%sfs_open: internal error\n
%sCannot access %s: %s\n
%sCannot open %s: %s\n
%smalloc of space for super block failed\n
%sread of super-block on %s failed: %s\n
%sread of super-block on %s failed: not enough bytes\n
%s%s is not a block or character special file\n
%ssnapshot mountpoint for %s (%s) not found\n
%smountpoint %s for %s (%s) not snapshot file system\n
%ssnapshot read of super-block on %s (%s) failed: %s\n
%ssnapshot read of super-block on %s (%s) failed: not enough bytes\n
%snot a valid vxfs file system\n
%sunrecognized vxfs version number\n
%sinvalid vxfs super-block checksum\n
%sfset_open: internal error\n
%sfileset %d not found\n
%sinode %d out of range\n
%sread failed for block %d: %s\n
%sfset_get: internal error\n
%sfileset `%s' not found\n
%sinode extent buffer allocation failed\n
%sbad ilist extent\n
%sfile system on %s has structural damage\n
%s%s wrong file type\n
%s%s not a directory\n
%smalloc of space for argument list failed\n
%sCannot deduce character device name for %s\n
libvxfs(vx_sprintf): buffer to small for format string '%s'\n
libvxfs(vx_sprintf): bad format string '%s'\n
%-10s %5d:\tASSERT(%s) failed\n
cannot open vxportal :error:%s\n
open of snapshot mountpoint %s failed:
fstatvfs of snapshot mountpoint %s failed:
snapshot mountpoint %s is not a vxfs file system
VX_GETFSOPT ioctl on snapshot mountpoint %s failed:
file system %s is not a snapshot!
special file %s doesn't match file system %s
Cannot stat %s\n
Could not find block device corresponding to %s\n
Cannot open %s for size information\n
ioctl BLKGETSIZE failed with error value %d\n
Cannot open raw device %s\n
Cannot open raw device %s\n
Cannot open raw device %s\n
RAW_GETBIND ioctl on raw device %s failed\n
No free raw device available\n
Operation not supported on Storage Checkpoint object %s\n
cannot open vxportal :error:%s\n
open of snapshot mountpoint %s failed:
fstatvfs of snapshot mountpoint %s failed:
snapshot mountpoint %s is not a vxfs file system
VX_GETFSOPT ioctl on snapshot mountpoint %s failed:
file system %s is not a snapshot!
special file %s doesn't match file system %s
cannot stat %s: %s\n
cannot determine character device for %s\n
Cannot open %s for vtoc information\n
read_vtoc failed with return value %d\n
Operation not supported on Storage Checkpoint object %s\n
open of snapshot mountpoint %s failed:
fstatvfs of snapshot mountpoint %s failed:
snapshot mountpoint %s is not a vxfs file system
VX_GETFSOPT ioctl on snapshot mountpoint %s failed:
file system %s is not a snapshot!
special file %s doesn't match file system %s
cannot stat %s: %s\n
cannot determine character device for %s\n
cannot open %s: %s\n
could not determine disk capacity of %s: %s\n
no space allocated to %s\n
not enough memory: %s\n
Operation not supported on Storage Checkpoint object %s\n
cannot set extent attributes of \"%s\"\n
cannot set extent attributes of \"%s\"\n
Cannot statvfs \"%s\"\n
Cannot getext \"%s\"\n
Cannot save extent attributes of \"%s\"\n
Cannot save extent attributes of \"%s\"\n
Cannot statvfs \"%s\"\n
Cannot statvfs \"%s\"\n
Cannot get extent info for \"%s\"\n
Cannot keep extent attributes of \"%s\"\n
Cannot keep extent attributes of \"%s\"\n
Cannot keep extent attributes of \"%s\"\n
 Cannot keep extent attributes of \"%s\"\n
Cannot keep extent attributes of \"%s\"\n
Cannot keep extent attributes of \"%s\"\n
invalid extent option \n
cannot set extent attributes of \"%s\"\n
cannot set extent attributes of \"%s\"\n
cannot statvfs \"%s\"\n
cannot getext \"%s\"\n
cannot save extent attributes of \"%s\"\n
cannot save extent attributes of \"%s\"\n
cannot statvfs \"%s\"\n
cannot statvfs \"%s\"\n
cannot get extent info for \"%s\"\n
cannot keep extent attributes of \"%s\"\n
cannot keep extent attributes of \"%s\"\n
cannot keep extent attributes of \"%s\"\n
cannot keep extent attributes of \"%s\"\n
cannot keep extent attributes of \"%s\"\n
cannot keep extent attributes of \"%s\"\n
invalid extent option\n
Filesystem              avail\n
(%-16s):  %8d kilobytes\n
(%-16s):  %8u files\n
Filesystem              ifree\n
filesystem         kbytes   used     avail    capacity  mounted on\n
(%-16s):  %8d blocks%8u files\n
%-10.32s is not a special device or directory\n
%-10.32s is not a vxfs file system\n
Cannot open %s: %s\n
Free Extents by Size\n
Cannot access %s: %s\n
statvfs() on %s failed: %s\n
(%-16s):  %8d blocks%8u files\n
                                 total:
  %8d blocks%8u files\n
Usage:\ndf [-F vxfs] [generic_options] [-o {s | snapstat}][directory | special ...]\n
cannot read iau inode for fileset %d\n
bmap failure:  iau inode %d fileset %d\n
%s not mounted as a snapshot file system\n
%s not a snapshot file system\n
Cannot open output file %s: %s\n
Usage: %s [-sv] [-p pw_file] [-u file] [-i ignlist] [-o fsetname=fileset] [file ...]\n
Cannot open %s: %s\n
%s : %s\n
 %s is neither block nor character special\n
 Out of memory\n
 BAD UID: file system = %s, inode = %u, uid = %ld\n
ignore list overflow. Recompile with larger MAXIGN\n
Cannot open %s: %s\n
 Out of memory\n
FSType %s not recognized\n
Disk size is %d\n
New size (%d blocks) beyond device capacity (%d blocks).\n
file system is already at maximum device capacity.\n
Only expansion allowed.\n
FS is dirty, run fsck first.\n
Invocation of the fsck program terminated abnormally.\nThe file system is marked bad.  Run full fsck manually.\n(e.g. fsck -F vxfs %s)\n
%s cannot stat\n
cannot determine block device for %s\n
%s is mounted, cannot extend.\n
cannot open device %s\n
%s invalid super-block\n
Usage:\n
%s [-F vxfs] [-q] [-v] [-s size] special\n
NOTE! %d pathnames only partially resolved\n
%s - %s\n
%s is neither block nor character special\n
No files were selected.\n
cannot malloc link space\n
%d files selected\n
%d link names detected\n
cannot malloc inode space\n
cannot malloc directory map space\n
cannot malloc ilist space\n
immediate directory data \"block\" list
immediate directory data \"block\" list
directory data block list
directory data block list
link space
insufficient memory for directory buffer\n
directory block %d for ino %d is bad\n
immediate directory block in ino %d is bad\n
parent chain for inode %d runs off ilist\n
parent chain for inode %d is too long\n
read failed in getblk(), %s\n
name list
name list
calloc failed in inodes()\n
-i value, %d, ignored\n
-i inumber list
program limit of %d exceeded for
\n
%s: 
Usage:\n    ff [-F vxfs] [-Ilsu] [-p prefix] [-a n] [-m n] [-c n] [-n file]\n       [-i i-node-list] [-o s] special...\n
can't specify multiple -a options\n
bad value %s for option a\n
can't specify multiple -m options\n
bad value %s for option m\n
can't specify multiple -c options\n
bad value %s for option c\n
can't specify multiple -n options\n
n option: %s\n
FSType %s not recognized\n
only one device can be specified with -o fsetname option\n
Usage:\n    ff [-F vxfs] [-Ilsu] [-p prefix] [-a n] [-m n] [-c n] [-n file]\n       [-i i-node-list] [-o s] special...\n
can't specify multiple -a options\n
bad value %s for option a\n
can't specify multiple -m options\n
bad value %s for option m\n
can't specify multiple -c options\n
bad value %s for option c\n
can't specify multiple -n options\n
n option: %s\n
FSType %s not recognized\n
only one device can be specified with -o fsetname option\n
Usage:\n    ff [-F vxfs] [-V] [-Ilsu] [-p prefix] [-a n] [-m n] [-c n] [-n file]\n       [-i i-node-list] [-o s] special...\n
 can't specify multiple -a options\n
 bad value %s for option a\n
 can't specify multiple -m options\n
 bad value %s for option m\n
 can't specify multiple -c options\n
 bad value %s for option c\n
 can't specify multiple -n options\n
 n option: %s\n
FSType %s not recognized\n
only one device can be specified with -o fsetname option\n
%s\n
expected %d inodes, only found %d inodes\n
internal error
\n  Directory Fragmentation Report\n
             Dirs        Total      Immed    Immeds   Dirs to   Blocks to\n
             Searched    Blocks     Dirs     to Add   Reduce    Reduce\n
 error processing inode list for fset %ld\n
 Directory Reorganization Statistics\n
              Dirs       Dirs      Total    Failed   Blocks    Blocks     Immeds\n
              Searched   Changed   Ioctls   Ioctls   Reduced   Changed    Added \n
error processing inode list for fset %ld\n
error processing inode list for fset %ld\n
directory reorganization complete\n
cannot read ilist for fileset %d: %s\n
directory %dblocks %d %d  cannot fit sorted entries\n
directory %d  blocks %d %d  new lengths %d %d  - 
succeeded\n
error %d\n
dirsort failed inode %d, errno %d\n
directory %d block %d offset %d has bad reclen %d\n
directory %d block %d offset %d has bad namlen %d\n
time limit has expired\n
  Extent Fragmentation Report\n
        Total    Average      Average     Total\n
        Files    File Blks    # Extents   Free Blks\n
    blocks used for indirects: %d\n
    %% Free blocks in extents smaller than 64 blks: %2.2f\n
    %% Free blocks in extents smaller than  8 blks: %2.2f\n
    %% blks allocated to extents 64 blks or larger: %2.2f\n
    Free Extents By Size\n  
error processing inode list for fset %ld\n
error processing inode list for fset %ld\n
AU: aun = %3d, tfree = %6d, sfree = %6d\n
failed to read AU inode: %s\n
failed to bmap AU inode\n
failed to read mapino \n
failed to read AU summary inode: %s\n
failed to read AU summary data\n
failed to read AU summary data \n
failed to read SMAP inode: %s\n
cannot bmap SMAP inode\n
failed to read SMAP inode\n
exclusion zone for 
bno = %d, len = %d failed\n
 Pass %d Statistics\n
             Extents    Reallocations   Ioctls                Errors\n
             Searched     Attempted     Issued     FileBusy   NoSpace     Total\n
valid option only for %s  or above layouts\n
 %d EXT4 inodes found; %d converted to TYPED\n
 All inodes found to be in correct format\n
extent reorg pass %d\n
extent reorg complete\n
error processing primary inode list for fileset %lu\n
error processing attribute inode list for fileset %lu\n
could not get file system reorg lock\n
 lock is held by pid %d on path %s\n
could not free file system reorg lock
time limit has expired\n
failed to process primary inode list for fileset %lu\n
failed to process attribute inode list for fileset %lu\n
cannot reorg structural  file in Version 3\n
failed to reallocate inode\n
reorg failed for fset %d ino %d\n
reorg ioctl returned errno %d\n
cannot open %s\n
cannot stat %s\n
cannot open %s\n
cannot stat %s\n
%s is not the root inode of a vxfs file system\n
cannot fstatvfs %s\n
mountpoint %s is not a vxfs file system\n
%s is not a known mountpoint\n
\tand the raw device cannot be deduced\n
use [-r] to specify a raw device\n
filesystem %s doesn't match filesystem super-block on %s\n
use [-r] to specify a raw device\n
using device %s\n
update_fs seek failed\n
update_fs read failed\n
cannot initialize OLT\n
could not initialize devices\n
could not re-initialize devices\n
invalid OLT entry 0x%lx\n
cannot read device file record %d\n
device record checksum is invalid\n
seek error at block %ld : 
write failure at block %ld : 
expected to write %d, wrote %d\n
seek error at block %ld : 
read failure at block %ld : 
expected to read %d, wrote %d\n
%s malloc failed for size %d\n
fsadm_sync - fs_convto_bspec failed for device %s\n
fsadm_sync - open failed for device %s\n
cannot open %s - errno %d\n
cannot lock %s - errno %d\n
lock for %s is held by pid %d\n
ioctl failed, %s, error %d\n
ioctl returned invalid type\n
-o option only valid for version 3 and later file systems\n
set feature (LARGEFILES) failed, errno %d\n
-o option only valid for version 3 and later file systems\n
clear feature (LARGEFILES) failed, errno %d\n
unknown option %d\n
-o option only valid for version 3 and later file systems\n
file system mounted, specify mount point\n
file system dusty,mount and umount first\n
file system dirty, run fsck first\n
%d large files exist, 
cannot clear large file feature\n
unknown option %d\n
while updating the fset headers\n
cannot read inode %d\n
inode %d is large\n
cannot read fset inodes\n
cannot read fileset data\n
cannot write fileset data\n
cannot read fileset data\n
cannot allocate storage for super-block\n
super_update read failed\n
super_update write failed\n
could not find root fileset\n
not primary in a cluster file system\n
file system overhead is %d sectors - cannot shrink to %d\n
%d sectors requested, rounding to %d sectors\n
overhead per allocation unit is %d sectors\n
\trounding down to allocation unit boundary - %d sectors unused\n
%s is currently %d sectors\n
%s is currently %d sectors - size will be increased\n
attempt to resize %s failed with errno %d\n
%s is currently %d sectors - size will be reduced\n
allocations found in shrink range, moving data\n
cannot shrink %s - %s are currently in use.\n
attempt to resize %s failed with errno %d\n
cannot read emap for au %d\n
cannot read ilist extent for fset %d offset %d\n
cannot read imap for au %d\n
strdup failed
age date must be >= 1 day\n
large file size must be between 8 and %d blocks\n
number of passes must be >= 1\n
time must be >= 1 seconds\n
FSType %s not recognized\n
largefiles option is only valid for Solaris 2.6 or higher\n
[-b] option may not be used with [-DEcdeo] options\n
[-o] option may not be used with [-DEcdeb] options\n
file system %s not in %s\n
cannot open mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot lock mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
realloc failed\n
realloc failed\n
vxfs fsadm: Usage:\n
    fsadm [-F vxfs] [-b newsize] [-r rawdev] path_of_mountpoint\n
    fsadm [-F vxfs] [-DEcde] [-vs] [-a days] [-r rawdev] [-l largesize]\n
	  [-p passes] [-t time] path_of_mountpoint\n
    fsadm [-F vxfs] [-o largefiles|nolargefiles] path_of_mountpoint|rawdev\n
    fsadm [-F vxfs] -c path_of_mountpoint\n
strdup failed
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
realloc failed\n
realloc failed\n
strdup failed
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
realloc failed\n
realloc failed\n
age date must be >= 1 day\n
large file size must be between 8 and %d blocks\n
number of passes must be >= 1\n
time must be >= 1 seconds\n
FSType %s not recognized\n
largefiles option is only valid for Solaris 2.6 or higher\n
[-b] option may not be used with [-DEcdeo] options\n
[-o] option may not be used with [-DEcdeb] options\n
file system %s not in %s\n
cannot open %s\n
vxfs fsadm: Usage:\n
    fsadm [-F vxfs] [-b newsize] [-r rawdev] path_of_mountpoint\n
    fsadm [-F vxfs] [-DEcde] [-vs] [-a days] [-r rawdev] [-l largesize]\n
	  [-p passes] [-t time] path_of_mountpoint\n
    fsadm [-F vxfs] [-o largefiles|nolargefiles] path_of_mountpoint|rawdev\n
    fsadm [-F vxfs] -c path_of_mountpoint\n
need sysadmin authorization\n
insufficient privileges\n
age date must be >= 1 days\n
large file size must be between 8 and %d blocks\n
number of passes must be >= 1\n
time must be >= 1 seconds\n
FSType %s not recognized\n
largefiles option is only valid for HP B.10.30 or higher\n
[-b] option may not be used with [-DEcdeo] options\n
[-o] option may not be used with [-DEcdeb] options\n
cannot convert %s to character device\n
cannot stat %s\n
cannot stat /\n
cannot statfs /\n
%s is currently mounted\n
vxfs fsadm: Usage:\n
    fsadm [-F vxfs] [-V] [-b newsize] [-r rawdev] path_of_mountpoint\n
    fsadm [-F vxfs] [-V] [-DEcde] [-vs] [-a days] [-r rawdev] [-l largesize]\n
	    [-p passes] [-t time] path_of_mountpoint\n
    fsadm [-F vxfs] [-o largefiles|nolargefiles] path_of_mountpoint|rawdev\n
    fsadm [-F vxfs] -c path_of_mountpoint\n
arg '%s' must evaluate to a valid offset\n
arg '%s' must be a multiple of %d\n
arg '%s' must evaluate to a valid offset\n
arg '%s' must be a multiple of %d\n
block size '%s' must be positive and 8 meg or less\n
arg '%s' must be a multiple of %d\n
offset or length exceeds file system size\n
cannot create file %s\n
unable to malloc %d byte buffer\n
read error at offset %s on %s\n
write error on output\n
write error on output\n
usage: fscat [-o offset] [-l length] [-b block_size] [-f file] special [...]\n
usage: fscat [-o offset] [-l length] [-b block_size] [-f file] special [...]\n
insufficient privileges\n
usage: fscat [-o offset] [-l length] [-b block_size] [-f file] special [...]\n
%sag_init: memory not properly deallocated.\n
%sinvalid initial inode extent %d in OLT\n
%sno initial inode list found in OLT\n
%sNo valid fset headers found\n
%sinvalid initial inode extent %d in OLT\n
%sno initial inode list found in OLT\n
%sNo valid device inodes found\n
%sNo valid fset headers found\n
%sNo valid log inodes found\n
%serror reading device inode %d\n
%smultiple devices not supported\n
%sinvalid device config entry found\n
%scannot read fset inode %d\n
%sinvalid fileset entry found\n
%sinvalid matching fileset entry found\n
%sinvalid fileset version %d\n
%scannot read fset inode %d\n
%sinvalid fileset entry found\n
%serror reading device config inode\n
%sNo valid EMAP inodes found\n
%scannot find device %d\n
%srebuild structural files? (ynq)
%scannot get device inode %d\n
%scannot get fileset inode %d\n
%scannot get SBlock inode %d\n
%scannot get OLT inode %d\n
%scannot get CUT inode %d\n
%scannot get LOG inode %d\n
%scannot get LOG inode %d\n
%scannot get State inode %d\n
%scannot get Sumino inode %d\n
%scannot get EMAP inode %d\n
%scannot get EMAP inode %d\n
%scannot get ILIST inode %d\n
%scannot get ILIST inode %d\n
%scannot get IAU inode %d\n
%scannot get LCT inode %d\n
%scannot get Quota inode %d\n
%sfileset %d, failure mapping offset %s in IAU inode\n
%s cannot get inode\n
%s failure mapping offset %s\n
%s (%s)\n\t\tfailed validation
%snew size not big enough.\n
%serror reading device config inode\n
%serror writing device config inode\n
%s%d blocks of size %d, %d data blocks\n
%s%d allocation units of %d blocks, %d data blocks\n
%slast allocation unit has %d data blocks\n
%sfile system needs checking\n
%sonly extension allowed.\n
%scould not seek to block offset %d failed\n
%scould not read from block offset %d\n
%scould not seek to block offset %d failed\n
%scould not write to block offset %d\n
%sallocation too large.\n
%scannot read structural inode %d\n
%scannot read structural inode %d\n
%sstructural inode %d marked bad, fix? (ynq)
%sstructural inode %d incorrect size, fix? (ynq)
%s failure mapping offset %s\n
%sstructural inode %d incorrect size, fix? (ynq)
%sstructural inode %d incorrect block count, fix? (ynq)
%s clear attribute area? (ynq)
%sinode %d has orgtype IMMED with size %s\n
%sinode %d has extended data with size %s\n
%sduplicate attribute class/subclass inode %d\n
%scannot read ACL for inode %d\n
%s%sdirectory %d block %d incorrect size %d
%s%sdirectory %d block %d bad hash count %d
%s%sdirectory %d block %d bad free count %d
%s%sdirectory %d block %d offset %s has reclen %d
%s%sdirectory %d block %d offset %s bad namlen\n
%s\t\treclen %d namlen %d
%s%sdirectory %d block %d offset %s references self\n
%s\t\tino %d
%s%sdirectory %d block %d offset %s references parent\n
%s\t\tino %d
%s%sdirectory %d block %d offset %s has ino %d
%s%sdirectory %d block %d offset %s partial entry\n
%s\t\tino %d namlen %d
%s%sdirectory %d block %d offset %s has name '.'
%s%sdirectory %d block %d offset %s has name '..'
%s%sdirectory %d block %d offset %s name contains a slash
%s%sdirectory %d block %d offset %s name contains a NULL
%s%sdirectory %d block %d offset %s references free inode\n
%s\t\tino %d
%s%sdirectory %d block %d offset %s references free inode\n
%s\t\tino %d
%s%sdirectory %d block %d offset %s parent mismatch\n
%s\t\tino %d parent %d
%s%sdirectory %d block %d offset %s references free inode\n
%s\t\tino %d
%swarning - %slost+found is not a directory\n
%s%sdirectory %d block %d incorrect header
%s%sdirectory %d block %d free count mismatch\n
%s\t\texpected %d found %d
%s%sdirectory %d block %d offset %s hash chain mismatch
%s%sdirectory %d block %d offset %s hash chain mismatch
%s update checkpoint block? (ynq)
%s clear block? (ynq)
%s update checkpoint block? (ynq)
%s fix? (ynq)
%s%sdirectory %d checkpoint update failed\n
%s update checkpoint block? (ynq)
%s remove entry? (ynq)
%s%sdirectory %d checkpoint update failed\n
%s dup extent alloc failed\n
%s bad extent\n\t\tstart %d size %d clear? (ynq)
\t\t%scontinue to search? (ynq)
%s dup block\n\t\textent start %d offset %d
%s continue? (ynq)
%scannot find device\n
%scannot read mapino %d\n
%scannot bmap mapino\n
%sau %d state file incorrect - fix? (ynq)
%sau %d emap incorrect - fix? (ynq)
%sau %d secondary emap incorrect - fix? (ynq)
%sout of space, cannot allocate\n
%sallocation too large.\n
%sout of space, cannot allocate\n
%scannot read fileset data\n
%sCannot operate on filesystems with largefiles\n
%sduplicate fileset index %d, clear? (ynq)
%sno valid structural fileset\n
%sno valid mountable filesets found 
%sinternal fileset table overflow\n
%sno valid ILISTs for fileset %d\n
%sILIST for fileset %d failed size validation\n
%sinvalid eopdata count, fset: %u clear? (ynq)
%sinvalid attr_eopdata count, fset: %u clear? (ynq)
%sbad checkpoint fset: %u\n
%sunrecoverable checkpoint fset: %u clear? (ynq)
%sorphaned checkpoint fset: %u clear? (ynq)
%sfset: %u points to an orphaned checkpoint fset, fix? (ynq)
%sfset %d incorrect ninode, fix? (ynq)
%sfset %d incorrect nau, fix? (ynq)
%scannot read IAU inode for fileset %d\n
%scannot read LCT inode for fileset %d\n
%sfileset %d, cannot read %s IAU inode\n
%sfileset %d, %s IAU inode has wrong size\n
%sfileset %d, failure mapping offset %s in %s IAU inode\n
%sfileset %d, invalid magic number in %s IAU %d\n
%sfileset %d, invalid fileset index in %s IAU %d\n
%sfileset %d, invalid IAU number in %s IAU %d\n
%sFileset %d LCT entries are incorrect, fix? (ynq)
%sError reading attribute inode %d\n
%sAttribute inode %d reference count %d, should be 0
%sAttribute inode %d reference count 0
%sCUT inode mapping failure\n
%scorrupted CUT entry, index #%d, clear? (ynq)
%scorrupted CUT entries, clear? (ynq)
%sno CUT entry for fileset %u, fix? (ynq)
%sincorrect CUT entry for fileset %u, fix? (ynq)
%siau %d summary incorrect - fix? (ynq)
%scannot read iau %d summary for fileset %d\n
%sfileset %u iau %d summary incorrect - fix? (ynq)
%sCUT inode lookup failure\n
%sflush fileset headers? (ynq)
%sfilesets could not be updated on disk\n
%scannot get rootino inode\n
%scannot get lost+found inode\n
%s failed validation
%s has invalid mode (0x%8.8x)
%s root inode is not a directory
%s version number too large, reset? (ynq)
%s bad blocks found
%s dup/bad blocks found
%s has invalid attributes
%s clear? (ynq)
%sroot inode is invalid, rebuild? (ynq)
%scannot find fileset %d in table\n
%sfileset %d root inode is invalid, rebuild? (ynq)
%swarning - problem removing attributes for %sinode %d\n
%s failed validation
%s dup/bad blocks found
%s contains invalid directory blocks\n\t\t
%s failed validation
%s failed validation
%s unreferenced structural inode
%s failed validation
%s invalid structural inode,\n\t\tmode (0x%8.8x)
%s attribute inode bad blocks found
%s dup/bad blocks found
%sinvalid fileset id %s\n
%s mismatched reorg extent map\n
%s%sau %d imap incorrect - fix (ynq)
%s%sau %d iemap incorrect - fix (ynq)
%s has no overlay extents, clear overlay flag ? (ynq)
%s has invalid mode (0x%8.8x)\n
%s invalid inode type (0x%8.8x)\n
%s has invalid link count (%d)\n
%s has invalid uid/gid (%d/%d)\n
%s has invalid size (%s)\n
%s has invalid aflags (0x%4.4x)\n
%s marked bad, allocation flags (0x%4.4x)\n
%s partially allocated\n
%s has invalid directory tables\n
%s invalid sparse inode\n
%s has invalid orgtype (%d)\n
%s has invalid eopflags (0x%8.8x)\n
%s has invalid eopdata (%d)\n
%s has invalid rdev (%d)\n
%s has invalid dotdot (%d)\n
%s has invalid reservation (%d)\n
%s has invalid fixextsize (%d)\n
%s has invalid matchino (%d)\n
%s has invalid fsetindex (%d)\n
%s has invalid number of blocks (%d)\n
%s has invalid gen count (%d)\n
%s has invalid version number (0x%08x %08x)\n
%s has invalid block map\n
%s has invalid overlay block map\n
%s has invalid iattrino (%d)\n
%s has non zero attribute area\n
%s has invalid VX_AF_OVERLAY aflags\n
%s has invalid ZLC eopflag set (0x%8.8x)\n
%s IFEMP inode extent[%d,%d] not multiple of %d bytes\n
%s IFIAU inode extent[%d,%d] not multiple of %d bytes\n
%s IFDIR inode extent[%d,%d] is larger than %d blocks\n
%s IFLNK inode contains more than %d data blocks\n
%s cannot find fileset %d\n
%s cannot find fileset %d\n
%s IFILT inode extent[%d,%d] not multiple of %d bytes\n
%serror reading inode\n
%serror writing inode\n
%sextent mapping error in fset %d\n
%sextent mapping error in fset %d\n
%s reorg inode list overflow\n
%s does not have corresponding reorg inode
%s does not have corresponding matchino
%scannot read ino %d\n
%scannot read ino %d\n
%scannot read original ino %d\n
%serror bmapping inode %d\n
%serror bmapping inode %d\n
%s link count is %d should be %d adjust? (ynq)
%s unreferenced file, reconnect? (ynq)
%s no lost+found directory\n
%s lost+found directory checkpoint update failed\n
%s error growing lost+found\n
%s lost+found is full\n
%s lost+found is full\n
%s lost+found is full\n
%s sorry cannot reconnect\n
%s clear? (ynq)
%s%sdirectory loop starting at ino %d ending at %d, fix? (ynq)
%s%ssorry no lost+found directory
%sflush of logged write data for inode %d failed\n
cannot access device %s\n
%scannot initialize aggregate\n
%sextending file system\n
%scannot extend aggregate\n
%scannot initialize aggregate after extension\n
%sfile system is clean - log replay is not required\n
%sintent log marked bad in super-block\n
%scannot perform log replay\n
%ssuper-block indicates that intent logging was disabled\n
%scannot perform log replay\n
%sfile system is not clean, full fsck required\n
%sfile system is not clean, full fsck required\n
%scannot reinitialize aggregate after rebuilding\n
%spass0 - checking structural files\n
%spass1 - checking inode sanity and blocks\n
%spass1b - checking for more dup blocks\n
%spass2 - checking directory linkage\n
%swarning - no lost+found directory for fileset %u\n
%spass3 - checking reference counts\n
%spass4 - checking resource maps\n
%spossible infinite loop aborted\n
%sstructural files could not be rebuilt\n
%ssanity checks/updates have not been completed - restart? (ynq)
%sread of primary OLT failed\n
%sread of OLT copy failed\n
%sno valid OLT, cannot continue\n
%sdata mismatch in OLT or replica\n
%sfsck aborts\n
%smissing or invalid OLT copies, rewrite? (ynq)
%scannot write primary OLT data\n
%smissing or invalid OLT copies, rewrite? (ynq)
%scannot write secondary OLT data\n
%scannot read OLT extent %d\n
%sOLT extent %d has bad checksum\n
%sOLT extent %d has bad magic\n
%sOLT extent %d had bad header size\n
%sOLT extents conflict\n
%sunsupported secondary OLT\n
%sinvalid OLT entry 0x%x\n
%sdup OLT extent block %d\n
%sdup OLT extent block %d\n
%sextent mapping error for ino %d in fileset %u ilist %d\n
%scannot read inode %d in fileset %u ilist %d - ilist hole\n
%sinvalid fileset index (%d), cannot read inode %d\n
%sextent mapping error for ino %d in fileset %u ilist %d\n
%scannot read inode %d in fileset %u ilist %d - ilist hole\n
%siget_insert internal error, cannot continue\n
%siwrite internal error, cannot continue\n
%siput internal error, cannot continue\n
%scannot read ino %d\n
%scannot read ino %d\n
%serror bmapping inode %d\n
%serror bmapping inode %d\n
%serror reading inode %d\n
%serror reading inode %d\n
%slog replay in progress\n
%sfile system does not contain a valid log\n
%scannot perform log replay\n
%scannot re-initialize aggregate after replay\n
%slog replay failed to clean file system\n
%sreplay complete - marking super-block as CLEAN\n
%scannot set file system to clean state\n
%sintent log does not contain valid log entries\n
%scannot malloc transaction status space\n
%scannot malloc directory action space\n
%scannot malloc transaction status space\n
%scannot malloc transaction status space\n
%scannot mark inode %d bad\n
%smarking inode %d bad\n
%scannot read stateino\n
%scannot read sumino\n
%sy for yes, n for no, q for quit (ynq) 
%srgetblk bad request, bno = %d, sz = %d\n
%sgetfreebuf internal error\n
%sgetfreebuf: not enough memory for buffer allocation\n
%scannot allocate global buffer pool\n
%scannot allocate buffer cache hash table\n
%sfsck read failure bno = %d, off = %d, len = %d\n
%sfsck write failure bno = %d, off = %d, len = %d\n
%sfsck read failure bno = %d, off = %d, len = %d\n
%sfsck write failure bno = %d, off = %d, len = %d\n
%scannot get iau inode for fileset\n
%sbmap failure in iau inode %d for fileset %d, offset %s\n
%sinvalid fileset %d\n
%scannot get iau inode for fileset %d\n
%sbmap failure in iau inode %d for fileset %d, offset %s\n
%ssmall extent in iau inode\n
%scannot find device structure for device %d\n
%scannot get au inode for device %d\n
%sbmap failure in au inode %d for device %d, offset %s\n
%s emap inode extent not multiple of 8K bytes for aun %d\n
%sinvalid fileset detected on map operation\n
%sgetlctbuf - invalid fileset\n
%sgetlctbuf - can't read LCT inode\n
%sbmap failure on LCT inode\n
%smalloc failed, add more swap space\n
%sfsck_free invalid buffer\n
%sfile system check failure, aborting ...\n
%sfull file system check required, exiting ...\n
cluster reservation failed for volume %s, exiting ...\n
%sbad log function VX_ILTRAN\n
%sunknown log function %d\n
%sInode modification for invalid inode number %d\n
%sInode modification for invalid inode number %d\n
%sinode %d is marked bad\n
%sbad emap op block %d len %d\n
%sbad smap op aun %d len %d\n
%sbad inode map operation in block %d\n
%smultiple au inode map operation op = %d maptype = %d inode %d\n
%sbad inode operation op %d inode %d\n
%sbad maptype in inode map operation maptype = %d\n
%sbad inode map operation in block %d\n
%smultiple au inode map operation op = %d maptype = %d inode %d\n
%sbad inode map operation op = %d maptype = %d inode %d\n
%sbad indirect truncation inode %d\n
%sbad indirect truncation level %d\n
%sbad indirect truncation block %d\n
%sinvalid indirect extent truncation offset %d extent %d\n
%sbad indirect allocation inode %d\n
%sbad indirect allocation level %d\n
%sbad indirect allocation block %d\n
%sinvalid indirect extent allocation index %d extent %d\n
%sbad directory removal inode %d\n
%sbad directory removal block %d\n
%sbad directory removal entry, block %d\n
%sdirectory block %d in inode %d is bad\n
%sbad directory add inode %d\n
%sbad directory add block number %d\n
%sbad directory add entry, block %d\n
%sdirectory block %d in inode %d is bad\n
%sbad directory reorg inode %d\n
%sbad directory reorg block %d\n
%sbad symbolic link inode %d\n
%sbad symbolic link block %d\n
%sbad symbolic link data length %s\n
%sbad link count table block %d len %d\n
%sbad logged buffer transaction, id %d\n
%sbad logged buffer data transaction, id %d\n
%sbad logged buffer block %d len %d\n
%sbad logged buffer block %d len %d\n
%sinvalid super-block
%sinvalid super-block flags %8.8x
%squota check flag set in superblock of version %d file system\n
%sfile system had I/O error(s) on meta-data.\n
%sfile system had I/O error(s) on user data.\n
%sincomplete resize discovered 
%sresize operation pending, run full fsck\n
%sfile system is larger than device\n
%sresize operation pending, run full fsck\n
%srestore alternate super-blocks? (ynq)
%s- restoring alternate super-blocks\n
%scannot read au header at block %d\n
%sau header %d invalid magic %8.8x
%sinvalid au header number %d found %d
%sinvalid auxiliary super-block checksum in au %d
%sinvalid auxiliary super-block create time in au %d
%srebuild from super-block? (ynq)
%scannot write au header at block %d\n
%scannot find device\n
%scannot read sumino %d\n
%scannot bmap sumino\n
%sau %d summary incorrect - fix? (ynq)
%sau %d state file incorrect - fix? (ynq)
%sau %d summary incorrect - fix? (ynq)
%scannot read stateino %d\n
%scannot bmap stateino\n
%scannot read stateino %d\n
%scannot bmap stateino\n
%ssearch for auxiliary super-block? (ynq)
%sseek failure at offset %s\n
%sread failure at %s\n
%sfound auxiliary super-block at offset %s\n
%screation time %s
%sversion %d blocks %d bsize %d\n
%srebuild super-block from auxiliary? (ynq)
%scontinue searching? (ynq)
%salternate super-block not found\n
%ssuper block file system size incorrect
%s, run full fsck\n
%s, restore super-blocks? (ynq)
%sOK to clear log? (ynq)
%serror writing LOG inode\n
%sfree inode count incorrect %d expected %d fix? (ynq)
%sfree block count incorrect %d expected %d fix? (ynq)
%sfree extent vector incorrect fix? (ynq)
%sset state to CLEAN? (ynq)
%scannot fork a process\n
error waiting for child process\n
Checking filesystem %s\n
\nThe following filesystems could not be repaired :\n
\nThe following filesystems had log replay failure :\n
%s\n
Running parallel replay fsck ...\n
%scannot fork a process\n
error waiting for child process\n
error waiting for child process\n
Running full fsck on %s\n
\nThe following filesystems could not be repaired :\n
%s\n
\nThe following filesystems had log replay failure :\n
%s\n
%sunknown/unsupported ACL subclass %d\n
%sinvalid ACL\n
%sUsage:\n
%s\tfsck [-V] [-t vxfs] [-mnNyY] [-o full,nolog]\n\t\tspecial [...]\n
%sFSType %s not recognized\n
%soptions Y and N are mutually exclusive\n
%soptions m/N and p are mutually exclusive\n
%ssuboptions full/nolog/mounted and p are mutually exclusive\n
cannot stat %s\n
cannot stat %s\n
cannot statvfs %s\n
%s already mounted\n
no device specified\n
no device specified\n
%ssanity check failed: cannot stat %s\n
%ssanity check failed: cannot stat /\n
%ssanity check: root file system OK\n
%ssanity check failed: cannot statvfs /\n
%ssanity check: root file system needs checking\n
%ssanity check: root file system OK (mounted read/write)\n
%ssanity check: %s already mounted\n
%ssanity check: %s OK\n
%ssanity check: %s needs checking\n
%sUsage:\n
%s\tfsck [-V] [-F vxfs] [-mnNyY] [-o full,nolog,mounted,p]\n\t\tspecial [...]\n
%sFSType %s not recognized\n
%soptions Y and N are mutually exclusive\n
%soptions m/N and p are mutually exclusive\n
%ssuboptions full/nolog/mounted and p are mutually exclusive\n
cannot stat %s\n
cannot stat %s\n
cannot statvfs %s\n
%s already mounted\n
no device specified\n
no device specified\n
%ssanity check failed: cannot stat %s\n
%ssanity check failed: cannot stat /\n
%ssanity check: root file system OK\n
%ssanity check failed: cannot statvfs /\n
%ssanity check: root file system needs checking\n
%ssanity check: root file system OK (mounted read/write)\n
%ssanity check: %s already mounted\n
%ssanity check: %s OK\n
%ssanity check: %s needs checking\n
%sUsage:\n
%s\tfsck [-V] [-F vxfs] [-pPmnNyY] [-o full,nolog] [special ...]\n
%sFSType %s not recognized\n
%soptions Y and N are mutually exclusive\n
%soptions n/N and P/p are mutually exclusive\n
%ssuboptions full/nolog and P/p are mutually exclusive\n
%soptions V and P/p are mutually exclusive\n
%scannot stat %s\n
%scannot stat /\n
%scannot statfs /\n
%s%s is currently mounted\n
%schown failed: %s\n
cannot open %s for reading\n
cannot convert %s to c character device\n
Checking filesystem %s\n
cannot fork fsck for %s\n
wait failed for %s\n
cannot open %s for reading\n
cannot convert %s to c character device\n
cannot close %s file\n
%ssanity check failed: cannot stat %s\n
%ssanity check failed: cannot stat /\n
%ssanity check: root file system OK\n
%ssanity check failed: cannot statvfs /\n
%ssanity check: root file system needs checking\n
%ssanity check: root file system OK (mounted read/write)\n
%ssanity check: %s already mounted\n
%ssanity check: %s OK\n
%ssanity check: %s needs checking\n
checkpoint %s failed on %s, %s (%d)\n
usage: %s %s\n
usage: %s %s\n
usage: %s %s\n
usage: %s %s\n
ioctl returned invalid type\n
invalid hostid number\n
invalid host name\n
cannot open %s, %s, error %d\n
ioctl failed, %s, error %d\n
%s is not a cluster mount\n
%s cannot stat: %s\n
%s is not a directory\n
%s cannot statvfs: %s\n
%s is not a VxFS file system\n
%s is not a mountpoint\n
FSType %s not recognized\n
fstyp [-v] special\n
FSType %s not recognized\n
fstyp [-v] special\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
cannot get attributes for %s: %s\n
Bsize %5d  Reserve %s  Extent Size %s 
Usage:\n    getext [-F vxfs] [-s] [-f] <file> ...\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
cannot get attributes for %s: %s\n
Bsize %5d  Reserve %s  Extent Size %s 
Usage:\n    getext [-F vxfs] [-s] [-f] <file> ...\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
cannot get attributes for %s: %s\n
Bsize %5d  Reserve %s	 Extent Size %s 
Usage:\n	getext [-V] [-F vxfs] [-s] [-f] <file> ...\n
Cannot open %s: %s\n
vx_quotactl: invalid cmd %d\n
%s no vxfs filesystems mounted\n
no vxfs filesystems with quotas\n
no quotas file on any mounted vxfs filesystem\n
Cannot open %s: %s\n
Cannot open %s: %s\n
%s is mounted, cannot mkfs\n
%s: cannot stat\n
%s is not a special device and X option not selected.\n
cluster reservation failed for volume %s\n
sectors must be positive and <= %s\n
It is advisable to have block size of %d or larger\n
for file systems greater than %dGB\n
device blocksize of %d not power of 2 >= %d and <= %d\n
device requires a minimum block size of %d\n
logsize must be >= %d and <= %d\n
logsize must be >= %d and <= %d\n
internal error, unknown version %d\n
overhead area ends at block %d, file system size is %d blocks\n
initial allocation requirement is %d blocks,\n
only %d allocatable blocks available\n
overhead per allocation unit is %d blocks\n
allocation unit size is %d blocks\n
inodes per allocation unit is %d, must be between %d and %d\n
data blocks per allocation unit is %d, must be between %d and %d\n
overhead per allocation unit is %d blocks\n
last allocation unit size is %d blocks\n
cannot create file system\n
    %d sectors, %d blocks of size %d, log size %d blocks\n
    %d inodes,
 %d data blocks, %d free data blocks\n
    %d allocation units of %d blocks, %d inodes, %d data blocks\n
    first allocation unit starts at block %d\n
    overhead per allocation unit is %d blocks\n
    last allocation unit has %d data blocks\n
    version %d layout\n
    %d sectors, %d blocks of size %d, log size %d blocks\n
    unlimited inodes,
    %d inodes,
 %d data blocks, %d free data blocks\n
    %d allocation units of %d blocks, %d data blocks\n
    last allocation unit has %d data blocks\n
    first allocation unit starts at block %d\n
    overhead per allocation unit is %d blocks\n
    initial allocation overhead is %d blocks\n
    version %d layout\n
    %d sectors, %d blocks of size %d, log size %d blocks\n
    unlimited inodes,
    %d inodes,
 largefiles supported\n
 largefiles not supported\n
    %d data blocks, %d free data blocks\n
    %d allocation units of %d blocks, %d data blocks\n
    last allocation unit has %d data blocks\n
au options result in invalid au geometry - check nau/ausize.\n
available space is %d blocks\n
allocation unit size is %d blocks\n
specified geometry requires %d allocation units\n
         this geometry can't be limited to 65536 inodes\n
au options result in invalid au geometry - check nau/ausize.\n
malloc failure for device inode table\n
cannot build inode list for device\n
cannot find device description inodes\n
malloc failure for allocation unit data\n
no device file found in table\n
Multi-fileset file system: cannot be reproduced by mkfs alone\n
failed to read file system OLT\n
invalid file system OLT\n
unable to read log inode\n
seek error at block %ld\n
read failure at block %ld\n
vxfs: %s\n
expected to read %d, read %d\n
seek error at block %ld\n
write failure at block %ld\n
wvxfs: %s\n
expected to write %d, wrote %d\n
cannot seek to super-block\n
write_super: %s\n
cannot write super-block\n
write_super: %s\n
expected to write %d bytes, wrote %d\n
log area ends at block %d, aufirst is %d\n
inode size %d requires more than 4 initial inode extents\n
invalid inode placement directive.\n
invalid placement REPOFF & REPLICA on %x entry\n
inode %d not free\n
ran out of reserved inodes\n
ran out of reserved inodes.\n
ran out of user inodes.\n
sorry, alternate device tags must be < %d bytes\n
invalid size string %s\n
malloc failure for device info\n
cannot allocate memory for bitmaps\n
internal error ILT allocation\n
allocation exceeds range of file system blocks.\n
cannot create valid file system.\n
cannot allocate %d extent structures\n
malloc failure for extent maps\n
This file system will be able to support more\n
than 65,536 files. Some older applications (written for UNIX System V\n
Release 3.2 or before) may not work correctly on such a file system,\n
even if fewer than 65,536 files are actually present. If you wish to run such\n
applications (without recompiling them), you should restrict the maximum\n
number of files that may be created to fewer than 65,536.\n\n
Your choices are:\n\n
1. Restrict this file system to fewer than 65,536 files.\n
2. Allow this file system to contain more than 65,536 files\n
   (not compatible with some older applications).\n\n
\nPress '1' or '2' followed by 'ENTER': 
\nNo input received; assuming '1'\n\n
Input not understood.  Try again.\n
Usage:\n
  mkfs [-t vxfs] [-V] -m special\n
  mkfs [-t vxfs] [-V] [-o [N] [ninode=#] [bsize=#] [logsize=#]\n
                          [nau=#] [ausize=#] [aufirst=#] [aupad=#] [inosize=#]\n
                          [version=#] [quota|noquota] [align=#]\n                          [largefiles|nolargefiles]\n
                          special size\n
ninode must be >= %d for Version 1 filesystems\n
-m and -o options are mutually exclusive\n
version %d disk layout not supported on this platform\n
noquota can only be specified with version 2 layout\n
quota option can be specified with version 2 or later layouts only\n
option(s) '%s' are not valid for version 4 layout, ignored\n
only one of nau and ausize may be specified\n
inosize can only be specified on version 2 and later file systems\n
largefiles can only be specified for version 3\n
N and X options are mutually exclusive\n
m and X options are mutually exclusive\n
must specify size with X option\n
unrecognized ninode keyword %s\n
nau must be >= 1\n
bsize must be a power of 2 >= %d and <= %d\n
inosize must be a power of 2 >= %d and <= %d\n
ausize must be >= 1\n
aufirst must be >= %d\n
aupad must be >= 0\n
version number must be
invalid device specification %s\n
largefiles option is only valid for Solaris 2.6 or higher\n
only one of largefiles and nolargefiles can be specified\n
only one of largefiles and nolargefiles can be specified\n
alignment boundary must be > 0\n
alignment boundary must not be > %d\n
unknown suboption\n
 %s is not a character special, block special or a regular file\n
alignment must be a multiple of block size (%d bytes)\n
Usage:\n
  mkfs [-F vxfs] [-V] -m special\n
  mkfs [-F vxfs] [-V] [-o [N] [ninode=#] [bsize=#] [logsize=#]\n
                          [nau=#] [ausize=#] [aufirst=#] [aupad=#] [inosize=#]\n
                          [version=#] [quota|noquota] [align=#]\n                          [largefiles|nolargefiles]\n
                          special size\n
FSType %s not recognized\n
ninode must be >= %d for Version 1 filesystems\n
-m and -o options are mutually exclusive\n
version 3 disk layout not supported on this platform\n
noquota can only be specified with version 2 layout\n
quota option can be specified with version 2 or later layouts only\n
option(s) '%s' are not valid for version 4 layout, ignored\n
only one of nau and ausize may be specified\n
inosize can only be specified on version 2 and later file systems\n
largefiles can only be specified for version 3\n
N and X options are mutually exclusive\n
m and X options are mutually exclusive\n
must specify size with X option\n
unrecognized ninode keyword %s\n
nau must be >= 1\n
bsize must be a power of 2 >= %d and <= %d\n
inosize must be a power of 2 >= %d and <= %d\n
ausize must be >= 1\n
aufirst must be >= %d\n
aupad must be >= 0\n
version number must be one of %d, %d or %d\n
invalid device specification %s\n
largefiles option is only valid for Solaris 2.6 or higher\n
only one of largefiles and nolargefiles can be specified\n
only one of largefiles and nolargefiles can be specified\n
alignment boundary must be > 0\n
alignment boundary must not be > %d\n
unknown suboption\n
 %s is not a character special or a regular file\n
alignment must be a multiple of block size (%d bytes)\n
Usage:\n
  mkfs [-F vxfs] [-V] -m special\n
  mkfs [-F vxfs] [-V] [-o [N] [X] [ninode=#] [bsize=#] [logsize=#]\n
                          [nau=#] [ausize=#] [aufirst=#] [aupad=#]\n
                          [version=#] [largefiles|nolargefiles]\n
                          [inosize=#] special size\n
cannot open %s\n
cannot issue DIOC_CAPACITY ioctl to %s\n
read of %s as VxVM disk failed\n
cannot open %s\n
lseek to lvm record area failed\n
read of lvm record failed\n
cannot determine block device for %s\n
malloc failed for swapinfo structure\n
pstat_getswap() failed\n
%s is a swap device, cannot mkfs\n
%s is a logical volume device, cannot mkfs\n
%s is a VxVM volume device, cannot mkfs\n
FSType %s not recognized\n
ninode must be >= %d for Version 1 filesystems\n
-m and -o options are mutually exclusive\n
option(s) '%s' are not valid for version 3 layout or higher, ignored\n
largefiles or nolargefiles cannot be specified with aginit\n
only one of nau and ausize may be specified\n
inosize can only be specified on version 2 and greater\n
largefiles can only be specified for version 3 or higher\n
aginit can only be specified for version 3 or higher\n
N and X options are mutually exclusive\n
m and X options are mutually exclusive\n
must specify size with X option\n
unrecognized ninode keyword %s\n
nau must be >= 1\n
bsize must be a power of 2 >= %d and <= %d\n
inosize must be a power of 2 >= %d and <= %d\n
ausize must be >= 1\n
aufirst must be >= %d\n
aupad must be >= 0\n
version number must be one of %d, %d or %d\n
invalid device specification %s\n
largefiles option is only valid for HP B.10.30 or higher\n
only one of largefiles and nolargefiles can be specified\n
only one of largefiles and nolargefiles can be specified\n
unknown suboption\n
conflicting suboptions: \"%s\" and \"%s\".\n
conflicting suboptions: \"%s\" without \"%s\".\n
bad mincache type: %s\n
bad convosync type: %s\n
Quick I/O not available\n
QuickLog not available\n
QuickLog not available\n
Cluster File System not available\n
%s invalid checkpoint device\n
%s invalid checkpoint name\n
%s invalid checkpoint device\n
%s not a block special device\n
can't mount a checkpoint before mounting the file system first\n
%s not a mount point or block device\n
%s not a block special device\n
cannot access %s\n
%s does not exist\n
not super user\n
%s or %s%s, no such file or directory\n
Cannot find checkpoint %s\n
HSM session not found\n
cannot mount %s\n
%s no such device\n
%s not a directory\n\tor a component of %s is not a directory\n
%s is not a vxfs file system or it is cluster mounted.\n
%s is not a vxfs file system or\n\t\tvxfs module is not loaded or\n\t\tmount point not supported inside cluster file system.\n
%s is not a vxfs file system or\n\t\tvxfs module is not loaded.\n
option not supported on this version of vxfs.\n
%s is already mounted, %s is busy,\n\t\tallowable number of mount points exceeded,\n\t\tor cluster reservation failed for the volume\n
%s is already mounted, %s is busy,\n\t\tallowable number of mount points exceeded\n
%s or %s not a block device\n
%s not a block device\n
%s write-protected\n
%s is corrupted. needs checking\n
snapsize specified is too small or snapshot device is not large enough\n
%s disk image is incompatible with this system\n
%s no such device or write-protected\n
mount option(s) incompatible with file system %s\n
%s file system module cannot be loaded\n
Cluster mount is not supported on a non-CVM volume\n\t\ton a file system layout version less than 4,\n\t\tor GAB/GLM modules are not loaded,\n\t\tor vxfsckd daemon not started.\n
cannot mount %s\n
could not fork: \"%s\"\n
Usage:\n
%s [-F %s] [generic_options] [-o suboptions] {special | mount_point}\n
        suboptions are:\n
                [rw|ro]\n
                [remount]\n
                [quota]\n
                [suid|nosuid]\n
                [log|delaylog|tmplog]\n
                [datainlog|nodatainlog]\n
                [snapof=primary_special[,snapsize=blocks]]\n
                [convosync={direct|dsync|closesync|delay|unbuffered}]\n
                [mincache={direct|dsync|closesync|tmpcache|unbuffered}]\n
                [blkclear]\n
                [qio|noqio]\n
                [vxldlog=special]\n
                [largefiles|nolargefiles]\n
                [cluster[,ioerror=nodisable]]\n
                [noatime]\n
                [qlog=special]\n
                [ckpt=ckpt_name]\n
FSType %s not recognized\n
illegal -o suboption -- %s\n
cannot open quota file \"%s\" for quotactl\n
cannot open \"%s\" for quotactl\n
VX_QUOTAON failed on quota file \"%s\"\n
cannot open mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
cannot write to mnttab\n
Cannot open '%s'.\n
Cannot use vxldlog= suboption for root file system.\n
Cannot use qlog= suboption for root file system.\n
Path %s is too long for QuickLog to handle.\n
Cannot stat %s.\n
%s not a block device\n
Cannot open '/dev/qlog/admin'.\n
Cannot malloc %d bytes.\n
Cannot malloc %d bytes.\n
Path %s is too long for QuickLog to handle.\n
%s is not a character or a block special device.\n
Cannot stat %s.\n
Cannot issue QL_LOG_GETDEV ioctl.\n
File system not mounted with vxldlog option\n
File system not mounted with qlog option\n
could not fork: \"%s\"\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
cannot write to mnttab\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
cannot write to mnttab\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot open %s for writing\n
cannot write to %s\n
cannot write to %s\n
cannot write to mnttab\n
Usage:\n
%s [-F %s] [generic_options] [-o suboptions] {special | mount_point}\n
        suboptions are:\n
                [rw|ro]\n
                [remount]\n
                [quota]\n
                [suid|nosuid]\n
                [log|delaylog|tmplog]\n
                [datainlog|nodatainlog]\n
                [snapof=primary_special[,snapsize=blocks]]\n
                [convosync={direct|dsync|closesync|delay|unbuffered}]\n
                [mincache={direct|dsync|closesync|tmpcache|unbuffered}]\n
                [blkclear]\n
                [qio|noqio]\n
                [vxldlog=special]\n
                [largefiles|nolargefiles]\n
                [cluster]\n
                [noatime]\n
                [qlog=special]\n
                [ckpt=ckpt_name]\n
FSType %s not recognized\n
largefiles option is only valid for Solaris 2.6 or higher\n
illegal -o suboption -- %s\n
cannot open quota file \"%s\" for quotactl\n
cannot open \"%s\" for quotactl\n
VX_QUOTAON failed on quota file \"%s\"\n
Cannot open '%s'.\n
Cannot use vxldlog= suboption for root file system.\n
Cannot use qlog= suboption for root file system.\n
Path %s is too long for QuickLog to handle.\n
Cannot stat %s.\n
%s not a block device\n
Cannot open '/dev/qlog/admin'.\n
Cannot malloc %d bytes.\n
Cannot malloc %d bytes.\n
Path %s is too long for QuickLog to handle.\n
%s is not a character or a block special device.\n
Cannot stat %s.\n
Cannot issue QL_LOG_GETDEV ioctl.\n
File system not mounted with vxldlog option\n
File system not mounted with qlog option\n
could not fork: \"%s\"\n
Usage:\n
    mount [-l] [-v|-p]\n
    mount [-F vxfs] [-eQ] -a\n
    mount [-F vxfs] [-eQrV]\n
          [-o [rw|ro]\n
              [remount]\n
              [quota]\n
              [suid|nosuid]\n
              [log|delaylog|tmplog]\n
              [datainlog|nodatainlog]\n
              [snapof=primary_special,[snapsize=blocks]]\n
              [convosync={direct|dsync|closesync|delay|unbuffered}]\n
              [mincache={direct|dsync|closesync|tmpcache|unbuffered}]\n
              [blkclear]\n
              [qio|noqio]\n
              [largefiles|nolargefiles]\n
              [ckpt=ckpt_name]\n
              [noatime] {special | mount_point}\n
FSType %s not recognized\n
largefiles option is only valid for HP B.10.30 or higher\n
illegal -o suboption -- %s\n
cannot enable quotas\n
Insufficient arguments (%d)\n
%s not found\n
Target must be directory\n
Insufficient memory to %s %s\n
cannot create %s\n %s\n
<%s> directory\n
%s: different file system\n
errno: %d no permission for %s\n
<%s> directory\n
%s: %s\n
%s: Not a directory.\n
<%s> directory\n
cannot rename %s\n%s\n
cannot mv directories across file systems\n
cannot unlink %s\n %s\n
%s:%s\n
%s:%s\n
cannot unlink %s:%s
%s:%s\n
cannot unlink %s:%s\n
cannot unlink %s\n%s\n
cannot open %s\n%s\n
cannot create %s\n%s\n
%s statvfs %s\n
%s statvfs %s\n
%s getext %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
%s :%s\n
%s setext %s\n
cannot maintain attributes of %s\n
%s setext %s\n
%s AGR1 %s\n
%s statvfs %s\n
%s %s\n
%s write%s\n
cannot maintain attributes of %s\n
%s setext %s\n
%s write %s\n
%s unknown file type %o\n
cannot unlink %s\n%s\n
cannot access %s\n
Insufficient memory to %s %s\n
%s and %s are identical\n
%s: File exists\n
overwrite %s? 
%s: %o mode? 
cannot unlink %s\n%s\n
%s\n%s\n
%s/%s: Name too long\n
Insufficient memory space.\n
Usage: %s%s f1 f2\n       %s%s f1 ... fn d1\n
       mv [-f] [-i] [-e [ ignore | warn | force]] d1 d2\n
       ln [-f] [-n] [-s] d1 d2\n
       cp [-i] [-p] [-r] [-e [ ignore| warn | force]] d1 d2\n
Insufficient arguments (%d)\n
%s not found\n
Target must be directory\n
Insufficient memory to %s %s\n
cannot create %s\n %s\n
<%s> directory\n
different file system\n
errno: %d no permission for %s\n
<%s> directory\n
%s: %s\n
%s: Not a directory.\n
<%s> directory\n
cannot rename %s\n%s\n
can't mv directories across file systems\n
cannot unlink %s\n %s\n
%s:%s\n
%s:%s\n
cannot unlink %s:%s
%s:%s\n
cannot unlink %s:%s\n
cannot unlink %s\n%s\n
cannot open %s\n%s\n
cannot create %s\n%s\n
%s statvfs %s\n
%s statvfs %s\n
%s getext %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
cannot maintain attributes of %s\n
%s :%s\n
%s setext %s\n
cannot maintain attributes of %s\n
%s setext %s\n
%s AGR1 %s\n
%s statvfs %s\n
%s %s\n
%s write%s\n
cannot maintain attributes of %s\n
%s setext %s\n
%s write %s\n
%s unknown file type %o\n
cannot unlink %s\n%s\n
cannot access %s\n
insufficient memory to %s %s\n
%s and %s are identical\n
%s: file exists\n
overwrite %s? 
%s: %o mode? 
cannot unlink %s\n%s\n
cannot create special file %s\n%s\n
%s\n%s\n
%s/%s: name too long\n
insufficient memory space.\n
Usage: %s%s f1 f2\n       %s%s f1 ... fn d1\n
       mv [-f] [-i] [-e { force | ignore | warn}] d1 d2\n
       ln [-f] [-n] [-s] d1 d2\n
       cp [-i] [-p] [-r|-R] [-e { force | ignore | warn}] d1 d2\n
overlapping ranges %d-%d and %d-%d will be merged\n
invalid scan range, scan complete filesystem\n
warning more than %d bad sectors.\n
sector %d will not searched\n
sectors(%d)
blocks(%d)
cannot malloc inode space.\n
version 2 option in version 1 fs\n
mode %-6o uid %-5d gid %-5d ino %s\t%s%s  blocks: 
%s\t%s%s  blocks: 
mode %-6o uid %-5d gid %-5d ino %s\t %s%s\n
cannot malloc inode space.\n
cannot malloc inode space.\n
cannot malloc inode space.\n
cannot malloc inode space.\n
directory bmap failure, inode %d offset %d\n
Directory read buffer allocation failed\n
Directory read buffer reallocation failed\n
no more room for names\n
name buffer allocation failed\n
no more room for directory buffers\n
directory buffer allocation failed\n
cannot allocate buffer for indirect\n
cannot seek to block %d, error %d\n
cannot read block %d, error %d\n
no more room for inode info buffers\n
inode info buffer allocation failed\n
no more room for sector range buffers\n
sector range buffer allocation failed\n
Invalid -i option argument %s ignored.\n
Too many inode numbers as arguments to -i.\n
FSType %s not recognized\n
'-S' incompatible with other options\n
'-b' incompatible with other options\n
'-o sector=#' incompatible with other options\n
'-o block=#' incompatible with other options\n
'-o surface[=#]' incompatible with other options\n
cannot invoke surface scan more than once.\n
No devices specified.\n
a block number is required for each block search\n
Maximumm of %d block searches exceeded\n
invalid block '%s'\n
a number is required for each %s search\n
Too many ranges as arguments\n
invalid range '%s'\n
invalid range '%s'\n
Usage:\nncheck [-F vxfs] [generic_options] \n\t[-i ilist] [-a] [-s] [-o m,b=#,[block=#[-#]],\n\t\t[sector=#[-#]],[surface[=#[-#],]]]] [special ...]\n
Invalid -i option argument \"%s\" ignored.\n
Invalid -i option argument %s ignored.\n
Too many inode numbers as arguments to -i.\n
FSType %s not recognized\n
'-S' incompatible with other options\n
'-b' incompatible with other options\n
'-o sector=#' incompatible with other options\n
'-o block=#' incompatible with other options\n
'-o surface[=#]' incompatible with other options\n
cannot invoke surface scan more than once.\n
No devices specified.\n
a block number is required for each block search\n
Maximum of %d block searches exceeded\n
invalid block '%s'\n
a number is required for each %s search\n
Too many ranges as arguments\n
invalid range '%s'\n
invalid range '%s'\n
Usage:\nncheck [-F vxfs] [generic_options] \n\t[-i ilist] [-a] [-s] [-o m,b=#,[block=#[-#]],\n\t\t[sector=#[-#]],[surface[=#[-#],]]]] [special ...]\n
Invalid -i option argument %s ignored.\n
Too many inode numbers as arguments to -i.\n
a %s number is required for each %s search.\n
Too many ranges as arguments\n
invalid range '%s'\n
FSType %s not recognized\n
'-S' incompatible with other options\n
'-b' incompatible with other options\n
'-o sector=#' incompatible with other options\n
'-o block=#' incompatible with other options\n
'-o surface[=#]' incompatible with other options\n
cannot invoke surface scan more than once.\n
No devices specified.\n
a block number is required for each block search\n
Maximum of %d block searches exceeded\n
invalid block '%s'\n
a number is required for each %s search\n
Too many ranges as arguments\n
invalid range '%s'\n
invalid range '%s'\n
Usage:\n	ncheck [-F vxfs] [-V] [-i ilist] [-a] [-s] [-o [m],[b=#],\n	       [block=#[-#]],[sector=#[-#]],[surface[=#[-#],]]] special ...\n
%s is not a valid file system type\n
%s is a bad block size\n
%s is a bad file system size\n
%s is a bad swap reservation\n
%s is an unknown disk type\n
cannot specify both \"-o largefiles\" and \"-o nolargefiles\"\n
cannot specify both \"-o largefiles\" and \"-o nolargefiles\"\n
Illegal suboption -- %s\n
Illegal option -- %c\n
-R and -B cannot be used when -s is used.\n
Cannot not get the status of %s: %s\n
%s is not a character device\n
Cannot open %s: %s\n
Cannot open %s: %s\n
Cannot determine disk capacity of %s: %s\n
no space allocated to device %s\n
insufficient space for boot/swap reservation\n
Cannot execute the mkfs command: %s\n
Too many arguments to the mkfs command.\n
Cannot fork mkfs: %s\n
Cannot get the process status of %s: %s\n
Cannot execute %s: %s\n
out of memory\n
usage: newfs [-F vxfs] [-V] [-v] [-R swap] [-B] [-O disk_type] [mkfs-options] special\nwhere mkfs-options are:\n\t-s file system size (sectors)\n\t-b block size\n\t-o largefiles|nolargefiles\n
Usage:\n    quot [-F vxfs] [-V][-cfhnv] [-o fsetname=fileset] [filesystem ..]\n    quot [-F vxfs] [-V][-cfhnv] -a\n
FSType %s not recognized\n
No arguments are allowed with the -a option\n
Only one filesystem argument allowed with -n or -o fsetname=%s options\n
no %s file\n
calloc failure - out of memory\n
Realloc failed -- out of memory\n
%s %s\n
no %s file\n
%s is not an %s filesystem\n
%s is not a device and is not in the %s file\n
malloc failed - out of memory\n
%s is not a valid file system type\n
Illegal option -- %c\n
%s: %s
%s is of wrong file type\n
Can't open %s: %s\n
Can't open %s: %s\n
%s is not a VxFS filesystem\n
%s is a read-only filesystem\n
%s is not mounted\n
Syncing quotas for %s (%s)\n
Warning: Quotas are not compiled into this kernel\n
usage: quotacheck [-F vxfs] [-V] [-pPv] filesystem ...\n   or  quotacheck [-F vxfs] [-V] [-pPv]  -a\n
flag must be one of align, trim, contig, noreserve, chgsize or noextend\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
cannot set attributes for %s: %s\n
Usage:\n    setext [-F vxfs] [-e extent size] [-r reservation]\n           [-f align|trim|contig|noreserve|chgsize|noextend] <file>\n
flag must be one of align, trim, contig, noreserve, chgsize or noextend\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
%s is not a valid extent size\n
%s is not a valid reservation size\n
cannot set attributes for %s: %s\n
Usage:\n    setext [-F vxfs] [-e extent size] [-r reservation]\n           [-f align|trim|contig|noreserve|chgsize|noextend] <file>\n
flag must be one of align, trim, contig, noreserve, chgsize or noextend\n
FSType %s not recognized\n
cannot open %s: %s\n
cannot statvfs %s: %s\n
%s is not on a vxfs file system\n
%s is not a valid extent size\n
%s is not a valid reservation size\n
cannot set attributes for %s: %s\n
Usage:\n	setext [-V] [-F vxfs] [-e extent size] [-r reservation]\n	       [-f align|trim|contig|noreserve|chgsize|noextend] <file>\n
illegal -o suboption -- %s\n
cannot open mnttab\n
cannot lock mnttab\n
%s not found in mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
illegal -o suboption -- %s\n
cannot open mnttab\n
cannot lock mnttab\n
%s not found in mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
illegal -o suboption -- %s\n
cannot open mnttab\n
%s not found in mnttab\n
Usage:\n
    %s [generic_options] [-o [force]]
  {special | mount_point}\n
cannot open %s: %s\n
cannot set force unmount for %s: %s\n
%s cannot unmount : %s\n
%s could not remove mnttab entry\n
Failed to devballoc %d,0x%x,0x%x\n
Failed to devballoc deadbeef.\n
Failed to write deadbeef %d.\n
Failed to dirty super\n
Failed to balloc %d, 0x%x, %d, %d\n
ran out of blocks %d, %d, %d\n
Failed write of block %d: 
Failed write of block %d: 
Failed write of block %d: 
Failed read of block %d: 
Failed to lseek to %d: 
Failed to read %d, %d: 
Failed to lseek to %d: 
Failed to write %d, %d: 
passed EOF %s, %s\n
Inval orgtype 0x%x\n
failed to balloc %d\n
failed to write %d,%d,0x%x\n
Inval type 0x%x\n
failed to balloc %d\n
failed to write %d,%d,0x%x\n
failed to switch\n
failed to balloc %d\n
 failed to write %d,%d,0x%x\n
Failed to read %d, %d, 0x%x, %d\n
Failed to write %d, %d, 0x%x, %d\n
ran out of dir blks %d\n
invalid entleft %d\n
failed to write42 %d, %d, 0x%x\n
invalid inum %d, 0x%x, 0x%x\n
error duplicating inum %d, unexpected indirect extent\n
failed to alloc %d blks\n
failed to read %d, %d, 0x%x\n
failed to write43 %d, %d, 0x%x\n
failed to get inum 0x%x, %d, 0x%x\n
failed to get fset %d IFILT\n
failed to get fset %d IFILT\n
failed to alloc %d blks\n
failed to write at %d bytes %d errno %d from 0x%x\n
failed to get fset %d IFILT\n
failed to write45 %d, %d (%d), 0x%x\n
invalid fset %d\n
invalid flg 0x%x\n
failed to find inum for 0x%x, %d, 0x%x\n
failed to alloc %dblks\n
failed to write46 %d, %d, 0x%x\n
balloc %d, 0x%x failed 0x%x\n
vxbmap_enter %d failed 0x%x\n
vxbmap_enter %d failed 0x%x\n
Invalid inode type 0x%x\n
failed to setup meta\n
failed to convert file system\n
failed to write super block\n
Usage: 
\tvxfsconvert [-l logsize] [-s size] [-efnNvyY] special\n
Invalid log size %s\n
Invalid number of blocks %s\n
-s and -e are mutually exclusive\n
could not open logfile %s\n
-y and -n are mutually exclusive\n
The following filesystem types are supported:\n
Unexpected type %d\n
failed to get inum %d\n
failed to alloc %d blks\n
failed to readcur_pos %d,%d,%d\n
failed to add_dir  %d,%d,%d\n
failed to read cur_pos %d,%d,%d\n
failed to bmap_enter %d\n
failed to alloc%d blks\n
failed to write %d, %d\n
failed to alloc%d blks\n
failed to readcur_pos %d,%d,%d\n
failed to write %d, %d\n
y for yes, n for no, q for quit (ynq) 
CONVERSION FAILED\n
An additional %dK bytes required to complete the conversion\n
Total of %dK bytes required to complete the conversion\n
can't malloc %d bytes\n
failed to get fset %d IFILT\n
failed to write %d, 0x%x\n
failed to iget IFFSH0\n
failed to write fset\n
failed to iget IFLCT0\n
failed to write lct\n
failed to read superblock\n
failed to init ilist\n
failed to create olt\n
failed to create log\n
failed to create fset\n
failed to set up misc meta\n
failed to create devconf\n
unrecognized filesystem type\n
File system is dirty, must run fsck to clean it up\n
invalid block size  %d\n
failed to init block area\n
failed to balloc %d\n
failed to balloc %d\n
failed to get fset %d IFILT\n
failed to get fset %d IFEAU\n
failed to iinit IFEAU\n
failed to get fset %d IFAUS\n
failed to iinit IFAUS\n
failed to get fset %d primary IFIAU\n
failed to iinit fset %d primary IFIAU\n
failed to setup iau for fset %d\n
failed to get fset %d primary IFIAU\n
failed to iinit fset %d primary IFIAU\n
failed to setup iau for fset %d\n
failed to get fset %d attribute IFIAU\n
failed to iinit fset %d attribute IFIAU\n
failed to setup iau for fset %d\n
failed to iget IFCUT\n
failed to iinit IFCUT\n
failed to get fset %d IFLCT\n
failed to iinit fset %d IFLCT\n
failed to get fset %d IFQUO\n
failed to iinit fset %d IFQUO\n
failed to write %d, 0x%x\n
invalid logsize %d\n
invalid logsize %d\n
failed to iget IFLOG0\n
failed to iinit IFLOG0\n
failed to iget IFDEV0\n
failed to iinit IFDEV0\n
failed to write51 %d, %d, 0x%x\n
failed to iget IFEMP0\n
failed to iinit IFEMP0\n
failed to get fset %d IFILT\n
failed to iget IFFSH0\n
failed to iinit IFFSH0\n
failed to init fset %d ilist\n
failed to get fset %d IFILT\n
failed to iinit fset %d IFILT\n
failed to get fset %d IFILT_DUP\n
failed to iinit fset %d IFILT_DUP\n
Do you wish to commit to conversion? (ynq) 
CONVERSION WAS NOT COMMITTED\n
failed to write lct\n
failed to write fsetbuf\n
failed to write ilist\n
failed to read to buf %d\n
failed to write super %d, %d\n
failed to write whole buf %d\n
failed to iget IFLAB\n
failed to write alt super %d, %d\n
 CONVERSION WAS SUCCESSFUL\n
failed to get fset %d IFILT\n
failed to iinit fset %d IFILT\n
failed to balloc %d\n
failed to iget IFLAB\n
failed to iinit IFLAB\n
failed to balloc %d\n
failed to get fset %d IFILT\n
failed to write52 %d, %d, 0x%x\n
failed to write53 %d, %d, 0x%x\n
failed to iget IFOLT0 inode\n
failed to iinit IFOLT0\n
failed to iget IFOLT1 inode\n
failed to iinit IFOLT1\n
Invalid map size %d\n
bit out of range %d\n
using inuse bit %d\n
freeing free bit %d\n
invalid mark_type %d\n
Invalid allocation size %d, %d\n
%s no such file or directory\n
%s Failed to convert to device\n
%s is not a device\n
%s is mounted\n
bad icache size\n
failed to mapalloc.\n
failed to find inum %d\n
failed to read blk %d\n
failed to find inum %d\n
d: invalid flg 0x%x\n
failed to find inum %d\n
failed to read bp %d\n
failed to ufs_cgget %d\n
failed on inum %d\n
inode %d is unknown (mode 0x%x), ignore? (ynq) 
failed to find inum %d\n
d: not a dirctory 0x%x\n
inum %d out of range\n
failed to read %d,%d,0x%x\n
failed to read blk %d\n
Buffer overrun %d, %d\n
Invalid directory entry: %d, %d, %d\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to ufs_cgget %d\n
can't allocate multipleof 8K\n
failed to allocate multiple of 8K\n
cyl out of range %d\n
Bad CG magic 0x%x, 0x%x\n
cyl out of range %d\n
failed to ufs_cgget %d\n
Invalid inum %d\n
%s no such file or directory\n
%s Failed to convert to device\n
%s is not a device\n
%s is mounted\n
bad icache size\n
failed to mapalloc.\n
failed to find inum %d\n
failed to read blk %d\n
failed to find inum %d\n
d: invalid flg 0x%x\n
failed to find inum %d\n
failed to read bp %d\n
failed to ufs_cgget %d\n
failed on inum %d\n
inode %d is unknown (mode 0x%x), ignore? (ynq) 
failed to find inum %d\n
d: not a directory 0x%x\n
inum %d out of range\n
failed to read %d,%d,0x%x\n
failed to read blk %d\n
Buffer overrun %d, %d\n
Invalid directory entry: %d, %d, %d\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to ufs_cgget %d\n
can't allocate multiple of 8K\n
failed to allocate multiple of 8K\n
cyl out of range %d\n
Bad CG magic 0x%x, 0x%x\n
cyl out of range %d\n
failed to ufs_cgget %d\n
Invalid inum %d\n
bad icache size\n
hfs_super: failed mapalloc.\n
hfs_getino: failed to find inum %d\n
hfs_getino: failed to find acl inum %d\n
cannot parse ACL\n
failed to read blk %d\n
hfs_getdata: failed to find inum %d\n
hfs_getdata %d: invalid flg 0x%x\n
hfs_getext: failed to find inum %d\n
hfs_filliblk: failed to read bp %d\n
failed to hfs_cgget %d\n
hfs_inext: failed on inum %d\n
inode %d is unknown (mode 0x%x), ignore? (ynq) 
hfs_getdir: failed to find inum %d\n
hfs_getdir %d: not a directory 0x%x\n
hfs_iget: inum %d out of range\n
hfs_iget: failed to read %d,%d,0x%x\n
hfs_bmap: failed to read blk %d\n
hfs_filldent: Buffer overrun %d, %d\n
hfs_marksup: Invalid super magic 0x%x\n
hfs_marksup: Invalid mark bit 0x%x\n
hfs_cgballoc: failed to hfs_cgget %d\n
can't allocate multiple of 8K\n
failed to allocate multiple of 8K\n
hfs_cgget: cyl out of range %d\n
hfs_cgget: Bad CG magic 0x%x, 0x%x\n
hfs_cgput: cyl out of range %d\n
failed to hfs_cgget %d\n
Invalid inum %d\n
%s no such file or directory\n
%s is not a device\n
%s is mounted\n
Lost connection to remote host.\n
shell/tcp: unknown service\n
Protocol to remote tape server botched (code %s?).\n
%s: %s\n
Protocol to remote tape server botched (code %s?).\n
Protocol to remote tape server botched (in rmtgets).\n
Invalid user name '%s'\n
No support for remote tape\n
No support for remote tape\n
cannot read %s: %s\n
WARNING: no file `%s', making an empty one\n
cannot create %s: %s\n
cannot read %s even after creating it: %s\n
Looking for name %s in dumpdates = %s for level = %c\n
cannot rewrite %s: %s\n
fseek: %s\n
%s: %s\n
ftruncate (%s): %s\n
level %c dump on the epoch\n
level %c dump on %s
%s: %s\n
Unknown intermediate format in %s, line %d\n
getrecord: %s %s %c %s
date \"%s\" is improperly formatted\n
bad option argument \"%s\" for -B\n
multiple dump levels specified %c and %c\n
Must specify disk or filesystem\n
You cannot use the T and u flags together.\n
You cannot use the T flag for full (zero level) dumps.\n
The number of output records per volume (%d) must\nbe greater than or equal to the blocking factor (%d).\n
Must specify disk or filesystem\n
Cannot find filesystem %s\n
cannot determine primary for snapshot %s\n
filesystem %s is not clean, it require torun fullfsck.\n
Date of this level %c dump: the epoch\n
Date of this level %c dump: %s
Date of last level %c dump: the epoch\n
Date of last level %c dump: %s
Dumping %s 
(%s) 
snapshot of %s 
to %s
 on host %s
\n
mapping (Pass I) [regular files]\n
mapping (Pass II) [directories]\n
estimated %ld blocks (%s) on %3.2f tape(s).\n
estimated %ld blocks (%s).\n
dumping (Pass III) [directories]\n
dumping (Pass IV) [regular files]\n
vxdump: %ld tape blocks\n
vxdump: %ld tape blocks on %d volumes(s)\n
filesystem %s is not clean, there maybe datacorrupted during the process of vxdump.\n
vxdump is done!\7\7\n
vxdump is done\n
bad '%c' value \"%s\"\n
Signal on pipe: cannot recover\n
Rewriting attempted as response to unknown signal.\n
SIGSEGV: ABORTING!\n
bogus errno in strerror
TP_BSIZE must be a multiple of DEV_BSIZE\n
fopen on %s fails: %s\n
y
Y
n
N
must answer \"yes\" or \"no\"\n
 (\"yes\" or \"no\") 
 (\"yes\" or \"no\") 
\7\7
\n
 (\"yes\" or \"no\") 
Interrupt received.\n
Do you want to abort dump?
No group entry for %s.\n
Cannot open %s: %s\n
Message to %s at %s\n
\n\7\7\7Message from the dump program to all operators at %d:%02d ...\r\n\n  vxdump: needs attention: 
%3.2f%% done, finished in %d:%02d\n
Dump these file systems:\n
Last dump(s) done (Dump '>' file systems):\n
%c %8s\t(%6s) fset='%s' Last dump: Level %c, Date %s\n
write error on %s\n
Cannot recover\n
write error %d blocks into volume %d\n
vxdump write error!\n
Do you want to restart?
Closing this volume.	 Prepare to restart with new media;\n
this dump volume will be rewritten.\n
Broken pipe\n
error writing command pipe: %s\n
error reading command pipe in master: %s
End of tape detected\n
error reading command pipe in master: %s
error reading command pipe in master: %s
EOT detected in last 2 tape records!\n
Use a longer tape, decrease the size estimate\n
or use no size estimate at all.\n
Closing %s\n
Change Volumes: Mount volume #%d\n
change vxdump volume!\7\7\n
Is the new volume mounted and ready to go?
Do you want to abort?
rollforward: protocol botch
error writing command pipe: %s
error reading command pipe in master: %s
EOT detected at start of the tape!\n
Context save fork fails in parent %d\n
Tape: %d; parent process: %d child process %d\n
Parent %d waiting for child %d has another child %d return\n
Child %d returns LOB status %o\n
Child %d finishes X_FINOK\n
Child %d finishes X_ABORT\n
Child %d finishes X_REWRITE\n
Child %d finishes unknown %d\n
Bad return code from dump: %d\n
Child on Tape %d has parent %d, my pid = %d\n
Dumping volume %d on %s\n
Cannot open tape.  Do you want to retry the open?
Cannot open tape.  Do you want to retry the open?
Cannot open output \"%s\".\n
Do you want to retry the open?
Volume %d begins with blocks from inode %d\n
The ENTIRE dump is aborted.\n
pid = %d exits with status %d\n
failed to create pipe for communication %s\n
too many slaves, %d (recompile smaller): %s\n
slave couldn't reopen disk: %s\n
master/slave protocol botched - didn't get pid of next slave.\n
master/slave protocol botched.\n
error reading command pipe: %s\n
Skipping compressed file (inode %d)\n
directory bmap failure inode %d offset %d\n
directory bmap failure inode %d offset %d\n
inode bmap failure inode %d offset %d\n
lseek failure on %s - block %d\n
read failure on %s - block %d\n
corrupted directory, inumber %d\n
bread: lseek fails block %d\n
read error from %s: %s: [block %d]: count %d\n
read error from %s: %s: [block %d]: expected %d got %d\n
More than %d block read errors from %d\n
disk %s is ailing.\n
This is an unrecoverable error.\n
Do you want to attempt to continue?
Mountpoint is not specified for vxfs entry in /etc/fstab.\n
Device is not specified for vxfs entry in /etc/fstab.\n
%s\n
Usage:\n    vxdump [-clnuwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] filesystem\nor\n    vxdump [0123456789fustdWwnlcb [argument]] filesystem\n
Mountpoint is not specified for vxfs entry in /etc/vfstab.\n
Device is not specified for vxfs entry in /etc/vfstab.\n
%s\n
Can't open %s for dump table information.\n
Usage:\n    vxdump [-clnouwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] filesystem\nor\n    vxdump [0123456789fustdWwnolcb [argument]] filesystem\n
%s\n
Can't open %s for dump table information.\n
 Usage:\n    vxdump [-clnouwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] filesystem\nor\n    vxdump [0123456789fustdWwnolcb [argument]] filesystem\n
permission denied\n
%s no vxfs filesystems with quotas\n
%s no vxfs file systems with %s file\n
no such user %s\n
invalid uid %d\n
no such user %s\n
invalid uid %d\n
no such user %s\n
invalid uid %d\n
no such user %s\n
You have too many processes\n
fork failed: %s\n
%s: exec failed: %s\n
Cannot open %s: %s\n
Can't re-read temp file %s: %s\n
%s unknown file system\n
%s bad format\n
Cannot open %s: %s\n
Can't re-read temp file %s: %s\n
%s unknown file system\n
%s bad format\n
Cannot open %s: %s\n
malloc failed: %s\n
malloc failed: %s\n
Cannot open %s: %s\n
error seeking on %s: %s\n
read error in %s: %s\n
Cannot open %s: %s\n
error seeking on %s: %s\n
write error in %s: %s\n
Bad signal 0x%x\n
Bad signal 0x%x\n
Usage:\nvxenablef [-e online|dmapi|full] | [-a]\n
Unable to enable VxFS feature %s.  errno %d\n
OnLine JFS feature license is set.\n
Unrecognized license for feature %s\n
Failed to check the license, errno %d\n
System is not licensed\n
%s is not licensed\n
System is licensed for features\n
cannot open %s: error: %s\n
REG_FSCKD ioctl failed: %s\n
WAITDEV ioctl failed: %s\n
Cannot open portal device: %s\n
GETDEV ioctl failed: %s\n
Cannot convert %s to raw device\n
fork failed: %s\n
not reached\n
fork failed: %s\n
Exec fsck on device %s failed: %s\n
cannot get vxfs type, errno %d\n
No arguments are allowed with the -a option\n
memory allocation failed\n
Only one filesystem argument allowed with -n option\n
Cannot open %s: %s\n
Cannot open %s: %s\n
memory allocation failed\n
stat failed %s: %s\n
cannot determine raw device for %s, using block device\n
Cannot open %s: %s\n
%s not vxfs filesystem\n
cannot determine raw device for %s, using block device\n
no disk quota for uid 0\n
%s: unknown user\n
no disk quota for %s (uid 0)\n
%s (uid %d): permission denied\n
Block limit reached on %s\n
Over disk quota on %s, remove %dK\n
Over disk quota on %s, remove %dK within %s\n
Over disk quota on %s, time limit has expired, remove %dK\n
File count limit reached on %s\n
Over file quota on %s, remove %d file(s)\n
Over file quota on %s, remove %d file(s) within %s\n
Over file quota on %s, time limit has expired, remove %d file(s)\n
Name must be %s or %s not %s\n
Cannot open %s: %s\n
malloc failed: %s\n
Cannot open %s: %s\n
Cannot open %s: %s\n
Cannot rename %s: %s\n
Cannot turn off quotas on %s\n
Cannot turn on quotas on %s\n
%s: quotas turned off\n
%s: quotas turned on\n
%s: quotas are not supported on this file system\n
%s: unexpected error %d while changing quota state\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
Cannot open %s: %s\n
Cannot open %s: %s\n
%s: quotas not supported on this file system\n
%s: quotas are not enabled, usage info may be out of date\n
Cannot report on %s\n
Cannot open %s: %s\n
Cannot stat %s: %s\n
malloc failed: %s\n
 Extract directories from tape\n
 %s - cannot create directory temporary\n
 fopen: %s\n
: %s - cannot create modefile \n
 fopen: %s\n
 opendirfile: %s\n
Root directory is not on tape\n
%s%s: name exceeds %d char\n
corrupted directory: %s.\n
corrupted directory: bad reclen %d\n
 corrupted directory: bad inum %d\n
bad seek pointer to rst_seekdir %d\n
error reading directory\n
corrupted directory: bad reclen %d\n
 corrupted directory: bad inum %d\n
 Set directory mode, owner, and times.\n
 fopen: %s\ncannot open mode file %s\ndirectory mode, owner, and times not set\n
set owner/mode for '.'
cannot find directory inode %d\n
error setting directory modes\n
Cannot find directory inode %d named %s\n
 %s: 
 cannot create file: %s\n
 read error extracting inode %d, name %s\n
 read: %s\n
 write error extracting inode %d, name %s\n
 write: %s\n
no memory directory table\n
Lost connection to remote host.\n
shell/tcp: unknown service\n
Protocol to remote tape server botched (code %s?).\n
Protocol to remote tape server botched (code %s?).\n
Protocol to remote tape server botched (in rmtgets).\n
invalid user name '%s'\n
No support for remote tape\n
No support for remote tape\n
 %s: not a directory\n
 %s: not on extraction list\n
 Available commands are:\n\tls [arg] - list directory\n\tcd arg - change directory\n\tpwd - print current directory\n\tadd [arg] - add `arg' to list of files to be extracted\n\tdelete [arg] - delete `arg' from list of files to be extracted\n\textract - extract requested files\n\tsetmodes - set modes of requested directories\n\tquit - immediately exit program\n\twhat - list dump header information\n\tverbose - toggle verbose flag (useful with ``ls'')\n\thelp or `?' - print this list\nIf no `arg' is supplied, the current directory is used\n
 verbose mode off\n
 verbose mode on\n
 debugging mode off\n
 debugging mode on\n
 %s: unknown command; type ? for help\n
 vxrestore > 
 command lines cannot be continued\n
 missing %c\n
 %s: out of memory\n
 %s: out of memory\n
vxrestore interrupted, continue
illegal blocksize -- %s
block size must be greater than 0
missing -e option argument
invalid -e option argument %s
%c and %c options are mutually exclusive
illegal dump number -- %s
dump number must be greater than 0
none of i, R, r, t or x options specified
Begin incremental restore\n
Calculate node updates.\n
Begin level 0 restore\n
Calculate extraction list.\n
Verify the directory structure\n
Usage:\n    vxrestore [-rRtxihmvy] [-s number] [-b block_size]\n              [-e opt] [-f file] [file_name ...]\nor\n    vxrestore tfhsvy [file_name ...]\n    vxrestore xfhmsvy [file_name ...]\n    vxrestore rfsvy\n    vxrestore Rfsvy\n
\n
leaf
dir 
 %s:not on the tape\n
 Mark entries to be removed.\n
%s: REMOVE\n
corrupted symbol table\n
 name/inode conflict, mktempname %s\n
deleted hard link %s to directory %s\n
cannot KEEP and change modes
[%s] %s: Extraneous name\n
%s: (inode %d) not found on tape\n
[%s] %s: inconsistent state\n
[%s] %s: impossible state\n
Find unreferenced names.\n
%s: remove unreferenced name\n
unreferenced with flags
%s: remove unreferenced name\n
Remove old nodes (directories).\n
cannot remove, non-empty
Continue extraction of new leaves\n
Extract new leaves.\n
%d: bad first\n
%s: not found on tape\n
expected next file %d, got %d\n
unknown file on tape\n
unexpected file on tape
Extract requested files\n
corrupted symbol table\n
%s: not found on tape\n
corrupted symbol table\n
%s: not found on tape\n
corrupted symbol table\n
Add links\n
Check the symbol table.\n
incomplete operations
Warning: missing name %s\n
missing inumber %d\n
type should be LEAF
addino: out of range %d\n
duplicate inum
deleteino: out of range %d\n
deleteino: %d not found\n
%s is not a directory\n
%s: pathname too long\n
no memory to extend symbol table\n
bad name to addentry %s\n
link to non-existent name\n
duplicate entry\n
not marked REMOVED
freeing referenced directory
freeing non-empty directory
lookupino failed
link not found
cannot move ROOT
cannot find entry in parent list
bad name\n
no space for string table\n
Check pointing the restore\n
fopen: %s\n
cannot create save file %s for symbol table\n
fwrite: %s\n
output error to file %s writing symbol table\n
Initialize symbol table.\n
no memory for entry table\n
open: %s\n
cannot open symbol table file %s\n
stat: %s\n
cannot stat symbol table file %s\n
cannot allocate space for symbol table\n
read: %s\n
cannot read symbol table file %s\n
Incremental tape too low\nThe date that this dump was dumped from (\"%s\")\nis later than the date of the last restore (\"%s\").\n
Incremental tape too high\nThe date that this dump was dumped from (\"%s\")\nis earlier than the date of the last restore (\"%s\").\n
You are either restoring out of order or restoring from a dump file that\nwas created using the vxdump -T option.\n
Continue anyway
initsymtable called from command %c\n
cannot open %s: %s\n
cannot open %s: %s\n
Cannot allocate space for tape buffer\n
Verify tape and initialize maps\n
%s: %s\n
Tape is not a vxdump tape\n
cannot stat . : %s\n
bad block size %d\n
cannot preserve extent attributes\n
Tape is not volume 1 of the dump\n
level %c dump of %s on %s%s%s\n
header read failed at %d blocks\n
no header after volume mark!\n
Cannot find file removal list\n
maxino = %d\n
no memory for file removal list\n
Cannot find file dump list\n
no memory for file dump list\n
cannot stat . : %s\n
bad block size %d\n
cannot preserve extent attributes\n
Changing volumes on pipe input?\n
You have read volumes
%s%d
\n
Specify next volume #: 
Volume numbers are positive numerics\n
This program can only deal with %d volumes\n
Mount tape volume %d\nEnter ``none'' if there are no more tapes\notherwise enter tape name (default: %s) 
Cannot open %s\n
header read failed at %d blocks\n
tape is not a vxdump tape\n
Wrong volume (%d)\n
Wrong dump date\n\tgot: %s
\twanted: %s
read %ld recs, tape starts with %ld\n
Setting tpblksread from header to %d\n
Skipping %d duplicate records.\n
active file into volume 1\n
Warning: End-of-input encountered while extracting %s\n
Cannot have multiple dumps on pipe input\n
Dump	 date: %s
Dumped from: the epoch\n
Dumped from: %s
%s: unknown file mode 0%o\n
skipped xenix special named file %s\n
skipped socket %s\n
unextracted directory %s\n
extract file %s\n
%s: zero length symbolic link (ignored)\n
extract special file %s\n
%s: cannot create special file: %s\n
extract file %s\n
%s: cannot create file: %s\n
 Warning:  cannot maintain attributes on %s\n
 File skipped - cannot maintain attributes on %s\n
ioctl SETEXT failed: %s
skipping %s\n
fstat error extracting inode %d, name %s\nfstat: %s\n
truncup extracting inode %d, name %s\nftruncate: %s\n
ioctl SETEXT failed: %s\n
skipping %s\n
ran off end of tape\n
not at beginning of a file\n
header read failed at %d blocks\n
Missing address (header) block for %s at %d blocks\n
Missing large address (header) block for %s at %d blocks\n
write error extracting inode %d, name %s\nwrite: %s\n
seek error extracting inode %d, name %s\nlseek: %s\n
seek error extracting large file - inode %d, name %s\nlseek: %s\n
symbolic link name: %s->%s%s; too long %d\n
unallocated block in symbolic link %s\n
hole in map\n
mid-media short read error.\n
Tape read error while 
trying to set up tape\n
trying to resynchronize\n
restoring %s\n
skipping over inode %d\n
continue
continuation failed: %s\n
End-of-tape encountered\n
partial block read: %d should be %d\n
tape read error: %s\n
Tape block size (%d) is not a multiple of dump block size (%d)\n
Tape block size is %d\n
Note: Doing Byte swapping\n
Warning:  interim vxdump format assumed\n
gethead: bad bitmap encountered\n
gethead: unknown inode type %d\n
Volume header count %d  tpblksread %d\n
Dump mask header
Remove mask header
File header, ino %d  count %d	 tpblksread %d
File continuation header, ino %d  count %d  tpblksread %d
End of tape header
; predicted %d blocks, got %d blocks
\n
unexpected tape header\n
unknown tape header type %d\n
resync restore, skipped %d blocks\n
Checksum error %o, inode %d file %s\n
Archive was produced by a newer version of vxdump.\nThis vxrestore cannot read this archive format.\nTry a newer version of vxrestore.\n
mktempname: called with TMPNAME
not on ino list
warning: cannot rename %s to %s: %s\n
rename %s to %s\n
newnode: not a node
warning: %s: %s\n
Make node %s\n
removenode: not a node
removenode: non-empty directory
warning: %s: %s\n
Remove node %s\n
removeleaf: not a leaf
warning: %s: %s\n
Remove leaf %s\n
warning: cannot create symbolic link %s->%s: %s\n
warning: cannot create hard link %s->%s: %s\n
linkit: unknown type %d\n
Create symbolic link %s->%s\n
Create hard link %s->%s\n
bad entry:
\nname: %s\n
sibling name: %s\n
next entry name: %s\n
next link name: %s\n
next hashchain name: %s\n
entry type: NODE\n
entry type: LEAF\n
inode number: %ld\n
flags: %s\n
%s is not on the tape\n
y
n
? [yn] 
abort
dump core
Could not seek to archive %d\n
Could not seek to archive %d\n
Could not seek to archive %d\n
Usage:\n    vxtunefs [-p] [-s [ -f tunefstab ] [ -o options ]]\n        [mount point | special ] ...\n\n    where options is a comma separated list of one or more of the following:\n\n\t[read_pref_io=value],\n\t[read_nstream=value],\n\t[read_unit_io=value],\n\t[write_pref_io=value],\n\t[write_nstream=value],\n\t[write_unit_io=value],\n\t[pref_strength=value],\n\t[buf_breakup_sz=value],\n\t[discovered_direct_iosz=value],\n\t[max_direct_iosz=value],\n\t[qio_cache_enable=value],\n\t[write_throttle=value],\n\t[max_diskq=value],\n\t[initial_extent_size=value],\n\t[max_seqio_extent_size=value],\n\t[default_indir_size=value],\n\t[max_buf_data_size=value],\n\t[hsm_write_prealloc=value]\n\n    -o and -f options are mutually exclusive\n    The default tunefstab is %s\n
Not super-user\n
Cannot stat file: %s\n
%s should be a regular file\n
Cannot stat %s: %s\n
%s is not a valid mount point\n
%s is not a valid mount point\n
%s is not a valid device or mount point\n
Cannot open %s: %s\n
Cannot get parameters for %s: %s\n
Cannot set parameters for %s
Cannot open tunefstab %s: %s\n
Cannot find any devices in %s\n
Filesystem i/o parameters for %s\n
failed to set parameters for %s: %s\n
Parameters successfully set for %s\n
 Cannot open tunefstab %s: %s\n
Incorrect entry %s ..., in tunefstab :%s\n
Cannot find entries for %s in %s\n
Incorrect entry: %s\n
Cannot stat %s: %s\n
%s is not a valid mount point\n
%s is not a valid mount point\n
Cannot stat %s: %s\n
%s is not a valid mount point\n
Cannot open %s: %s\n
Cannot get parameters for %s: %s\n
Cannot set parameters for %s
Usage:\n
    %s [-F %s] [generic_options] [-o [force]]\n
             {special | mount_point}\n
FSType %s not recognized\n
illegal -o suboption -- %s\n
cannot open mnttab\n
cannot lock mnttab\n
%s not found in mnttab\n
cannot open %s: %s\n
cannot set force unmount for %s: %s\n
cannot exec /sbin/umount for %s: %s\n
cannot upgrade to version 2 with quotas\n
upgrade to version 4 if you need quotas\n
cannot open %s: %s\n
cannot stat %s: %s\n
%s is not a mountpoint\n
%s is not the root inode of a vxfs file system\n
cannot statvfs %s: %s\n
%s is not a vxfs file system\n
%s is mounted read only\n
%s is not a mountpoint in /etc/mnttab\n\tand the raw device cannot be deduced.\n\tuse [-r] to specify a raw device\n
filesystem %s doesn't match filesystem super-block on %s\n
use [-r] to specify a raw device\n
%s: vxfs file system version %d layout
 with quotas
\n
cannot open %s: %s\n
cannot lock %s - %s\n
lock for %s is held by pid %d\n
cannot upgrade %s - %s\n
usage: vxupgrade [-o quota|noquota], [-n new_version] [-r rawdev] mount_point\n
new_version must be <= %d\n
%s: current version is %d; no upgrade possible.\n
%s: upgrade to version %d not supported.\n
%s:  current version is %d.\n\tCan only upgrade to version %d (with or without quotas).\n
%s: current version is %d with quotas.\n\tCan only upgrade to version %d.
%s: current version is %d without quotas.\n\tCan only upgrade to version %d with quotas or version %d.\n
%s: current version is %d 
with quotas.\n\tCan only upgrade to %d\n
without quotas.\n\tCan only upgrade to version %d with quotas or version %d.\n
usage: vxupgrade [-o quota|noquota], [-n new_version] [-r rawdev] mount_point\n
new_version must be <= %d\n
%s: current version is %d; no upgrade possible.\n
%s: upgrade to version %d not supported.\n
%s:  current version is %d.\n\tCan only upgrade to version %d (with or without quotas).\n
%s: current version is %d with quotas.\n\tCan only upgrade to version %d.
%s: current version is %d without quotas.\n\tCan only upgrade to version %d with quotas or version %d.\n
%s: current version is %d 
with quotas.\n\tCan only upgrade to %d\n
without quotas.\n\tCan only upgrade to version %d with quotas or version %d.\n
 usage: vxupgrade [-n new_version] [-r rawdev] mount_point\n
new_version must be <= %d\n
%s: current version is %d; no upgrade possible.\n
 %s:  current version is %d; can only upgrade to version %d.\n
Cannot open %s\n
Cannot stat %s\n
Incorrect type of %s\n
Cannot open %s\n
Cannot stat %s\n
Incorrect type of %s\n
Cannot open %s\n
Error in %s at line: %d\n
Error opening %s\n
Error in making ioctl on %s\n
Cannot stat mountpoint %s\n
Mount point %s is not a directory\n
No corresponding device for %s\n
Usage:\n
    qioadmin mount_point\n
    qioadmin -s qioadminfile mount_point\n
    qioadmin -S file={ON|on|OFF|off},... mount_point\n
    qioadmin -p [filelist file] mount_point\n
    qioadmin -P file,... mount_point\n
Cannot open %s\n
No corresponding mount point for %s\n
No corresponding mount point for %s\n
absolute pathname found in %s at line %d\n
No corresponding entries found for %s [%s]\n
 -e and -r are mutually exclusive\n
 -e and -r are mutually exclusive\n
 -e or -r cannot be used with other options\n\n
 file '%s' already exists.\n
 file '%s' already exists.\n
 cannot create %s.\n
%s is not on a vxfs file system\n
 file '%s' already exists.\n
 file '%s' already exists.\n
 cannot create %s - 
 '%s' file allocation error - %s\n
%s symlink creation failure - 
invalid size specification\n
while following %s lstat failed for %s - %s\n
while following %s readlink failed for %s - %s\n
too many symlinks encountered while following %s - %s\n
%s is not on a vxfs file system\n
cannot open %s - %s\n
cannot get attributes for %s - %s\n
cannot shrink a file\n
the resulting file size is bigger than %s\n
 '%s' file allocation error - %s\n
the resulting file size is bigger than %s\n
cannot statvfs %s - 
Usage: %s -s size [ -h [ headersize ]] [ -a ] <file>\n       %s [ -e | -r ] size <file>\n
Usage: %s [-i interval [-c count ]] [-r] [-l] file ... \n
Bad timer value: %s\n
Timer value %s: out of range\n
Cannot get current time: %s\n
-i must precede -c\n
Invalid numeric value: %s\n
Illegal option -- %c\n
	   OPERATIONS	       FILE BLOCKS    AVG TIME(ms)\n
	   CACHE STATISTICS\n
	 READ	  WRITE	     READ     WRITE   READ  WRITE\n
			CREAD	 PREAD	    HIT RATIO\n
FILE NAME	    
Cannot open file %s\n
Out of memory: %s\n
qiotrace %s failed, error %d\n
usage: %s %s\n
usage: %s %s\n
 trace buffer is overflown\n
 copied %d trace records\n
Line %s in %s is invalid\n
Line %s in %s is invalid\n
Cannot link file %s to %s\n
Problem writing file %s\n
file %s: QuickLog device %s QuickLog volume %s does not exist\n
file %s: QuickLog device %s QuickLog volume %s does not exist\n
file %s: QuickLog device %s QuickLog volume %s does not exist\n
File %s locked by command %s (pid %d)\n
Cannot unlink file %s\n
ql_ntoken = %d\n
ql_tokens[%d] = %s\n
ql_tokens[%d] = (null)\n
Device %s: Invalid super block 1\n
Device %s: No valid super block\n
Volume %s is DIRTY -- Cannot attach\n
ioctl QL_CFG_QUERY failed: %s\n
ioctl QL_CFG_DEFINE failed: %s\n
Volume %s does not belong to a diskgroup,\n\tbut %s is assigned to diskgroup %s\n
Volume %s belongs to\n\t%s diskgroup, but %s is assigned to diskgroup %s\n
ioctl QL_CFG_QUERY failed: %s\n
QuickLog volume %s already attached to log device %s\n
ioctl QL_CFG_ATTACH failed: %s\n
ioctl QL_CFG_QUERY failed: %s\n
ioctl QL_CFG_DETACH failed: %s\n
ioctl QL_CFG_REMOVE failed: %s\n
Cannot malloc %d bytes: %s\n
MAX_TRACE too small\n
Cannot malloc %d bytes: %s\n
MAX_TRACE too small\n
Freeing address %8.8x which is not in the trace buffer\n
Freeing address %8.8x (Length freed %d allocated %d)\n
Num tokens > QL_MAXTOKENS (%d)\n
Cannot open file %s\n
Cannot open file %s\n
Problem reading file %s: %s\n
Problem writing file %s: %s\n
Cannot open device %s\n
Cannot lseek device %s to block number %d: %s\n
Cannot read device %s: %s\n
Cannot write device %s: %s\n
Invalid device %s\n
%s is not a QuickLog device\n
Cannot stat device %s: %s\n
%s is not a character device\n
Invalid diskgroup name\n
Invalid diskgroup name\n
Cannot stat device %s: %s\n
ioctl BLKGETSIZE failed on device %s: %s\n
Invalid partition on disk %s\n
QuickLog volume %s is too small (32Mb minimum required)\n
QuickLog volume %s is too big (Using the first 2Gb)\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a char/block special file\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a block special file\n
ioctl DKIOCINFO failed on device %s: %s\n
ioctl DKIOCGAPART failed on device %s: %s\n
Invalid partition on disk %s\n
QuickLog volume %s is too small (32Mb minimum required)\n
QuickLog volume %s is too big (Using the first 2Gb)\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a character special file\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a block special file\n
The %c flag can only be used with the remove keyword\n
-g option can only appear once\n
-g option can only be used with remove\n
Usage: qlogadm [-Vf] [-g diskgroup] keyword [arguments]\n
\tkeywords and arguments are:\n
\t\tremove qlogdev\n
\t\tattach qlogdev qlogvol\n
\t\tdetach qlogdev qlogvol\n
\t\tcleaner qlogdev\n
\t\tflush qlogdev\n
\t\tenabled qlogdev fsvol\n
\t\tquery qlogdev\n
\t\tstart qlogdev fsvol\n
\t\tstop qlogdev fsvol\n
\t\tsuspend qlogdev fsvol\n
\t\tresume qlogdev fsvol\n
Invalid number of arguments\n
Invalid number of arguments\n
Invalid keyword %s\n
ioctl %s failed: %s\n
Try using the \"-f\" option to force removal of QuickLog device %s\n
Cleaner is already running for %s\n
ioctl QL_CLS_CLEANER failed: %s\n
%s is not enabled\n
%s is enabled\n
Invalid magic number\n
Invalid VxFS version\n
Invalid magic number\n
Invalid VxFS version\n
-a option is incompatible with -g option\n
-g option can only appear once\n
Usage:\n
\t%s [-Vr] -a\n
\t%s [-V] [-g diskgroup] [qlogdev] qlogvol\n
Name must be %s or %s not %s\n
-a option cannot be used with any other arguments\n
Must supply the -a option or a log volume\n
-r option can only be used with qlogattach -a\n
More than 1 QuickLog volume called %s\n
QuickLog volume %s not found\n
QuickLog volume %s is attached to\nQuickLog device %s, not %s\n
QuickLog volume %s is already attached to QuickLog device %s\n
QuickLog volume %s does not belong to diskgroup %s\n
QuickLog volume %s is not currently attached\n
QuickLog volume %s does not belong to diskgroup %s\n
ioctl QL_CFG_QUERY failed for %s: %s\n
Cannot detach log device %s; file systems still mounted\n
Cannot get major/minor number of device %s\n
ioctl QL_CFG_DETACH failed for %s: %s\n
Cannot get major/minor number of device %s\n
Usage: qlogck [-Vfr] [qlogdev]\n
Rewriting configuration file %s
Removing configuration file %s
Error removing file %s\n
Remove manually before remounting\n
Checking QuickLog device %s\n
Searching for 1st QuickLog volume\n
Cannot open any QuickLog volumes for device %s\n
Found QuickLog volume %s\n
Allocating memory for volumes\n
Allocating memory for volume %s\n
Opening QuickLog device %s\n
QuickLog device %s: maps are corrupted\n
QuickLog device %s: maps are corrupted\n
QuickLog device %s: maps are corrupted\n
Opening QuickLog volume %s\n
QuickLog device %s: super blocks of QuickLog volume %s are corrupted\n
QuickLog device %s: super blocks out of sync\n
QuickLog device %s: super blocks out of sync\n
QuickLog device %s: maps of QuickLog volume %s are corrupted\n
Recovering QuickLog device %s\n
Recovering QuickLog volume %s\n
QuickLog volume %s succesfully recovered (%d sectors)\n
Checking if QuickLog device %s is clean\n
VxFS volume %s is clean\n
VxFS volume %s is dirty\n
QuickLog device %s is dirty\n
QuickLog device %s is clean\n
Writing back QuickLog device %s\n
Writing back VxFS volume %s\n
VxFS volume %s was successfully written back (%d sectors)\n
QuickLog device %s: Cannot read super block 1 of QuickLog volume %s\n
QuickLog device %s: super block 1 of QuickLog volume %s corrupted\n
QuickLog device %s: Cannot read super block 2 of QuickLog volume %s\n
QuickLog device %s: super block 2 of QuickLog volume %s corrupted\n
QuickLog device %s: Cannot read maps 1 of QuickLog volume %s\n
QuickLog device %s: Cannot read maps 2 of QuickLog volume %s\n
Rebuilding QuickLog device %s\n
Rebuilding QuickLog volume %s\n
Cleaning QuickLog device %s\n
Cleaning QuickLog volume %s\n
Closing QuickLog device %s\n
Closing QuickLog volume %s\n
Rebuilding config file for QuickLog device %s\n
Removing QuickLog volume %s from config file of QuickLog device %s\n
Adding QuickLog volume %s to config file of QuickLog device %s\n
QuickLog device %s has been unconfigured\n
QuickLog device %s has not been recovered\n
QuickLog device %s has been re-configured\n
QuickLog device %s has been successfully recovered\n
QuickLog volume %s has been unconfigured\n
QuickLog volume %s has not been recovered\n
QuickLog volume %s has been successfully recovered (%d sectors)\n
QuickLog volume %s was clean\n
VxFS volume %s is dirty\n
VxFS volume %s has not been recovered\n
Volume %s is clean\n
VxFS volume %s was dirty\n
VxFS volume %s has been successfully recovered (%d sectors)\n
Checking config file for QuickLog device %s\n
For QuickLog device %s,\n
\tQuickLog volume %s exists in the config file\n
For QuickLog device %s,\n
\tQuickLog volume %s does not exist in the config file\n
Command %s was not successful\n
Fix whatever problem was encountered and rerun\n
the command %s\n\n
Running the command %s with the -f option\n
will fix most of the problem(s) but will force\n
a full consistency check (full fsck)\n
on the VxFS volume(s) which cannot be fixed.\n
Usage: %s [-MSVms] [-b blkno] qlogvol\n
Invalid number of arguments\n
Super block 1\n
Super block 2\n
Most recent super block (1)\n
Most recent super block (2)\n
Map 1\n
Map 2\n
Most recent map (1)\n
Most recent map (2)\n
Data from block number %d\n
Empty maps\n
Start of maps\n
End of maps\n
[%d] vol(%d,%d) blkno %d ==> log(%d,%d) blkno %d\n
Usage: %s [-V] mount_point\n
Usage: %s [-V] [qlogdev] mount_point\n
Name must be %s or %s not %s\n
Invalid mount point\n
%s is not a mounted VxFS file system\n
%s is not a QuickLog enabled file system\n
QuickLog disable of file system %s failed\n
QuickLog enable of file system %s failed\n
VxFS file system %s now has the following options\n
%s is already enabled on qlog device %s\n
-g option can only appear once\n
Usage: %s [-Vn] [-g diskgroup] qlogdev special\n
Volume %s does not belong to diskgroup %s\n
Volume %s does not belong to diskgroup 'no diskgroup'\n
QuickLog volume %s is already attached to QuickLog device %s\n
QuickLog volume %s is already set up on QuickLog device %s\n
ioctl QL_CFG_QUERY failed on device %s: %s\n
Volume %s belongs to diskgroup %s, but %s is assigned to%s\n
Volume %s belongs to diskgroup %s, but %s has no diskgroup assigned to it\n
Volume %s doesn't belong to a diskgroup, but %s is assigned to diskgroup %s\n
QuickLog device %s already has 4 volumes attached\n
Volume %s is a mounted file system (%s)\n
Usage: %s [-V] [[-c] qlogdev]\n
\tUse '[/dev/qlog/]vxlog[1-31]'\n
A device must be specified to use the -c flag\n
ioctl QL_CFG_QUERY failed: %s\n
RUNNING\n
%sCleaner state: RUNNING\n
NOT RUNNING\n
%sCleaner state: NOT RUNNING\n
%sstate: %s\n
%sstate: %s\n
The device %s is not configured\n
There are no QuickLog devices active\n
options -a, -r and -s are mutually exclusive\n
options -a, -r and -s are mutually exclusive\n
options -a, -r and -s are mutually exclusive\n
One of the options -a, -r or -s must be specified\n
Usage: %s [-V] -[a|r|s] [diskgroup]\n
Cannot find the %s command\n
Read of super block failed\n
Out of memory\n
List of Log Volumes to Recover\n
Old Device %s Volume %s\n
Cannot update super block for QuickLog volume %s\n
Volume %s already configured\n
Checking if original device on this server is free\n
Setting new log device to original %s\n
Checking for other log volumes on this device\n
Found one! (%s on %s)\n
Reassign to next available log device\n
No devices left!\n
Cannot reassign %s\n
%s is now assigned to %s\n
Didn't find %s in cfg list\n
%s %s %s\n
ioctl QL_CFG_QUERY failed: %s\n
Diskgroup %s is already configured on volume %s\n
-a option is incompatible with -g option\n
-g option can only appear once\n
Usage:\n
\tqlogrm [-V] -a\n
\tqlogrm [-V] [-g diskgroup] [logdev] special\n
The -a option cannot be used with any other arguments\n
Must supply the -a option or a log volume\n
More than 1 QuickLog volume called %s\n
QuickLog volume %s not found\n
QuickLog volume %s is attached to\nQuickLog device %s, not %s\n
ioctl QL_CFG_DETACH failed: %s\n
Invalid count %s\n
Invalid count %s\n
Invalid interval %s\n
Invalid interval %s\n
-l option can only appear once\n
Usage: %s [-Vdfv] [-l qlogdev] [-c count] [-i interval]\n
ioctl QL_LOG_STAT failed: %s\n
\n%s\n
%-16s %5s %5s %5s %5s %5s %5s %5s %5s %5s %5s\n
QD %-13s %5.1lf %5.1lf %5.1lf %5.1lf %5.2lf %5.2lf\n
QV %-13s %5.1lf %5.1lf %5.1lf %5.1lf %5.2lf %5.2lf\n
FS %-13s %5.1lf %5.1lf %5.1lf %5.1lf %5.2lf %5.2lf %5.1lf %5.1lf %5.2lf %5.2lf\n
ioctl QL_TRC_SET failed: %s\n
QuickLog trace is set to %s\n
ioctl QL_TRC_UNSET failed: %s\n
QuickLog trace now set to %s\n
ioctl QL_TRC_SET failed: %s\n
QuickLog trace now set to %s\n
ioctl QL_TRC_SET failed: %s\n
ioctl QL_TRC_SET failed: %s\n
Printing QuickLog trace %s\n
ioctl QL_TRC_READ failed: %s\n
%-20s %d %6.6d %-20s %-10s %8.8x %8.8x %8.8x %8.8x\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Options -v, -e, -d and -p are mutually exclusive\n
Usage:\n
\t%s [-V] -v\n
\t%s [-V] -d trcopt,...\n
\t%s [-V] -e trcopt,...\n
\t%s [-V] -p trcopt,...\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Options -v, -e, -d and -p are mutually exclusive\n
Usage:\n
\t%s [-V] -v\n
\t%s [-V] -d trcopt,...\n
\t%s [-V] -e trcopt,...\n
\t%s [-V] -p trcopt,...\n
cluster reservation failed for volume %s\n
cannot stat %s: %s\n
cannot determine character device for %s\n
cannot open %s: %s\n
could not determine disk capacity of %s: %s\n
no space allocated to %s\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a character special file\n
Invalid device %s\n
Cannot stat device %s: %s\n
Device %s is not a block special file\n
Volume %s is a mounted file system (%s)\n
Name must be %s or %s not %s\n
Invalid mount point\n
%s is not a mounted VxFS file system\n
%s is not a QuickLog enabled file system\n
QuickLog disable of file system %s failed\n
QuickLog enable of file system %s failed\n
VxFS file system %s now has the following options\n
%s is already enabled on qlog device %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Invalid option %s\n
%s option can appear only once\n
Options -v -e -d and -p are mutually exclusive\n
Usage:\n
\t%s [-V] -v\n
\t%s [-V] -d trcopt,...\n
\t%s [-V] -e trcopt,...\n
\t%s [-V] -p trcopt,...\n
Name must be %s or %s not %s\n
Invalid mount point\n
%s is not a mounted VxFS file system\n
%s is not a QuickLog enabled file system\n
QuickLog disable of file system %s failed\n
QuickLog enable of file system %s failed\n
VxFS file system %s now has the following options\n
%s is already enabled on qlog device %s\n
Volume %s is a mounted file system (%s)\n
malloc failed: %s %s\n
malloc failed: %s %s\n
failed to get aclcnt for %s\n
failed to get acl entries for %s\n
failed to set acl entries on %s\n
checkpoint or mountpoint does not exist\n
mountpoint does not have this checkpoint\n
checkpoint is currently mounted.\n
checkpoint %s already exists\n
QuickLog volume %s is too small (41Mb minimum required)\n
QuickLog volume %s is too small (41Mb minimum required)\n
		[ioerror={mwdisable|wdisable|nodisable|disable}]\n
bad ioerr type: %s\n
conflicting option cluster and ioerror=%s\n
[vxldlog=special]\n
[qlog=special]\n
Cannot open '%s'.\n
Cannot use vxldlog= suboption for root file system.\n
Cannot use vxldlog= suboption for root file system.\n
Path %s is too long for Quicklog to handle.\n
Cannot stat %s.\n
%s not a block device.\n
Cannot open '/dev/qlog/admin'.\n
Cannot malloc %d bytes.\n
Cannot malloc %d bytes.\n
Path %s is too long for QuickLog to handle.\n
%s is not a character or a block special device.\n
Cannot stat %s.\n
Cannot issue QL_LOG_GETDEV ioctl.\n
Cannot create pipe: %s\n
Cannot create pipe: %s\n
%s is not the root inode\n
Failed to get status of %s\n
Failed to find %s fileset\n
This option is only valid on mounted device\n
cannot close %s\n
%s Invalid device name\n
not supported for this fs version\n
'-o ckpt=<ckpt_name>' incompatible with other options\n
'-o ckpt=<ckpt_name>' incompatible with other options\n
'-o ckpt=<ckpt_name>' incompatible with other options\n
can not find mountpoint for %s\n
Usage:\ndf [-F vxfs] [generic_options] [-o {s | snapstat | ckpt= | ckptall}] [directory | special ...]\n
Usage:\nncheck [-F vxfs] [generic_options] \n\t[-i ilist] [-a] [-s] [-o m,b=#,[block=#[-#]],\n\t\t[sector=#[-#]],[surface[=#[-#],]]|ckpt=<ckpt_name>]]\n\t\t\t [special ...]\n
Usage:\nncheck [-F vxfs] [generic_options] \n\t[-i ilist] [-a] [-s] [-o m,b=#,[block=#[-#]],\n\t\t[sector=#[-#]],[surface[=#[-#],]]|ckpt=<ckpt_name>]]\n\t\t\t [special ...]\n
Usage:\n	ncheck [-F vxfs] [-V] [-i ilist] [-a] [-s] [-o [m],[b=#],\n	       [block=#[-#]],[sector=#[-#]],[surface[=#[-#],]]|ckpt=<ckpt_name>] special ...\n
sectors must be positive and <= %s (%d TB)\n
Not enough space available on QuickLog device %s\n
No QuickLog device available with %d blocks free\n
Not enough space available on QuickLog device %s\n
No QuickLog device available with %d blocks free\n
sectors must be positive and <= %s (%d TB)\n
%s is currently %s sectors\n
failed to read %s, %d, 0x%x\n
failed to write43 %s, %d, 0x%x\n
failed to write at %s bytes %d errno %d from 0x%x\n
failed to write45 %s, %d (%d), 0x%x\n
failed to write46 %s, %d, 0x%x\n
vxbmap_enter %s failed 0x%x\n
vxbmap_enter %s failed 0x%x\n
conflicting suboptions: \"ro\" and \"mincache=%s\".\n
can not read stdin\n
Couldn't stat on %s\n
%s is not a directory\n
%s fileset not found\n
-f option can not be used with -k option\n
[-b] option may not be used with [-DEcdefko] options\n
[-o] option may not be used with [-DEcdefkb] options\n
	  [-p passes] [-t time] [-k ckptname] path_of_mountpoint\n
    fsadm [-F vxfs] [-DEde] [-f] filename | - \n
-f option can not be used with -k option\n
[-b] option may not be used with [-DEcdefko] options\n
[-o] option may not be used with [-DEcdefkb] options\n
	  [-p passes] [-t time] [-k ckptname] path_of_mountpoint\n
    fsadm [-F vxfs] [-DEde] [-f] filename | - \n
-f option can not be used with -k option\n
[-b] option may not be used with [-DEcdefko] options\n
[-o] option may not be used with [-DEcdefkb] options\n
	  [-p passes] [-t time] [-k ckptname] path_of_mountpoint\n
    fsadm [-F vxfs] [-DEde] [-f] filename | - \n
bad icache size\n
failed to mapalloc\n
failed to find inum %d\n
failed to find inum %d\n
%d: invalid flg 0x%x\n
failed to find inum %d\n
failed to vxfsl1_auget %d\n
failed on inum %d\n
inode %d is unknown
failed to find inum %d\n
%d: not a directory 0x%x\n
inum %d out of range\n
failed to read %d, %d, 0x%x\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to vxfsl1_auget %d\n
can't allocate multiple
failed to allocate multiple of 8K\n
AU out of range %d\n
Bad AU magic 0x%x, 0x%x\n
au out of range %d\n
failed to vxfsl1_auget %d\n
Invalid inum %d\n
bad icache size\n
failed to mapalloc.\n
failed to imapalloc.\n
failed to find inum %d\n
failed to read attributes of ino %d
failed to find inum %d\n
%d: invalid flg 0x%x\n
failed to find inum %d\n
failed to find inum %d\n
%d: not a directory 0x%x\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to vxfsl2_auget %d\n
can't allocate multiple
failed to allocate multiple of 8K\n
AU out of range %d\n
Bad AU magic 0x%x, 0x%x\n
AU out of range %d\n
bad icache size\n
failed to mapalloc.\n
failed to imapalloc.\n
failed to find inum %d\n
failed to read attributes of ino %d
failed to find inum %d\n
%d: invalid flg 0x%x\n
failed to find inum %d\n
failed to find inum %d\n
%d: not a directory 0x%x\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to vxfsl3_auget %d\n
can't allocate multiple
failed to allocate multiple of 8K\n
AU out of range %d\n
AU out of range %d\n
unsupported oltentry\n
failed to read blk %d\n
Bad AU magic 0x%x, 0x%x\n
failed to vxfsl23_iauget %d\n
failed on inum %d
inode %d is unknown
inum %d out of range\n
failed to read
Buffer overrun
Invalid directory entry: %d %d %d\n
failed to convert attr of inode %d\n
failed to alloc%d blks\n
failed to write %d, %d\n
Usage: qlogclustadm [-V] keyword [arguments]\n
\t\t master qlogdev\n
\t\t release qlogdev\n
Invalid number of arguments\n
Invalid keyword %s\n
Could not master device %s: %s\n
Could not release device %s: %s\n
unable to open device file\n
unable to read device file\n
unable to access device file\n
unable to write device file\n\tYou should specify the \"-o ro\" option to mount a read-only device.\n\tYou should also specify the \"-o seconly\" option or the \"-o crw\" option\n\tto cluster mount a read-only device.\n
Invalid HostId: %s\n
Cannot open qlog admin device.\n
Sun cluster option not available.\n\t\tCheck Solaris release level and cluster licensing.\n
\t\t query qlogdev\n
\t\t showmaster qlogdev\n
\t\t showstatus qlogdev\n
\t\t showfrzinitiator qlogdev\n
Could not query %s: %s\n
Could not query %s: %s\n
Could not query %s: %s\n
Could not query %s: %s\n
invalid hostid number\n
Cannot open: %s: %s\n
Could not master %s: %s\n
Cannot open: %s: %s\n
Could not release %s: %s\n
Cannot open: %s: %s\n
Could not query %s: %s\n
Couldn't stat on %s\n
option is only valid for directory/files\n
showchngblk operation failed for %s\n
Failed to print blockinfo for %s
cannot open %s - errno %d
Failed to print blockinfo for %s\n
fsckpt_fopen failed: %s\n
fsckpt_fbmap failed on %s at offset %lld\n
unable to determine if file system on device %s is snapped : %s\n
Cannot open: %s: %s\n
Could not recover %s: %s\n
Cannot open %s: error: %s\n
\t\t recover qlogdev\n
\t\t recoverdg qldg\n
Could not query %s: %s\n
Cannot recover dg %s: %s\n
cannot malloc directory data block list\n
cannot malloc immediate directory data block list\n
cannot malloc name list\n
non-zero return from %s, quota is not updated.\n
File %s is on a different filesystem\n
Error occurred whilst traversing %s: %s\n
File %s is on a different filesystem\n
Error occurred whilst traversing %s: %s\n
File %s is on a different filesystem\n
Error occurred whilst traversing %s: %s\n
(%s (partial)) 
Ignoring the u flag for partial dumps\n
no problem
vxfs-plugin internel error
open failed
stat failed
vxfs kernel does not support vxms
no vxfs license for vxms feature
not a vxfs mountpoint
statvfs failed
not a vxfs file system
memory allocation failed
not a vxfs plugin object
action not supported for this object
ioctl failed
getdents failed
buffer too small
readlink failed
mkdir failed
mknod failed
unlink failed
link failed
rmdir failed
symlink failed
file system create (mkfs) failed
utime failed
exec of command failed
command terminated abnormally
file not open for mapping
bad mkfs options
bad mount options
bad tunables options
no such device
not a device
no such directory
not a directory
file not on this file system
directory not on this file system
cannot link directory
cannot create: file exists
bad file name
invalid file type
cannot create
Unrecognized attribute version.\n
Failed to set acls: Source platform unsupported
attribute for acls
Failed to set acls
cannot determine device size
no file systems mounted
no vxms kernel
chmod failed
chown failed
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
vxfs-plugin: (unknown error)
%s: stdout:\n
%s: stderr:\n
%s: file index %d\n
Add cache entry for %s\n
size mismatch: new %d old %d\n
mntcache not inited before kstate check\n
%s root inode index %s\n
kernel version %d\n
%s: get configid inode %d, errno %d\n
translation of configid failed\n
%s: get extent, errno %d\n
Attempt to restore attributes on a file opened by index.\n
%s: stat fset, errno %d\n
%s: open by handle, errno %d\n
%s: VX_GETEXT, errno %d\n
%s: list extended attrs, errno %d\n
%s: get extended attrs, errno %d\n
Failed to restore attributes -- block size mismatch source/target.\n
wrong version for extended attrs\n
%s: set extended attrs, errno %d\n
file preallocation for %s -- VX_SETEXT ioctl failed\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
vxfs-plugin: (unused message)\n
\t\t cleanse qlogdev\n
%s: %d files selected\n
insufficient memory for immediate\n\tdirectory data \"block\" list\n
immediate directory data \"block\" list\n
insufficient memory for directory\n\tdata block list\n
directory data block list\n
link space\n
insufficient memory for name list\n
name list\n
-i inumber list\n
Cannot stat device %s: %s\n
%s is not a character special file\n
Clearing volume [%s] from [%s]\n
Could not recover device[%s]\n
%s is not a shared cvm volume\n
Cannot open admin device %s: %s\n
Cluster state not INITED.\n
Cannot issue QL_ADMIN_IOCTL %s\n
Log volume %s already attached to device %s\n
              [cluster[,ioerror=nodisable,crw]]\n
    qiostat [-i interval [-c count ]]\n
            [-r] [-l]\n
            [-o local] file ... \n
illegal -o suboption -- %s\n
VX_GRPQUOTAON failed on quota file \"%s\"\n
VX_GRPQUOTAON failed on quota file \"%s\"\n
cannot open quota file \"%s\" for quotactl\n
cannot open quota file \"%s\" for quotactl\n
cannot open \"%s\" for quotactl\n
VX_QUOTAON failed on quota file \"%s\"\n
cannot open quota file \"%s\" for quotactl\n
cannot open \"%s\" for quotactl\n
Cannot open %s: %s\n
snapof= should be followed by a vxfs mount point\n
You have too many processes\n
fork failed: %s\n
%s:%s exec failed: %s\n
can't mount a checkpoint before mounting the file system first\n
no such group %s\n
invalid gid %d\n
no such group %s\n
no disk quota for gid 0\n
%s: unknown group\n
no disk quota for %s (gid 0)\n
Cannot turn on user quotas on %s\n
Cannot turn on group quotas on %s\n
%s: group quotas turned off\n
%s: group quotas turned on\n
malloc failed: %s\n
Could not find block device corresponding to %s\n
Inode bitmap of grp desc at #%x unreadable\n
Block bitmap of grp desc at #%x unreadable\n
Block bitmap of group desc at #%x unwritable\n
bad icache size\n
failed to mapalloc.\n
failed to find inum %d\n
failed to read blk %d\n
failed to find inum %d\n
%d: invalid flg 0x%x\n
failed to find inum %d\n
failed to read bp %d\n
failed to ext2_bgget %d\n
failed on inum %d\n
inode %d is unknown (mode 0x%x), ignore? (ynq)
failed to find inum %d\n
%d: not a directory 0x%x\n
inum %d out of range\n
failed to read %d,%d,0x%x\n
failed to read blk %d\n
Buffer overrun %d, %d\n
Invalid super magic 0x%x\n
Invalid mark bit 0x%x\n
failed to ext2_bgget %d\n
can't allocate multiple of 8K\n
failed to allocate multiple of 8K\n
block out of range %d\n
block out of range %d\n
failed to ext2_bgget %d\n
Invalid inum %d\n
failed to ext2_bgget %d\n
Usage:\nvxenablef [-e full] \n
Unable to enable VxFS feature %s.  errno %d\n
Unrecognized license for feature %s\n
Failed to check the license, errno %d\n
System is not licensed\n
%s is not licensed\n
System is licensed for features\n
Usage: vxgetfacl [-ad] file(s)\n
Cannot get aclcnt for %s: %s\n
malloc of space for acls of %s failed\n
Cannot get acls for %s: %s\n
Cannot stat file: %s\n
cannot find mnttab\n
cannot open mnttab\n
cannot lock mnttab\n
Usage:\n
\tvxsetfacl -d acl_entries file\n
\tvxsetfacl -m acl_entries file\n
\tvxsetfacl -s acl_entries file\n
malloc of space for argument list failed\n
Num entries > MAX_ACL_ENTRIES (%d)\n
Illegal acl entry %s\n
Unrecognized entry type %s\n
Unrecognised user id/name %s\n
Unrecognised group id/name %s\n
Unrecognized character found in mode field\n
failed to set acl entries: %s\n
malloc of space for existing acls failed %s\n
%s: failed to get acl entries, %s\n
failed to set acl entries: %s\n
malloc of space for acl list failed %s\n
Only USER/GROUP entries can be deleted\n
More than one user owner entry\n
More than one group owner entry\n
More than one mask entry\n
More than one other entry\n
Duplicate user or group entries\n
Missing user/group owner, other, mask entry\n
acllist validation failed\n
Usage: qlogclustadm [-v] keyword [arguments]\n
Unable to set unbuffered I/O for %s: %s\n
Memory allocation of %d bytes failed: %s\n
 clear VX_IEREORG flag? (ynq)
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
Invalid entry: %s=%s\n
version number must be %d or %d\n
Disk layout version older than version 4 will not be supported\nin the next release. Please upgrade to disk layout version 4.\nFor more details, please refer the release notes.\n
Disk layout version older than version 4 will not be supported\nin the next release. Please upgrade to disk layout version 4.\nFor more details, please refer the release notes.\n
Must specify disk, filesystem or files to dump\n
You cannot use the T flag for full or partial (zero level) dumps.\n
Cannot find file or filesystem %s\n
Filesystem %s is not clean, it requires running fsck with \"-o full\" option\n
Filesystem %s is not clean, there may be data corrupted during the process of vxdump\n
Usage:\n    vxdump [-clnuwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] files-to-dump\nor\n    vxdump [0123456789fustdWwnlcb [argument]] files-to-dump\n
Usage:\n    vxdump [-clnouwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] files-to-dump\nor\n    vxdump [0123456789fustdWwnolcb [argument]] files-to-dump\n
Usage:\n    vxdump [-clnouwW] [-0123456789] [-f file_name]\n	    [-d density] [-s size] [-T time] [-b block_size]\n	    [-B records] [-t tracks] files-to-dump\nor\n    vxdump [0123456789fustdWwnolcb [argument]] files-to-dump\n
Usage:\n    vxrestore [-chimrRtvxy] [-s number] [-b block_size]\n              [-e opt] [-f file] [file_name ...]\nor\n    vxrestore {key} [file_name ...]\n
%soption N and suboption p are mutually exclusive\n
%soption N and suboption p are mutually exclusive\n
%soptions N and P(suboption)p are mutually exclusive\n
%ssuboptions full/nolog/mounted and (option)P/p are mutually exclusive\n
%soptions V and P/(suboption)p are mutually exclusive\n
Cluster mount is not supported on a non-CVM volume\n\t\ton a file system layout version less than 4,\n\t\tor GAB/GLM modules are not loaded,\n\t\tor vxfsckd daemon is not running.\n
              [cluster[,ioerror=nodisable,crw]]\n
Cluster mount is not supported on a non-CVM volume\n\t\ton a file system layout version less than 4,\n\t\tor GAB/GLM modules are not loaded,\n\t\tor vxfsckd daemon is not running,\n\t\tor qlogckd daemon is not running.\n
sectors must be >= %lld as they are currently in use.\n
%s no vxfs file systems with %s file\n
%s: Group quotas are not supported for this disk layout version\n
%s: user quotas turned off\n
%s: user quotas turned on\n
%s: user quotas are not enabled, usage info may be out of date\n
%s: groups quotas are not enabled, usage info may be out of date\n
[version=#] [quota|noquota|usrquota|grpquota] [align=#]\n                          [largefiles|nolargefiles]\n
grpquota option can be specified with version 5 or later layouts only\n
                [quota|usrquota|grpquota]\n
cannot open quota file \"%s\" for quotactl\n
VX_GRPQUOTAON failed on quota file \"%s\"\n
Current layout version doesn't support group quotas\n
                [logiosize=size]\n
Disk layout versions older than Version 4 will not be\nsupported in the next release. It is advisable to upgrade\nto disk layout Version 5 now. See vxupgrade(1M) for\ninformation on upgrading a VxFS file system and see the\nVxFS Release Notes for information on disk layout support.\n
Disk layout versions older than Version 4 will not be\nsupported in the next release. It is advisable to upgrade\nto disk layout Version 4 now. See vxupgrade(1M) for\ninformation on upgrading a VxFS file system and see the\nVxFS Release Notes for information on disk layout support.\n
QuickLog volume %s is too big (Using the first 512Gb)\n
QuickLog volume %s is too big (Using the first 512Gb)\n
QuickLog volume %s is too big (Using the first 512Gb)\n
Cannot open portal device: %s\n
this node is a seconly node for %s\n
Duplicate node '%s' in policy\n
vxfs qlogadm: Usage: qlogadm [-Vf] [-g diskgroup] keyword [arguments]\n
vxfs %s: Usage:\n
vxfs %s:Usage: qlogck [-Vcfr] [-v fsvol] [qlogdev]\n
vxfs qlogclustadm: Usage: qlogclustadm [-v] keyword [arguments]\n
vxfs qlogdb: Usage: %s [-MSVms] [-b blkno] qlogvol\n
vxfs %s: Usage: %s [-V] mount_point\n
vxfs %s: Usage: %s [-V] [qlogdev] mount_point\n
vxfs %s: Usage: %s [-Vn] [-g diskgroup] qlogdev special\n
vxfs %s: Usage: %s [-V] [[-c] qlogdev]\n
vxfs %s: Usage: %s [-V] -[c|a|r|s] [diskgroup]\n
vxfs qlogrm: Usage:\n
vxfs %s: Usage: %s [-Vdfv] [-l qlogdev] [-c count] [-i interval]\n
vxfs qlogtrace: Usage:\n
Invalid number of arguments\n
Invalid number of arguments\n
Invalid number of arguments\n
error doing sigprocmask: %s\n
error doing sigaddset: %s\n
%sversion %u blocks %d bsize %d\n
%s is currently %lld sectors - size will be increased\n
%s is currently %lld sectors - size will be reduced\n
%scould not seek to block offset %u failed\n
%scould not read from block offset %u\n
%scould not seek to block offset %u failed\n
%scould not write to block offset %u\n
could not convert %s to raw device\n
open on %s failed\n
layout is not supported on this version of VxVM: %s\n
ioctl failed\n
layout %d is not supported on non VxVM devices: %s\n
sectors must be positive and <= %s (%d TB)\n
filesystem requires a minimum block size of %d\n
%lld sectors, %u blocks of size %d, log size %d blocks\n
%u data blocks, %u free data blocks\n
seek error at block %u\n
write failure at block %u\n
seek error at block %u\n
read failure at block %u\n
version number must be %d or %d or %d\n
sector %lld will  not searched\n
sectors(%lld)
blocks(%u)
directory %u block %d offset %d has bad reclen %d\n
directory %u block %d offset %d has bad namlen %d\n
Device %s already attached.\n
Cannot open %s: Device temporarily unavailable: Try after sometime \n
Cannot open %s: error: %s\n
REG_QLOGCKD ioctl failed: %s\n
QLOG_WAITDEV ioctl failed: %s\n
Cannot create pipe: %s\n
fork failed:%s.\n
Resource temporarily unavailable.\n
Cannot open admin device: %s\n
QLOG_GETDEV ioctl failed: %s\n
Cannot create pipe: %s\n
fork failed:%s\n
Exec qlogrec on diskgroup %s failed:%s.\n
Exec qlogck on device %s failed:%s.\n
Exec qlogck on device %s failed:%s.\n
Exec qlogck on device %s failed:%s.\n
QuickLog Volume %s is attached to Device %s. Cannot attach it to %s.\n
QuickLog Volume %s is attached to Device %s. Cannot detach it from %s.\n
QuickLog Volume %s is not attached to any QuickLog device.\n
An entry for QuickLog volume %s is not present in the config file. Try specifying the device name.\n
The entry for QuickLog device %s and QuickLog volume %s is not present in the config file. Cannot attach.\n
Cannot open admin device %s: %s\n
 Cannot issue QL_ADMIN_IOCTL %s\n
Maximum number of nodes exceeded\n
Present protocol version: %d\n It supports versions: %d %d\n
		   [rw|ro][,crw]\n
		   [seconly]\n
		   [-o [rw|ro][,crw]\n
%sstate: %s\n
%sstate: %s\n
Cannot remove device %s: Device not configured\n
Cannot remove device %s: %s\n
attempt to resize %s to %d sectors failed with errno %d. Filesystem has been resized to %d sectors\n
Retry the operation after freeing up some space\n
failed to get inum 0x%x, %d, 0x%x, %u\n
failed to get fset %d IFQUO for users\n
failed to iinit fset %d IFQUO for users\n
failed to get fset %d IFQUO for groups\n
failed to iinit fset %d IFQUO for groups\n
%s is a critical file; aborting\n
Cannot resolve pathname %s: %s
error processing inode list for fset %ld
error processing inode list for fset %ld
error processing inode list for fset %ld
%s fileset not found
error processing inode list for fset %ld
error processing inode list for fset %ld
error processing inode list for fset %ld
%s fileset not found
failed to process primary inode list for fileset %lu
failed to process attribute inode list for fileset %lu
%s fileset not found
can not find mountpoint for %s
attempt to resize %s failed with errno %d
%s is a critical file; keeping\n
cannot open vxportal :error:%s\n
cannot deinit cfs: error:%s\n
\t\t deinit\n
Cannot open %s: Device temporarily unavailable: Try after sometime.\n
Cannot open %s: %s\n
Cannot unregister qlog: %s.\n
