Patch-ID# 121692-01

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: sun fire v215/ v245
Synopsis: Hardware/PROM: Sun Fire V215 / V245 Flash PROM Update
Date: Oct/16/2006


Install Requirements: None                      
                      
Solaris Release: 9 10

SunOS Release: 5.9 5.10

Unbundled Product: Hardware/PROM

Unbundled Release: OBP 4.22.18, POST 4.22.18, OBDIAG 4.22.18

Xref: 

Topic: 

Relevant Architectures: sparc

BugId's fixed with this patch: 6364139 6376657 6379979 6380442 6381084 6381115 6381242 6381385 6383658 6390526 6392539 6393492 6396519 6396528 6396533 6396540 6396546 6400408 6404798 6406142 6407889 6411069 6414799 6418658 6423803 6436300 6438649 6441770 6444152 6447320 6447326 6450624 6454640

Changes incorporated in this version: 

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

flash-update-SunFire245
unix.flash-update.SunFire245.sh

Problem Description:

6454640 missing device_type property on ebus node.
6450624 Disable NPWR_EN on Seattle
6447326 Remove CPU speed configuration menu
6447320 Remove OBP flash-update command
6444152 Seattle Unix OBP flash update script needs to support new Seattle MB part numbers
6441770 I2C workaround for EPIC access issue
6438649 I2C contention between OBP and ALOM
6436300 netconsole gets stuck while running obdiag with base fabric interface
6423803 OBP support for dynamically programming the SAS WWID
6418658 Incorrect paths in seattle ASR
6414799 Seattle OBP needs extra guard pages for boot support
6411069 OBP PLL data writes should be consistent with POST.
6407889 Add 2UXXL support, remove 2UEXL support
6406142 PCI bridge code handles IO limit = 0 incorrectly
6404798 Host keeps on resetting when keyswitch is set to diag.
6400408 Modify RX_EQLIZR_CTL bits in Seattle Fire LPU Gigablaze Glue Config2 Register to 0000 from default
6396546 Remove pre-P1.0 hacks
6396540 Program static SAS WWID at boot time
6396533 Solaris flash-updater broken
6396528 PCI-X out of band riser card interrupts should only be created if 2UEXL or 2UEEL riser card used
6396519 OBDiag EPIC test fails
6393492 Need to enforce memory CAS latency minimum of 2.5 on DIMMS running at more than 133MHz
6392539 Volume type is being referenced instead of volume id in 1.00.39 1064 fcode
6390526 USB 2.0 Hub gets lost to OBP after Solaris EHCI driver run
6383658 Dynamic FRUID writes cause OBP MB FRUPROM reads to fail
6381385 Upgrade LSI1064 FCode to 1.00.39
6381242 Seattle platform support
6381115 mixed speed memory will not interleave in enchilada system
6381084 bootmode reset-rvram does not reset nvram variables.
6380442 Seatle_P0.1-2U: FATAL: no exception frames available, forcing misaligned trap (S#S020)
6379979 fcode: map-in of config space does not work correctly
6376657 OBP I2C Drivers should frame each unique addressed device with a START and STOP.
6364139 OBP shows "ERROR - BCM5714 device 0 missing" with pci1 is disabled.

Patch Installation Instructions:
===============================
Please refer to the Install.info file for instructions on updating
the firmware using the files included in this patch.
 
                >>> END <<<

Special Install Instructions:
 

README -- Last modified date:  Monday, October 16, 2006