboard part numbers for Flash Update Patch Installation Instructions: =============================== Intro ----- This README is intended for users who wish to upgrade the firmware in their Sun Fire V480 / V490. Summary of the Patch Installation Process: ------------------------------------------ The installation shall comprise of the following steps 1) Determine the system's current Flash PROM firmware revision. 2) Compare the current Flash PROM firmware revision with the available or latest Flash PROM firmware revisions. 3) If the current Flash PROM firmware revision is lower than the latest available firmware revision in this patch, then proceed to the next step. If NOT, STOP: DO NOT CONTINUE. 4) Prepare the system for the Flash PROM update 5) Running the Flash PROM Utility 6) Verifying successful Flash PROM Update 7) Restoring the system 8) Resume operations Patch Installation instructions (in detail): ============================================ The required steps are explained in greater detail below. 1) Determine the System's Current Firmware Revisions ------------------------------------------------- While the OS is running the following command may be used to determine the current system firmware revisions; /usr/sbin/prtconf -V or /usr/platform/sun4u/sbin/prtdiag -v | grep OBP The firmware revisions may also be determined from the PROM monitor's "ok" prompt with the following command; .version 2) Compare the current Flash PROM firmware revision with the available or latest Flash PROM firmware revisions. Compare the output of the OBP line in the "prtdiag -v" or "prtconf -V" output. Find the revision number and compare with the revision on the entries below that of the "flash-update-SunFire480-latest" line Available Firmware Revisions ---------------------------- flash-update-SunFire480-latest: OBP 4.18.2 2005/06/30 07:52 Sun Fire 4XX Sun Fire[TM] V480/V490 POST 4.18.2 2005/06/30 08:13 OBDIAG 4.18.2 2005/06/30 08:09 flash-update-SunFire480-old: OBP 4.17.1 2005/04/11 14:27 Sun Fire 4XX Sun Fire[TM] V480/V490 POST 4.17.1 2005/04/11 14:37 OBDIAG 4.17.1 2005/04/11 14:35 flash-update-SunFire480-oldest: OBP 4.15.6 2005/01/06 04:24 Sun Fire 4XX Sun Fire[TM] V480/V490 POST 4.15.6 2005/01/06 10:48 OBDIAG 4.15.6 2005/01/06 04:30 3) Is the UPGRADE NECESSARY? If the current Flash PROM revision matches the version numbers given under the flash-update-SunFire480-latest line, then STOP Here. This UPGRADE IS NOT NECESSARY. If the current Flash PROM firmware revision is lower than the latest firmware revision in this patch, then proceed to the next step. 4) Preparing the System --------------------- a) As root, copy the latest "flash-update" files from the directory containing the patch to the root directory as follows: # cp flash*latest / # chmod 755 /flash-update* In order to boot the binary, it must be located within the root partition. If it is not already located within the root partition then move it to /. If the binary is already located elsewhere within the root partition then note the exact filepath so that the binary can be booted later. b) As root, exit the OS such that the system returns to the PROM's "ok" prompt: # halt ok c) Jumper J3003 is factory-set so that the flash PROM is write-enabled. There is no need to switch the jumper before flash updating; however, you must ensure that the keyswitch is in the Power-on or Diagnostics position. When the key switch is in the locked position the flash PROM is write protected. 5) Running the Flash Update Utility -------------------------------- a) Power on the system Wait for the PROM's banner to appear, and then b) Use the Stop-A keys (or Break key, if running from a serial line) to abort the auto-boot sequence. ** NOTE ** If the flash update completes normally then the values contained within the system's Non-Volatile RAM (NVRAM) configuration variables will be retained. However, if the update process is some- how interrupted then it is possible that any non-default values contained in NVRAM will be lost. For this reason it is recommended that you note down on paper the contents of any NVRAM configuration variable which has been customized so that they may be manually restored at a later time, if necessary. (Use the PROM's "printenv" command to list the variables and their values.) c) The system should now display the PROM monitor's "ok" prompt. Now boot the Flash update utility as given below: CAUTION: Do not boot/run revisions lower than the latest unless you are absolutely sure that that is what you want to do! ok boot disk /flash-update-SunFire480-latest NOTE: If your system's boot device is not "disk" then you will have to specify the appropriate devalias (e.g. disk2). If the binary is located in a location other than / then provide the entire filepath after the boot device. Answer the questions as prompted by the utility. +++++++++++++++++++++ example Flash update follows ++++++++++++++++++++++++ ++++++++ Note that this is an example only. Much of the information ++++++ ++++++++ which is displayed by your system will be different from ++++++ ++++++++ what is shown below. ++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Standalone Flash PROM Update Utility, Rev. 2.8 Ultra(tm) 1 Ultra(tm) 2 Ultra(tm) 5/10 Ultra(tm) 30 Ultra(tm) 60 / E220R Ultra(tm) 80 / E420R Ultra(tm) Enterprise(tm) 250 Ultra(tm) Enterprise(tm) 450 Sun Blade(tm) 100 Sun Blade(tm) 1000 Sun Fire (tm) 280R Sun Fire (tm) V480R Sun Fire (tm) V880 Netra(tm) T4 This utility allows you to interactively update the firmware revisions in specific system Flash PROM components. Type h for help, q to quit, Return or Enter to continue: Every precaution should be taken to prevent the loss of system power during the Flash PROM programming process! Type h for help, q to quit, Return or Enter to continue: Firmware Release(s) Firmware Release(s) Currently Existing in the System Available for Installation / Install? ---------------------------------- ------------------------------------------- OBP 4.5.6 2002/01/04 12:30 OBP 4.6.3 2002/05/28 09:09 no POST 4.5.6 2002/01/04 15:54 POST 4.6.2 2002/05/21 10:41 no Type sa if you wish to select all available firmware releases for installation. Type h for help, quit to exit, or cont to continue: sa Firmware Release(s) Firmware Release(s) Currently Existing in the System Available for Installation / Install? ---------------------------------- ------------------------------------------- OBP 4.5.6 2002/01/04 12:30 OBP 4.6.3 2002/05/28 09:09 YES POST 4.5.6 2002/01/04 15:54 POST 4.6.2 2002/05/21 10:41 YES Type sa if you wish to select all available firmware releases for installation. Type h for help, quit to exit, or cont to continue: cont The Flash programming process is about to begin. Type h for help, q to quit, Return or Enter to continue: Erasing the top half of the Flash PROM. Programming OBP into the top half of the Flash PROM. Verifying OBP in the top half of the Flash PROM. Erasing the bottom half of the Flash PROM. Programming OBP into the bottom half of Flash PROM. Verifying OBP in the bottom half of the Flash PROM. Erasing the top half of the Flash PROM. Programming POST into the top half of Flash PROM. Verifying POST in the top half of the Flash PROM. Programming was successful. Resetting ... +++++++++++++++++++++ example Flash update ends ++++++++++++++++++++++++++ Once the PROM's banner reappears then use the Stop-A keys (or Break key, if running from a serial line) to abort the auto-boot sequence if the system begins to boot. 6) Verifying successful Flash PROM Update Verify from the results of the .version command that the OBP version matches the OBP version given above under the flash-update-SunFire480-latest entry in Step 2. 7) Resume operations a) Allow the system to auto-boot, or issue the boot command for your environment as necessary. b) Once the system has rebooted you may wish to remove the Flash Update binaries and documents since they will no longer be needed. # rm /flash-update* c) Remember to remove the files from their original location if they were not extracted directly into the root directory. *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*- Special Install Instructions: ----------------------------- NOTE 1: If you have the frame buffer Raptor GFXP -04 REV 50 (part 370-3753-04), you *must* install patch 110126-03 to upgrade the FCode in the card **BEFORE** you can do the firmware update. Revisions -05 and up of the frame buffer are not affected. Failure to install the frame buffer patch (110126-03) will cause "FATAL" resets after the firmware update. NOTE 2: This utility is *not* OS-dependent. The list of releases shown under the "Solaris Release" and "SunOS Release" sections may not be complete: The absence of a valid Solaris Release or SunOS Release from the lists above does not preclude the installation of this patch against the hardware. NOTE 3: If you are upgrading your system from 4.2.X you will need to modify the NVRAM variable, diag-script. OBP version 4.4.7 introduced a change in the underlying keyvalue assigned to the script keywords which will result in the value of diag-script being changed. After the firmware upgrade, but prior to booting, please execute the following at the "ok" prompt: ok setenv diag-script normal ok reset-all This ensures that the system will run the "normal" set of diagnostic scripts on all subsequent system resets. NOTE 4: Modifications to Diagnostic Operation This released version of OpenBoot enables diagnostic execution for all power-on and error reset events, **as the new system default. **To implement this new policy, behavioral changes to diagnostic controls were made to simplify the enabling of diagnostics and controlling the level and verbosity of diagnostics. A new feature includes a Sun-prescribed mode of diagnostic execution, which overrides user-defined settings. This mode provides service personnel with an easy method by which to invoke a predictable execution of diagnostics. The new standard (default) configuration will increase system boot time ( measured from power-on to the 'ok>' prompt ) and messaging ( varies by system configuration ) for all 'power-on-reset' and OBP detected 'error-reset' events. Increased boot time and messaging is largely due to the execution of diagnostics. Automated System Recovery (ASR), a form of restoration, is implemented at the firmware layer and increases overall system availability when diagnostics are enabled. For more specific details regarding these OBP changes, reference the pdf document; "OpenBoot[tm] PROM Enhancements for Diagnostic Operation", included within this patch ( part 817-6957, July 2004 ). NOTE 5: WANboot Documentation Instructions for installing systems over a WAN is provided in Chapters 41-46 of the "Solaris 9 9/04 Installation Guide" from the "Solaris 9 9/04 Release and Installation Collection". This document is accessible at: http://docs.sun.com/db/doc/817-5768 The quick link to the WANboot specific documentation is: http://docs.sun.com/db/doc/817-5768/6ml70g5vj?a=view The list of arguments processed by the WAN boot capable network boot support package is provided in the boot(1M) man page in the "man pages section 1M: System Administration Commands" section of the "Solaris 9 9/04 Reference Manual Collection". A quick link to this man page is: http://docs.sun.com/db/doc/817-3937/6mjgeafkc?a=view Security keys used for WANboot can be installed using the "set-security-key" command at the OBP's command prompt. Description of usage is provided in the monitor(1M) man page in the "man pages Section 1M: System Administration Commands" section of the (Solaris 9 09/04 Reference Manual Collection) A quick link to the monitor(1M) man page is: http://docs.sun.com/db/doc/817-3937/6mjgeafu2?a=view ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** * PLEASE READ THE INSTRUCTIONS CAREFULLY AND ENTIRELY. PLEASE FOLLOW THE INSTRUCTIONS EXACTLY AS THEY ARE STATED. * FAILURE TO FOLLOW INSTRUCTIONS COULD EITHER RESULT IN A DEFECTIVE BOARD OR UNSUCCESSFUL FLASH PROM UPDATE. * THIS IS NOT A STANDARD PATCH in that it does not use the installpatch and backoutpatch scripts. * THIS PATCH CANNOT BE INSTALLED ON AN ONLINE OPERATING SYSTEM BECAUSE THE INSTALL INSTRUCTIONS REQUIRES THAT THE SYSTEM BE BROUGHT DOWN. BE SURE TO SCHEDULE DOWN TIME TO INSTALL THIS PATCH. * Installation of the firmware included with this patch does NOT require any hardware changes if the Flash update completes normally. * PLEASE REVIEW NOT ONLY THIS README BUT ALSO ADDITIONAL DOCUMENTATION GIVEN. The file "802-3233-xx.ps" (where xx stands for the latest numeric revision) is a PostScript copy of the "Sun Flash PROM Guide for Workstations and Workgroup Servers - Standalone Version", which provides the following; (i) Emergency instructions in the unlikely event that the Flash update should fail. Note, however, that The Programming Guide was originally written for a user who is running the Flash PROM update utility from a bootable CDROM, and thus it will not contain the proper boot commands for installation of this patch. Also note that the instructions in the document for installing packages are not valid for this patch. ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** README -- Last modified date: Monday, October 24, 2005