FRU Report |

### To Generate a Customized FRU Report

From the General Reports menu, click FRU Reports.

1. Click New Report.
2. Enter an email address in the Email text field.
3. Select one report and click Display.

- Detailed Report--displays a detailed list of FRU identifiers.
  From the detailed FRU report, you can filter the FRU report using [device type] and [FRU type] filters.

FRU Identifier | Description
--- | ---
Name | Host name
Device | Device type
FruType | Component FRU ( for example, controller, disk, loopcard)
Fru | FRU identifier number
Vendor | FRU vendor (for example, Seagate for disks)
Model | Model number
Serial | Serial number
Revision | SUNWstads package
Status | Current device status

4. Fru Summary (Health Concerns) This report only displays the frus that are not in a normal state.
5. Fru-Model Summary (by Device Name)
   Displays the FRU type, vendor name, model number, revision number, and number of FRUs per FRU type for a selected device name (for example, sp-87-t400).

6. Fru-Model Summary (by DeviceType)
   Displays the FRU type, vendor name, model number, revision number, and number of FRUs per FRU type for a selected device (for example, 6120).
7. Battery days left This reports displays all batteries sorted by the number of days before the battery needs to be replaces. This report works only on Sun T3 and Sun 6120 at the moment.
8. Temperature Report This report displays the fru temperature distribution. It can be used to isolate hot frus. The Lower and Upper Control Limit is shown to help isolation. Lower and Upper Control Limit is defined as 3 standatd deviations from the median.
9. Temperature Suppary (frus above UCL) This is a summary of the Temperature report displaying only hot frus as defined by the UCL.

See Also:

- Traffic Report
- Event Report
- Service Advisor
- Array Performance Report