Patch-ID# 119443-05

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: sd fdisk luns io
Synopsis: SunOS 5.9_x86: sd patch
Date: Aug/29/2006


Install Requirements: Reboot immediately after patch is installed                      
                      Install in Single User Mode                      
                      
Solaris Release: 9_x86

SunOS Release: 5.9_x86

Unbundled Product: 

Unbundled Release: 

Xref: This patch available for SPARC as patch 113277

Topic: SunOS 5.9_x86: sd patch

Relevant Architectures: i386

BugId's fixed with this patch: 4808352 4886293 5023670 5036894 6216135 6230146 6249580

Changes incorporated in this version: 6230146

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 117172-17 (or greater)

Obsoleted by: 

Files included with this patch: 

/kernel/drv/sd
/usr/include/sys/scsi/targets/sddef.h

Problem Description:

6230146 sd should export pm-components property for sata drives
 
(from 119443-04)
 
5036894 Solaris target disk driver does gratuitous resets during detach.
4808352 memory leak in sd_register_devid()
 
(from 119443-03)
 
4886293 driver config files need an "exclude" option.
6216135 vold mount takes about 2 minutes with Toshiba DVD ROM SD-M1711
 
(from 119443-02)
 
5023670 V440 onboard RAID does not work with SunCluster 3.x
 
(from 119443-01)
 
6249580 x86 needs to support large LUNs

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-10 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
       example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
       example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
 
NOTE 1:  Reboot the system after patch installation.
 
NOTE 2:  KNOWN PROBLEMS AND LIMITATIONS
 
         When applying this patch to a system where a disk has already been formatted
         and only part of the disk was available (bug 5042195) the existing Solaris
         label *MUST* be cleared in order for the disk to be fully utilized.  If this
         is not done then the existing label will be used and that disk configuration
         from that label will continue to limit the amount of disk space that can be
         used for that disk.
 
         BE SURE TO BACKUP ANY DATA YOU WISH TO RETAIN BEFORE PROCEEDING FURTHER!
 
         For an unpatched system it is best to boot into single user mode with the ITU
         loaded.  See examples above for how to do that.
 
         To clear the entire disk you can use this command (fill in the '?' spots with
         the values for the disk you are dealing with.  If unsure, run 'format' to see
         what disks you have in your system and their paths:
 
         dd if=/dev/zero of=/dev/rdsk/c?t?d?p0 bs=1024k count=10
 
         The example above will wipe out the entire fdisk table and the first 10MB of
         data on the disk.
 
         For a disk with multiple fdisk partitions you may wish to preserve the other
         fdisk partitions and only wipe out the Solaris partition.  This can be done
         by only clearing the Solaris partition, in a fashion similar to how you can
         clear the fdisk information.  First use fdisk, or the fdisk command within
         format, to determine which partition is your Solaris partition.  The fdisk
         partitions are numbered 1 to 4, so simply count from the top down on the
         display of partitions to determine which one is the Solaris fdisk partition.
         You can then clear that partition with a command like this (in this example
         the Solaris partition is number 2):
 
         dd if=/dev/zero of=/dev/rdsk/c?t?d?p2 count=?????
 
         Note that you should use the number for the length of the fdisk partition for
         the argument to count.  This will take longer than just wiping out the fdisk
         table as in the first example, because it writes the entire partition one
         block at a time, but that is needed to destroy all the backup labels so they
         will not be used.

README -- Last modified date:  Tuesday, August 29, 2006