Patch-ID# 124020-02

NOTE:
***********************************************************************
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
***********************************************************************

Keywords: saip, driver, sitty, saipconfig, interrupts, cms boot, man page
Synopsis: SunSAI/P 3.0: fixes and enhancements
Date: Nov/30/2006


Install Requirements: NA                      
                      
Solaris Release: 10

SunOS Release: 5.10

Unbundled Product: SPI SAI/P

Unbundled Release: 3.0

Xref: 

Topic: 

Relevant Architectures: sparc

BugId's fixed with this patch: 6374904 6388317 6476264

Changes incorporated in this version: 6476264

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

	/kernel/drv/sparcv9/saipdl
/etc/opt/SUNWconn/saip/bin/saipconfig

Problem Description:

6476264 sai/pci S10 patch fails to install
 
(from 124020-01)
6374904 sai/pci device management conflict
6388317 Unable to change the default settings for the serial ports after installing SunSAI/P V3.0 in Sol.10

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-10 releases, refer to the man pages for instructions on
using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
        example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
 
This patch must be installed in the same system that has the board installed.
For DISKLESS CLIENTS this means the patch must be installed on the client,
NOT in a client partition of the client's server.
 
After installing this patch, reboot the system to load the newly
installed driver.

README -- Last modified date:  Thursday, November 30, 2006