Patch-ID# 121091-03 NOTE: *********************************************************************** READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE. *********************************************************************** Keywords: sun fire 15k lpost 5.19.6 Synopsis: SMS 1.5: lpost 5.19.6 Date: May/31/2006 Install Requirements: See Special Install Instructions Solaris Release: 8 9 SunOS Release: 5.8 5.9 Unbundled Product: System Management Services Unbundled Release: 1.5 Xref: Topic: SMS 1.5: Relevant Architectures: sparc BugId's fixed with this patch: 6241193 6273264 6277490 6277542 6278585 6281990 6287644 6287893 6297086 6309268 6311761 6313503 6314358 6316095 6316530 6316541 6319195 6319704 6321138 6323420 6325921 6326613 6329943 6330120 6330681 6353053 6354226 6356684 6378865 6379321 Changes incorporated in this version: 6297086 6378865 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /opt/SUNWSMS/SMS1.5/hostobjs/caged_pcilpost.elf /opt/SUNWSMS/SMS1.5/hostobjs/explpost.elf /opt/SUNWSMS/SMS1.5/hostobjs/pcilpost.elf /opt/SUNWSMS/SMS1.5/hostobjs/sgcpu.flash /opt/SUNWSMS/SMS1.5/hostobjs/sgcpu.sym /opt/SUNWSMS/SMS1.5/hostobjs/wiblpost.elf Problem Description: 6297086 Single-bit error on DECC line (DIMM signal) w/ post-tolerate-ce=true indicts processor 6378865 Xmit POST initiates Short PCI Reset T_rst<1ms (from 121091-02) 6241193 core power write failed 6278585 Memory Addressing test should support tolerate_mem_ce 6281990 mem dimm tests indict wrong components 6309268 Panther: Need a cell bit adjacency test for L2$-data and L3$-tags 6316095 Problems in tolerate_mem_ce implementation 6323420 Panther L2$ ECC failures during POST incorrectly FAIL Ecache DIMMs 6326613 ipmp fails on lw8 with xmits 3.1 assemblies 6329943 mpt driver fails to attach to Jasper320 on LW8 PCI system after max POST 6330120 subcr 2130757 POST should identify correct SRAM/DIMM when ECC bit fails 6330681 Need to correct lint error introduced by 6319704 putback 6353053 false VCMON failures due to ramping system load 6354226 POST can attach FRUs which failed interconnect test 6356684 RFE 6309268 regression: L3$ Tags test failure for certain 6379321 IB_SSC fails PCI IO Controller Functional Tests during POST (from 121091-01) 6273264 Solaris 10/POST not giving correct Panther E$ address (AFAR) on failure 6277490 RFE: AVL-FS2 (Serengeti): Provide Diagnosis of NEW Panther CPU Errors 6277542 l3 ram test only tests 512K of the sram 6287644 Unable to Poweron a Failed Xmits3.1 I/O assembly 6287893 - RTOS 44: SC does not respond to ping but tNetTask looks running 6311761 Add support for PCI+ boards in LW8 6313503 "bootmode reset_nvram" should not change security settings in obp 6314358 IdProm.java generates hostids; it shouldn't. 6316530 SERD tunables for CPU events are not consisten between s9u8, s10u1fma, and scapp 6316541 sc cpu de needs to handle l3/l2 cache errors on non-FMA domains so as to not cause proc indictment -v src/ 6319195 - RTOS 45: lw8.c doesn't follow proper MAC address and hostid conventions 6319704 Panic seen on Serengeti with 5.19.1 firmware after post level of init. 6321138 ho.stid is 'ffffffff' in 5.20.0 build 3 6325921 Showboard output for Panther board intermittently shows proc at 1510MHz Patch Installation Instructions: -------------------------------- For Solaris 2.0-2.6 releases, refer to the Install.info file and/or the README within the patch for instructions on using the generic 'installpatch' and 'backoutpatch' scripts provided with each patch. For Solaris 7-9 releases, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/104945-02 The following example removes a patch from a standalone system: example# patchrm 104945-02 For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- Updating the FPROMs on all System Boards and Dual CPU Boards is required to complete the installation of the SUNWSMSlp patch. All FPROMs on all of these boards must be updated with the /opt/SUNWSMS/SMS1.5/hostobjs/sgcpu.flash image using the flashupdate utility. See flashupdate(1M). README -- Last modified date: Monday, July 10, 2006